Poulan 301ZX warranty Battery, Cleaning battery and terminals

Page 35

MAINTENANCE

Battery

Your mower is equipped with a maintenance free battery that does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

See chart for charging times.

Cleaning battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

1.Open the terminal access doors.

2.Disconnect BLACK battery cable first, then the RED battery cable and remove the battery from the machine.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until shiny.

5.Coat terminals with grease or petroleum jelly

6.Reinstall battery.

IMPORTANT INFORMATION

Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws.

Replacing battery

1.Lift seat and rotate forward.

2.Open terminal access doors

3.Using two ½" wrenches disconnect BLACK battery cable then RED battery cable.

4.Using a 7/16 wrench, remove the bolts on either side of the terminal guard and lift off guard.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall battery terminal guard.

8.First connect RED battery cable to positive (+) battery terminal with hex bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and hex nut.

10.Close access doors.

11.Lower seat.

Always use protective glasses when handling the battery.

STANDARD

STATE

APPROXIMATE BATTERY CHARGING TIME*

 

 

TO FULL CHARGE AT 80OF / 27OC

BATTERY

OF

 

 

 

 

 

Maximum Rate at:

 

 

 

 

 

 

CHARGE

 

 

 

 

 

50 Amps

30 Amps

20 Amps

10 Amps

 

 

 

 

 

 

 

 

12.6V

100%

- FULL CHARGE -

 

 

 

 

 

 

12.4V

75%

20 min.

35 min.

48 min.

90 min.

 

 

 

 

 

 

12.2V

50%

45 min.

75 min.

95 min.

180 min.

 

 

 

 

 

 

12.0V

25%

65 min.

115 min.

145 min.

280 min.

 

 

 

 

 

 

11.8V

0%

85 min.

150 min.

195 min.

370 min.

 

 

 

 

 

 

*Charging time depends on battery capacity,

condition, age, temperature and efficiency of charger

WARNING!

Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

2

1

2

CZ-22

1.Terminal guard

2.Access doors

Battery cleaning and installation

35

Image 35
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsRemove key before General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentKeep children away from work area Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Throttle Control Ignition SwitchParking Brake Fuel Tank Choke ControlAlways use the high position F to transport Fuel Shut Off ValveMower Deck Lifting Lever TrackingBypass Linkage Blade Control LeverSteering OperationTraining Starting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Weak BatteryJumper cables Running Operating on Hills Mowing Tips Stopping the Engine Moving Machine By Hand Maintenance Schedule Maintenance100 300 Year Always use protective glasses when handling the battery BatteryCleaning battery and terminals Tire Pressures Safety SystemDeck Belt Deck Belt ReplacementBelts Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckCaster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LubricationTransmission Front Wheel MountFront Wheel Bearings Deck SpindleProblem Cause TroubleshootingTroubleshooting Winter Storage ServiceStorage Schematic Standard Hardware Technical DataTorque Specifications Equipment Overall dimensionsEngine TransmissionUSA Requirements Conformity CertificatesDelivery Service Service JournalAfter 5-10 Hours Hour ServicePerform the 25-hour service At Least Once Each Year Service Journal
Related manuals
Manual 24 pages 51.72 Kb

301ZX specifications

The Poulan 301ZX is a standout in the realm of zero-turn riding mowers, offering an array of features and technologies designed for optimal performance and user comfort. This mower is engineered for both residential and light commercial use, making it a versatile choice for homeowners and professionals alike.

At the heart of the Poulan 301ZX is its powerful 24 horsepower Briggs & Stratton engine. This robust power plant ensures efficient operation, allowing users to tackle even the most challenging mowing tasks with ease. The V-twin configuration provides reliable power delivery and improved durability, facilitating a smooth mowing experience on various terrains.

One of the defining characteristics of the 301ZX is its zero-turn capability. This technology enables the mower to pivot around its axis, facilitating sharp turns and allowing users to navigate around obstacles effortlessly. This feature significantly reduces mowing time, as users can cut in tight spaces without needing to make multiple passes.

The 301ZX is equipped with a 54-inch cutting deck, which provides excellent coverage in a single pass. The deck is designed with a robust construction, featuring reinforced areas to withstand the rigors of mowing. Users can adjust the cutting height with ease, thanks to the convenient lever that offers multiple height settings, accommodating various grass types and desired lengths.

Comfort and ease of use are priorities in the design of the Poulan 301ZX. The padded ergonomic seat ensures a comfortable riding experience, even during extended mowing sessions. The intuitive control panel provides easy access to essential functions, such as throttle and blade engagement, enhancing user convenience.

Another noteworthy feature is the maintenance-friendly design of the Poulan 301ZX. The mower incorporates easily accessible components, allowing for straightforward maintenance procedures. Regular tasks such as oil changes and blade sharpening become less cumbersome, ultimately extending the life of the machine.

In summary, the Poulan 301ZX is a powerful and efficient zero-turn riding mower with a host of features designed for optimal performance. Its robust engine, zero-turn technology, spacious cutting deck, and user-friendly design make it an excellent choice for those seeking a reliable mowing solution. Whether for residential lawns or light commercial use, the 301ZX stands out as a top contender in its category.