Poulan XT185H42LT manual Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 8

ASSEMBLY

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See“TO LEVEL MOWER HOUSING”in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the fi gures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THATYOU RECEIVE THE BEST PER- FORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly infl ated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANS- PORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is fi lled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before oper- ating your tractor for the fi rst time. Follow proper start- ing and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents XT185H42LT Always Wear EYE Protection During OperationSafety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Slope Sheet Unassembled PartsSteering Wheel Seat Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig Using the Reverse Operation SystemTo Operate Mower See Fig Reverse Operation System ROSBefore Starting the Engine To Transport See FigsCheck Engine OIL Level ADD GasolineAutomatic Transmission Warm UP Mowing TipsPurge Transmission Maintenance Lubrication ChartTo Sharpen Blade See Fig TractorBlade Removal See Fig Engine Cleaning Service and Adjustments To Install Mower See FigTo Level Mower Housing To Remove Mower See FigBelt Removal Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Check and Adjust Brake See Fig Transaxle Motion Control Lever Neutral Adjustment See FigTo Adjust Brake To Replace Motion Drive Belt See FigTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel ALIGN- MentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Limited Warranty Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service

XT185H42LT specifications

The Poulan XT185H42LT is a robust riding lawn mower designed for homeowners seeking efficiency and reliability in their lawn care routine. With its powerful engine and user-friendly features, the XT185H42LT is an excellent choice for maintaining medium to large-sized lawns.

At the heart of the XT185H42LT is its high-performance 18.5 horsepower Briggs & Stratton engine. This engine provides ample power to tackle thick grass and uneven terrain, ensuring a clean and even cut every time. The engine is designed for durability and easy maintenance, with features that simplify oil changes and filter replacements.

The mower boasts a 42-inch steel cutting deck, which allows for wider cutting paths, reducing the number of passes needed to mow the lawn. This feature not only saves time but also enhances efficiency. The cutting deck offers a range of cutting heights, which can be easily adjusted to suit different grass types and conditions, ensuring optimal performance throughout the mowing season.

One of the standout technologies included in the XT185H42LT is its infinitely variable speed transmission. This allows users to control the mowing speed seamlessly, adapting to varying lawn conditions and ensuring that even challenging areas can be mowed effectively. The raceway steering makes maneuverability effortless, allowing the user to navigate around obstacles like flower beds, trees, and garden ornaments with ease.

Comfort and convenience are key aspects of the XT185H42LT. The mower features an ergonomic seating position, with a plush high-back seat designed to reduce fatigue during longer mowing sessions. Easy-access controls are strategically placed to allow for smooth operation, and the built-in cup holder adds a touch of convenience for extended use on warm days.

Additional features include a quick-release deck for easy cleaning and maintenance, as well as a mulching capability that finely chops clippings, returning vital nutrients to the lawn. Overall, the Poulan XT185H42LT combines power, efficiency, and user comfort, making it a versatile choice for homeowners looking to optimize their lawn maintenance efforts. Whether tackling daily mowing tasks or handling larger projects, the XT185H42LT delivers performance and reliability every time.
Top Page Image Contents