Poulan 188695 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral (N) position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 13)

Mower will be easier to remove from the right side of trac- tor.

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Remove small retainer spring, and remove clutch spring off pulley bolt.

•Remove large retainer spring, slide collar off and push housing guide out of bracket.

•Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

•Disconnect suspension arms from rear deck brackets by removing retainer springs.

•Disconnect front links from deck by removing retainer springs.

•Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONTLINKSANDHOOKTHECLUTCHSPRINGINTOSQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 13)

•Raise attachment lift lever to its highest position.

•Slide mower under tractor with deflector shield to right side of tractor.

•Lower lift lever to its lowest position.

•Connect front links to mower deck and secure with retainer springs.

•Connect suspension arms to rear deck brackets and secure with retainer springs.

•Connect anti-swaybar to chassis bracket and secure with retainer spring.

SMALL

RETAINER SPRING

FLAT WASHER

CLUTCH SPRING

SUSPENSION ARMS

SQUARE HOLE

SMALL RETAINER SPRING

ENGINE PULLEY

 

CLUTCH SPRING

FRONT LINK

RETAINER SPRING

ANTI-SWAY BAR

RETAINER SPRINGS

 

(BOTH SIDES)

COLLAR

 

HOUSING GUIDE

LARGE RETAINER

02695

DEFLECTOR SHIELD

 

SPRING

 

 

 

 

BRACKET

 

FIG. 13

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Model NO. PO15538A General Operation Safety RulesIV. Service II. Slope OperationSafety Rules Table of Contents Unassembled Parts Steering Wheel SeatTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidHOW to SET UP Your Tractor Install Seat See FigCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigGeneral Recommendations MaintenanceLubrication Chart Before Each USETires TractorBrake Operation Operator Presence SystemBelts BatteryEngine Transaxle CoolingAIR Filter CleaningClean AIR Screen MufflerService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig To Start Engine with a Weak Battery See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERInterlocks and Relays Replacing Battery See FigsTo Replace Headlight Bulb To Replace FuseTo Adjust Choke Control To Remove Hood and Grill Assembly See FigTo Adjust Throttle Control Cable To Adjust CarburetorFuel System StorageOther Engine OILTroubleshooting Points With attachment clutch Schematic Tractor - Model Number PO15538AElectrical KEY Part Description Chassis Repair Parts Drive KEY Part NO. NO. Description Steering KEY Part Description Engine Optional Equipment Spark ArresterSeat 1712Decals Wheels & TiresMower Lift Mower Deck Repair Parts Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

188695 specifications

The Poulan 188695 is a powerful and reliable chainsaw designed to meet the demanding needs of both professionals and homeowners. Known for its robust performance and user-friendly features, this model stands out in the competitive chainsaw market.

One of the main features of the Poulan 188695 is its powerful engine. It is equipped with a high-performance 50cc two-stroke engine that provides ample power for tackling various cutting tasks. Whether you're felling trees, pruning branches, or cutting firewood, the Poulan 188695 can handle it all with ease. The engine is also designed for efficient fuel consumption, making it economical for extended use.

Another significant characteristic of the Poulan 188695 is its lightweight design. Weighing in at just around 12 pounds, this chainsaw is easy to maneuver, reducing operator fatigue during long cutting sessions. The balanced design also enhances control and stability, allowing for precise cuts, even in challenging positions.

The Poulan 188695 features a 18-inch bar and chain, which strikes a perfect balance between reach and control. This length is ideal for tackling medium-sized trees and allows for versatility in various cutting applications. The bar and chain are designed for durability, ensuring that users can rely on them for repeated use without experiencing excessive wear.

In terms of technology, the Poulan 188695 incorporates an automated oiler system that keeps the chain adequately lubricated during operation. This system helps to extend the life of the chain and bar, reducing maintenance needs and downtime. Additionally, the chainsaw features an easy-access air filter, allowing for quick cleaning and replacement, which is essential for maintaining optimal performance.

Safety is also a priority in the design of the Poulan 188695. It comes equipped with safety features such as a chain brake and low-vibration technology, which help to minimize the risk of accidents and enhance user comfort. The ergonomic handle design also provides a secure grip, further promoting safe operation.

Overall, the Poulan 188695 is an excellent choice for those seeking a reliable and efficient chainsaw. With its powerful engine, lightweight design, and user-friendly features, it is well-suited for a variety of cutting tasks, making it a valuable addition to any toolbox. Whether you are a seasoned professional or a weekend warrior, the Poulan 188695 is designed to deliver performance and reliability.
Top Page Image Contents