ADJUST VOLUME...
ROOM PLACEMENT...
5.Set the overall volume control of the preamplifier or receiver to a comfortable level. Adjust the subwoofer’s Volume control ❻ (Fig. 10) until you obtain a pleasing blend of bass. Bass response should not overpower the room but rather be adjusted so there is a harmonious blend across the entire musical range. Many users have a tendency to set the subwoofer vol- ume too loud, following the belief that a subwoofer is there to produce lots of bass. This is not entirely true. A subwoofer is there to enhance bass, extending the response of the entire system so the bass can be felt as well as heard. However, overall balance must be maintained; otherwise, the music will not sound natural. An experienced listener will set the volume of the subwoofer so its impact on bass response is always there but is never obtrusive.
6.Room placement of the subwoofer is also an important aspect of its installation. It may be necessary for you to try various locations in your listening room before you choose the final location. Some possible starting points include: behind the
In general, the closer the subwoofer is to walls and corners, the greater the effect of low- frequency enhancement. Experiment with its placement and Volume control until you are pleased with the result you obtain from your particular application.
A WORD OF ADVICE
The Volume control may be set anywhere within its rotation. However, it will be most unusual if you have to turn the Volume control completely clockwise. This may indicate an unbalanced condition in your system (too much bass) or an especially large room, or room placement may not be correct. Try several other locations before concluding that the Volume control must be set at maximum.
CARE OF YOUR SPEAKER SYSTEM
The satellites and powered subwoofer enclosures do not require any routine maintenance. When needed, use a soft cloth, dampened with water only, to remove any fingerprints or to wipe off dust. Clean the grille by gentle vacuuming or with a damp cloth.
NOTE: Do not use any cleaning products or polishes on the enclosures or grilles.
IN CASE OF TROUBLE
Before consulting your dealer, try these simple troubleshooting steps:
•If the sound quality is distorted, listen to each speaker separately.
•If distortion is present in both, the problem is probably somewhere else in your system.
•If only one channel is distorted, switch the left and right speaker leads at the receiver.
•If the distortion moves to the other speaker, the problem is not in the speaker.
•If you need further assistance, contact your local Infinity retail dealer.