Poulan 96012009000 Reverse Operation System ROS, To Operate Mower See Fig, To Operate on Hills

Page 12

OPERATION

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

•Depress clutch/brake pedal all the way down and hold.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

•Look down and behind before backing.

•Move gear shift lever to reverse (R) position and slowly release clutch/brake pedal to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

02828

TO OPERATE MOWER (See Fig. 6)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT

LIFT LEVER HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 6

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents PO18542LT ModelSafe Operation Practices for Ride-On Mowers General OperationII. Slope Operation Service III. ChildrenIV. Towing Table of Contents Contents of Hardware Pack Tools Required for Assembly To Remove Tractor from CartonBefore Removing Tractor from Skid Unpack CartonCheck Battery See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Reverse Operation System ROS To Operate Mower See FigTo Operate on Hills To TransportBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Maintenance Schedule Lubrication ChartGeneral Recommendations Before Each USETractor Blade Removal See FigTo Sharpen Blade See Fig Important Special blade bolt is heat treatedBattery EngineBelts Transaxle CoolingCleaning Clean AIR ScreenAIR Filter MufflerTo Install Mower See Fig To Remove Mower See FigTo Level Mower Housing FRONT-TO-BACK Adjustment See FigsBelt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Replace Motion Drive Belt See FigTransaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Adjust Steering Wheel ALIGN- MentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbOther Fuel SystemEngine OIL CylindersTroubleshooting Points Problem Cause CorrectionEngine dies when Outdoor Products Customer Service Dept HOPCanada contact Stevens Creek Road Terry Fox Way Augusta, GA 30907 USAService Notes Only Ride UP and Down Hill Not Across Hill Degrees MAX Fold Along This Dotted Line Degree SlopeParts and Service Changere DE Pièces LES ET L’ENTRETIEN Degrés MAX Dentretien Notes Dept Service Customer Products Outdoor Canada Au AutoriséGarantie cette de exclus sont normal l’entretien et Initiale d’achat date la de compter à jours 90 dixDépannage DE Guide Défectueux estRalenti Entreposage MoteurRéglages ET Révision MoteurCarrossage AVANT/ Roues DES Convergence Tionrec -DI LA DE L’ALIGNEMENT Régler PourVitesses DE Boîte LA DE Mentgechan DE Levier DU Neutre AU RéglageCourroie LA Remplacer Pour Courroie Acer Rempl PourTransmission DE MENTNETRAÎD’EN Freins LES Vérifier PourDE Boîtier LE Niveau DE Mettre Pour SedeutonFig la Voir Tondeuse LA Installer Pour Reglages ET RevisionTracteur Tondeuse LA Enlever PourEntretien Transmission LA DE Refroidissement BatterieLubrification Trapézoïdales CourroiesFig la Voir Lame LA Affiler Fig la Voir Lame LA EnleverEN Fonctionnement DE Système ET Recommandations LES GénéralesLubrification DE Tableau Utilisation Chaque AvantUtilisation Tonte DE ConseilsUtilisé resoiceslac à et terrain au convient qui vitesse Moteur LE Démarrer DE Avant Moteur LE Démarrer Pour’ESSENCE Réservoir LE Remplir Moteur DU D’HUILE Niveau LE VérifierAccessoires Autres ET Charrettes DES Remorquer PourTracteur LE Transporter Pour Pentes LES Dans Utiliser PourGAZ DES Commande LA Utiliser Pour T O S I L I T UTeurtrac Reculer Pour ET Avancer Pour02829 Moteur Montage Correctement Sont Courroies LESToutes SI Vérifier Toutes SI Vérifier NI DE EST Tondeuse LA SI VérifierFig la Voir Batterie LA Vérifier Desmancom des fonction la etPalet LA DE Tracteur LE Retirer Pour DU Tracteur LE Sortir Pour LE Pour Exigés Outils LESPalette LA ToncarMontar SIN Piezas Sommaire Client DU ResponsabilitésProduit DE Spécifications Entretien RemorquageEnfants Général EntretienPentes LES Dans FonctionnementGénéral Fonctionnement Tracteurs des sécurité toute en l’utilisation pour ConseilsAUX Imprimé

424999, 96012009000 specifications

The Poulan 96012009000,424999 is a high-performance chainsaw designed to meet the needs of both professional landscapers and home users. This powerful tool is engineered for efficiency, durability, and ease of use, making it a reliable choice for various cutting tasks, including tree trimming, firewood cutting, and yard maintenance.

One of the standout features of the Poulan 96012009000,424999 is its robust engine. With a potent 42cc two-stroke engine, this chainsaw provides ample power to tackle even the toughest jobs. The engine is designed to produce maximum torque at lower RPMs, which helps to reduce wear while ensuring efficient cutting performance. Its lightweight construction further enhances maneuverability and allows for extended use without causing undue fatigue to the operator.

In addition to its powerful engine, the chainsaw incorporates advanced technologies that promote user comfort and convenience. The ergonomic design features an anti-vibration system that minimizes shock and reduces operator fatigue, allowing for a more enjoyable cutting experience. The wrap-around handle provides improved grip and control, essential for managing the saw during different cutting applications.

Another key characteristic of the Poulan 96012009000,424999 is its easy starting system. The chainsaw is equipped with a simple pull-start mechanism that requires minimal effort, allowing users to get to work quickly without frustration. Additionally, it features an adjustable oiling system, which allows users to control the flow of oil to the chain, ensuring proper lubrication and extending the life of the guide bar and chain.

The 16-inch cutting bar strikes a perfect balance between reach and control, making it versatile enough for a range of cutting tasks. The high-visibility chain saw chain ensures cutting precision, while the built-in chain brake enhances safety by preventing accidental kickback.

Maintenance is made easier with the Poulan 96012009000,424999, as it comes with tool-less chain tensioning, allowing users to quickly and easily adjust the chain tension without the need for additional tools. This feature not only saves time but also ensures optimal performance for every cutting task.

In summary, the Poulan 96012009000,424999 is a powerful, user-friendly chainsaw that combines innovative features and technologies. With its performance-oriented design, ergonomic handling, and features focused on safety and ease of maintenance, this chainsaw stands out as an excellent choice for anyone looking to tackle their cutting needs with confidence and efficiency.
Top Page Image Contents