Poulan 402495 manual Service and Adjustments, Tractor See Fig, To Remove Mower, To Install Mower

Page 21

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

•Depress brake pedal fully and set parking brake.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR (See Fig. 27)

TO REMOVE MOWER

•Place attachment clutch in “DISENGAGED” position.

•Lower attachment lift lever to its lowest position.

•Disengage belt tension rod (K) from lock bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and re- lease slowly.

•Remove mower belt from electric clutch pulley (M).

•Disconnect front link (E) from mower - remove retainer spring and washer.

•Go to either side of mower and disconnect mower suspension arm (A) from chassis and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers.

•Go to other side of mower and disconnect the suspen- sion arm and rear lift link.

CAUTION: After rear lift links are discon- nected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever.

•From right side of mower, disconnect anti-sway bar (S) from right rear mower bracket (D) - remove retainer spring and washer and pull mower toward you until the bar falls from the hole in bracket.

•Turn tractor steering wheel to the left as far as it will go.

•Slide mower out from under right side of tractor.

TO INSTALL MOWER

Follow procedure described in “INSTALL MOWER AND DRIVE BELT” in the Assembly section of this manual.

TO LEVEL MOWER

Make sure tires are properly infl ated to the PSI shown on tires. If tires are over or under infl ated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 28)

•With all tires properly infl ated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

NOTE: As desired, you can raise the low side of mower or lower the high side.

LB

M

K

F

A

E

H

S

C

D

FIG. 27

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Always Wear EYE Protection During Operation PBGT22H54Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationService III. ChildrenIV. Towing Table of Contents Mower Mower Front Wheel Unassembled PartsSlope Sheet KeysTools Required for Assembly AssemblyTo Remove Tractor from Carton Unpack CartonFirst Install ANTI-SWAY BAR S Install Mower and Drive Belt7/16 Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Reverse Operation System ROS on Position Know Your TractorStopping HOW to USE Your TractorTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigSystem Characteristics To USE Cruise Control -J See FigUsing the Reverse Operation System Service REMINDER/HOUR MeterReverse Operation System ROS To Operate on HillsCheck Engine OIL Level Before Starting the EngineADD Gasoline To Start Engine See FigMowing Tips Lubrication Chart MaintenanceTractor BatteryBrake Operation TiresEngine Engine OIL Filter CleaningMuffler Spark PlugsTo Install Mower Service and AdjustmentsTractor See Fig To Remove MowerTurn nut right Turn nut left To raise mower To Replace Mower Blade Drive Belt To Check BrakeTo Replace Motion Drive Belt Front Wheel TOE-IN/CAMBER To Start Engine with a Weak Battery See FigTo Remove Wheel for Repairs See Fig To Attach Jumper CablesTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbOther StorageFuel System Engine OILTroubleshooting Points Engine dies when Page Limited Warranty Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationParts and Service

402495 specifications

The Poulan 402495 is a versatile and efficient chainsaw designed for both casual users and seasoned professionals. Known for its reliability and ease of operation, this model stands out in the competitive market of outdoor power equipment.

One of the main features of the Poulan 402495 is its powerful 40cc two-stroke engine. This engine provides ample power for a range of tasks, from light trimming to more intensive cutting. The engine is designed to deliver a robust performance while maintaining fuel efficiency, making it an economical choice for users who require consistent usage over time.

In addition to its powerful engine, the Poulan 402495 incorporates the revolutionary OxyPower technology. This innovative technology is engineered to increase engine efficiency by optimizing the combustion process. As a result, users can expect reduced emissions and improved fuel economy, which aligns with the growing demand for environmentally friendly power tools.

Another notable feature is its lightweight design, which contributes to excellent maneuverability and ease of handling. The chainsaw weighs in at a manageable level, allowing users to work for extended periods without experiencing excessive fatigue. This is particularly advantageous for professionals and homeowners who have larger cutting jobs ahead of them.

Safety is also a priority in the design of the Poulan 402495. It comes equipped with a chain brake that instantly stops the chain in the event of kickback, providing an additional layer of protection. The model also incorporates a low vibration system that minimizes operator fatigue and enhances comfort during prolonged use.

Moreover, the Poulan 402495 features an automatic oiling system that ensures the chain remains lubricated during use. This not only prolongs the life of the chain but also ensures smooth operation and minimal wear. The tool-less chain tensioning mechanism allows for quick adjustments, making it convenient for users to maintain optimal chain performance without needing extra tools.

In summary, the Poulan 402495 is an excellent choice for those seeking a reliable, efficient, and user-friendly chainsaw. With its powerful engine, advanced OxyPower technology, safety features, and ease of maintenance, it is a formidable tool for a variety of cutting tasks, making it a favorite among homeowners and professionals alike.
Top Page Image Contents