Poulan 96012006904 manual HOW to USE Your Tractor

Page 11

OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 5)

Your tractor is equipped with an operator presence sens- ing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

Depress clutch/brake pedal into full “BRAKE” position and hold.

Place parking brake lever in “ENGAGED” position and release pressure from clutch/brake pedal. Pedal should remain in “BRAKE” position. Make sure parking brake will hold tractor secure.

 

ATTACHMENT CLUTCH

 

LEVER "ENGAGED"

 

POSITION

THROTTLE/

IGNITION KEY

 

CHOKE

"DISENGAGED"

CONTROL

LEVER

POSITION

 

PARKING BRAKE

"BRAKE"

"ENGAGED"

POSITION

POSITION

 

GEAR SHIFT

CLUTCH/BRAKE

LEVER

PARKING BRAKE

PEDAL "DRIVE"

"DISENGAGED"

POSITION

POSITION

 

FIG. 5

STOPPING (See Fig. 5)

MOWER BLADES -

To stop mower blades,move attachment clutch lever to “DISENGAGED” position.

GROUND DRIVE -

To stop ground drive, depress clutch/brake pedal into full “BRAKE” position.

Move gearshift lever to neutral (N) position.

ENGINE -

Move throttle control between half and full speed (fast) position.

NOTE: Failure to move throttle control between half and full speed (fast) position, before stopping may cause engine to “backfire”.

Turn ignition key to “OFF” position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

Never use choke to stop engine.

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause “browning” of grass. To eliminate this possibility, al- ways stop engine when stopping tractor on grass areas.

CAUTION: Always stop tractor com- pletely, as described above, before leav- ing the operator's position; to empty grass catcher, etc.

TO USE THROTTLE CONTROL (See Fig. 5)

Always operate engine at full throttle.

Operating engine at less than full throttle reduces the battery charging rate.

Full throttle offers the best bagging and mower perfor- mance.

TO MOVE FORWARD AND BACKWARD (See Fig. 5)

The direction and speed of movement is controlled by the gearshift lever.

Start tractor with clutch/brake pedal depressed and gearshift lever in neutral (N) position.

Move gearshift lever to desired position.

Slowly release clutch/brake pedal to start move- ment.

IMPORTANT: BRING TRACTOR TO A COMPLETE STOP BEFORE SHIFTING OR CHANGING GEARS. FAILURE TO DO SO WILL SHORTEN THE USEFUL LIFE OF YOUR TRANSAXLE.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 5)

The position of the attachment lift lever determines the cutting height.

Grasp lift lever.

Press plunger with thumb and move lever to desired position.

The cutting height range is approximately 1-1/2 to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY POSITION OTHER THAN "OFF" WILL CAUSE THE BATTERY TO BE DISCHARGED, (DEAD).

11

Image 11
Contents Model PO17542LTII. Slope Operation Safe Operation Practices for Ride-On MowersGeneral Operation IV. Towing ServiceIII. Children Table of Contents Contents of Hardware Pack Unpack Carton Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Transport Reverse Operation System ROSTo Operate Mower See Fig To Operate on HillsTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Before Each USE Maintenance ScheduleLubrication Chart General RecommendationsImportant Special blade bolt is heat treated TractorBlade Removal See Fig To Sharpen Blade See FigTransaxle Cooling BatteryEngine BeltsMuffler CleaningClean AIR Screen AIR FilterTo Remove Mower See Fig To Install Mower See FigFRONT-TO-BACK Adjustment See Figs To Level Mower HousingTo Replace Motion Drive Belt See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Check BrakeFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment To Start Engine with a Weak Battery See FigTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorCylinders OtherFuel System Engine OILProblem Cause Correction Troubleshooting PointsEngine dies when Stevens Creek Road Terry Fox Way Augusta, GA 30907 USA Outdoor Products Customer Service DeptHOP Canada contactService Notes Suggested Guide for Sighting Slopes for Safe Operation Parts and Service Changere DE Pièces LES ET L’ENTRETIEN Degrés MAX Dentretien Notes Initiale d’achat date la de compter à jours 90 dix Dept Service Customer Products Outdoor Canada AuAutorisé Garantie cette de exclus sont normal l’entretien etDéfectueux est Dépannage DE GuideRalenti Moteur EntreposageMoteur Réglages ET RévisionDE Levier DU Neutre AU Réglage Carrossage AVANT/ Roues DES ConvergenceTionrec -DI LA DE L’ALIGNEMENT Régler Pour Vitesses DE Boîte LA DE MentgechanFreins LES Vérifier Pour Courroie LA Remplacer PourCourroie Acer Rempl Pour Transmission DE MENTNETRAÎD’ENSedeuton DE Boîtier LE Niveau DE Mettre PourTondeuse LA Enlever Pour Fig la Voir Tondeuse LA Installer PourReglages ET Revision TracteurEntretien Trapézoïdales Courroies Transmission LA DE RefroidissementBatterie LubrificationEN Fonctionnement DE Système ET Fig la Voir Lame LA AffilerFig la Voir Lame LA Enlever Utilisation Chaque Avant Recommandations LESGénérales Lubrification DE TableauUtilisé resoiceslac à et terrain au convient qui vitesse UtilisationTonte DE Conseils Moteur DU D’HUILE Niveau LE Vérifier Moteur LE Démarrer DE AvantMoteur LE Démarrer Pour ’ESSENCE Réservoir LE RemplirPentes LES Dans Utiliser Pour Accessoires AutresET Charrettes DES Remorquer Pour Tracteur LE Transporter PourReculer Pour ET Avancer Pour GAZ DES Commande LA Utiliser PourT O S I L I T U Teurtrac02829 Moteur NI DE EST Tondeuse LA SI Vérifier MontageCorrectement Sont Courroies LES Toutes SI Vérifier Toutes SI VérifierPalet LA DE Tracteur LE Retirer Pour Fig la Voir Batterie LA VérifierDesmancom des fonction la et Toncar DU Tracteur LE Sortir PourLE Pour Exigés Outils LES Palette LAMontar SIN Piezas Produit DE Spécifications SommaireClient DU Responsabilités Général Entretien EntretienRemorquage EnfantsTracteurs des sécurité toute en l’utilisation pour Conseils PentesLES Dans Fonctionnement Général FonctionnementAUX Imprimé

96012006904 specifications

The Poulan 96012006904 is a powerful and versatile lawn mower that offers a range of features designed to make lawn care easier and more efficient. This model stands out in the market due to its robust construction and innovative technologies aimed at enhancing mowing performance.

One of the key features of the Poulan 96012006904 is its powerful engine. Equipped with a reliable gas-powered engine, this mower delivers strong torque and efficient cutting performance. This ensures that users can easily tackle various types of grass and terrain without experiencing bogging or stalling.

The mower also boasts a self-propulsion system that allows users to maneuver the equipment effortlessly across their lawn. This feature is incredibly beneficial for maintaining speed and reduces the physical effort required during mowing, particularly on slopes or uneven ground. The adjustable speed settings provide users with the flexibility to match their pace, making the mowing process more comfortable.

Another standout characteristic of the Poulan 96012006904 is its cutting deck, which is designed to provide excellent grass cutting performance. With a generous cutting width, this mower can cover more ground in less time, making it suitable for larger lawns. Moreover, the cutting height adjustment feature provides users with the ability to customize the grass length to their preference, achieving a professional-looking cut.

The mower is also equipped with advanced technology such as a mulching capability, which allows users to finely chop grass clippings and return them to the lawn, promoting healthy growth and reducing the need for additional fertilizers. Furthermore, the rear discharge feature efficiently disperses grass clippings, minimizing windrowing and making clean-up easier.

The Poulan 96012006904 prioritizes user comfort and safety. The ergonomic handle grips provide superior comfort during operation, while the safety features ensure that the mower can only be engaged when properly operated, adding an essential layer of protection.

In conclusion, the Poulan 96012006904 is a standout choice for homeowners seeking a reliable and efficient lawn mower. With its powerful engine, self-propulsion system, adjustable cutting height, and mulching capabilities, it offers an excellent blend of performance and user-friendly features, making lawn maintenance a breeze. Whether tackling tough grass, tackling larger lawns, or simply wanting a well-kept yard, this mower has the capabilities to deliver impressive results.