Poulan 191603 manual Know Your Tractor, LIGHT SWITCH POSITION - Turns the headlights on and off

Page 12
KNOW YOUR TRACTOR

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

 

Attachment

Ignition Switch

 

Light Switch Position

Ammeter

Clutch Lever

 

 

Lift Lever

 

 

Plunger

Throttle/Choke

 

 

Control

 

Attachment

 

 

Lift Lever

Clutch/

 

 

Brake

 

 

Pedal

 

 

Parking Brake Lever

Gearshift Lever

Our tractors conform to the safety standards of the

American National Standards Institute.

ATTACHMENT CLUTCH LEVER - Used to engage the mower blades, or other at- tachments mounted to your tractor.

ATTACHMENT LIFT LEVER - Used to raise, lower, and adjust the mower deck or other attachments mounted to your tractor. CLUTCH/BRAKE PEDAL - Used for declutching and braking the tractor and starting the engine.

GEARSHIFT LEVER - Selects the speed and direction of tractor.

IGNITION SWITCH - Used for starting and stopping the engine.

LIFT LEVER PLUNGER - Used to release attachment lift lever when changing its position.

LIGHT SWITCH POSITION - Turns the headlights on and off.

PARKING BRAKE LEVER - Locks clutch/ brake pedal into the brake position. THROTTLE/CHOKE CONTROL - Used for starting and controlling engine speed.

AMMETER - Indicates charging (+) or discharg- ing (-) of battery.

12

Image 12
Contents Assembly Operation Maintenance Service and Adjustments Storage Troubleshooting Repair PartsMODEL NO. CN1842STA 18.0 HP 42 INCH LAWN TRACTORTABLE OF CONTENTS WARRANTYLIMITED WARRANTY SAFETY RULES I. GENERAL OPERATIONII. SLOPE OPERATION Wash hands after handlingIV. SERVICE III. CHILDRENDO NOT SAFETY RULES PRODUCT SPECIFICATIONS CUSTOMER RESPONSIBILITIESUNASSEMBLED PARTS Steering WheelSlope Sheet KeysASSEMBLY/PRE-OPERATION TOOLS REQUIRED FOR ASSEMBLYHOW TO SET UP YOUR TRACTOR INSTALL SEATCHECK BATTERY INSTALL MULCHER PLATE If previously removed CHECKLISTTO CONVERT TO BAGGING OR DISCHARGING CHECK TIRE PRESSUREOPERATION LIGHT SWITCH POSITION - Turns the headlights on and off KNOW YOUR TRACTORHOW TO USE YOUR TRACTOR TO ADJUST MOWER CUTTING HEIGHTENGINE TO SET PARKING BRAKEBEFORE STARTING THE ENGINE TO OPERATE MOWERTO OPERATE ON HILLS TO TRANSPORTTO START ENGINE MOWING TIPSMAINTENANCE GENERAL RECOMMENDATIONSBEFORE EACH USE BATTERY TRACTORBRAKE OPERATION TIRESCLEAN AIR SCREEN ENGINETRANSAXLE COOLING V-BELTSCLEANING MUFFLERSPARK PLUGS IN-LINE FUEL FILTERSERVICE AND ADJUSTMENTS TO INSTALL MOWERTO REMOVE MOWER TO LEVEL MOWER HOUSING TO CHECK AND ADJUST BRAKE TO REPLACE MOWER BLADE DRIVE BELTTO REPLACE MOTION DRIVE BELT With parking brake “Engaged”TO ADJUST STEERING WHEEL ALIGN- MENT TO START ENGINE WITH A WEAK BATTERYFRONT WHEEL TOE-IN/CAMBER TO REMOVE WHEEL FOR REPAIRSTO ADJUST CARBURETOR REPLACING BATTERYTO ADJUST THROTTLE CONTROL CABLE TO REPLACE HEADLIGHT BULBBATTERY STORAGEOTHER FUEL SYSTEMTROUBLESHOOTING CHART PROBLEMLoss of power CAUSEto run when oper continuedExcessive vibrationBattery will not when turningPoor grass dischargeSUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION FOLDALONG THIS