HORIZONTAL MOUNTING...
Figure 6. This illustration shows how to mount the speaker horizontally on a wall or ceiling four different ways.
For horizontal mounting, fasten the #6 wood screws (not included) to a wall stud, leaving a 3 ⁄16" clearance between the base of the screw head and the wall. If desired, loosen the bracket screw, adjust the bracket angle, and tighten the bracket screw.
NOTE: You may want to route the wires before tightening the bracket screw (see Figure 8 on page 11).
Then orient the speaker horizontally, align the crossholes on the rear of the speaker with the screws, and slide the speaker down. Rotate the logo to match the orientation of the speaker.
HORIZONTAL MOUNTING USING BRACKET
(rear view)
3/16"
wall
wood screw
#6 Wood Screws | (side view) |
(fasten to wall stud) |
|
❶Loosen Screw
Screw | ❷ Rotate Bracket |
(inside hole) |
❸Tighten Screw
Slide Speaker Down
Onto Wood Screws
Positions
(side view)
20° Tilt Up | 45° Tilt Up | 67.5° Tilt Up | 90° Tilt Up |
(Bracket Closed) | (Bracket Open, | (Bracket Open, | (Bracket Open, |
| Position #1) | Position #2) | Position #3) |
10 ◆