Poulan 178249 owner manual Tools Required for Assembly, To Remove Tractor from Carton

Page 6

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1)

Tire pressure gauge

 

 

(2)

9/16" wrenches

(1)

Utility knife

(1)

1/2" wrenches

(1)

3/4" socket w/drive ratchet

(1)

Pliers

 

 

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton.

•Cut, from top to bottom, along lines on all four corners of carton, and lay panels flat.

•Remove mower and packing materials.

•Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

•Remove locknut and large flat washer from steering shaft.

•Position front wheels of the tractor so they are pointing straight forward.

•Slide the steering sleeve over the steering shaft.

•Align tabs and press steering sleeve extension into bottom of steering wheel.

•Position steering wheel so cross bars are horizontal (left to right) and slide onto steering wheel adapter.

•Secure steering wheel to steering shaft with locknut and large flat washer previously removed. Tighten securely.

•Snap steering wheel insert into center of steering wheel.

•Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

STEERING WHEEL

INSERT

LOCK NUT

LARGE FLAT WASHER

STEERING WHEEL

STEERING

WHEEL

ADAPTOR

TABS

STEERING

WHEEL EXTENTION

STEERING

SHAFT

STEERING

SLEEVE

FIG. 1

HOW TO SET UP YOUR TRACTOR

CHECK BATTERY (See Fig. 2)

•Lift hood to raised position.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in CUSTOMER RESPONSIBILITIES section of this manual for charging instructions).

LABEL

FIG. 2

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents DPR22H46STB General Operation IV. ServiceSafe Operation Practices for Ride-On Mowers II. Slope OperationSafety Rules Table of Contents Unassembled Parts HOW to SET UP Your Tractor AssemblyTools Required for Assembly To Remove Tractor from CartonInstall Seat See Fig To Attach Nose Roller See FigAssemble Gauge Wheels to Mower Deck See Fig To SET UP Your Mower for Mulching See FigTo Install Mulcher Plate See Fig To Convert to Bagging or DischargingInstall Mower and Drive Belt See Figs Check for Proper Position of ALL Belts Check Tire PressureCheck Mower Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Towing Carts and Other ATTACH- Ments Before Starting the EngineTo Operate on Hills Check Engine OIL LevelADD Gasoline To Start Engine See FigPurge Transmission Mowing Tips Mulching Mowing TipsGeneral Recommendations Lubrication ChartCustomer Responsibilities Before Each USETractor Engine Spark Plugs CleaningMuffler Engine OIL FilterTo Level Mower Housing Service and AdjustmentsTo Install Mower To Remove Mower See FigTo Replace Mower Drive Belt To Replace Mower Blade Drive Belt See FigTo Adjust Brake See Fig Transaxle Motion Control Lever Neutral Adjustment See FigTo Replace Motion Drive Belt See Fig To Start Engine with a Weak Battery See Fig Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Replace Headlight Bulb Replacing Battery See FigTo Remove Hood and Grill Assembly See Fig Interlocks and RelaysTo Adjust Throttle Control Cable See Fig To Adjust Choke Control See FigTo Adjust Carburetor Fuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionOFF Service Notes Schematic Tractor Model Number DPR22H46STBElectrical 17720408 178450178861 Chassis and Enclosures 175582 174619174997 175692X428Drive 72140608 175417178289 175456Steering Assembly 155105 175121177883 175146164067 Control Throttle EngineSpark Arrester 148315Seat Assembly 178249 DecalsWheels & Tires 178250Mower Lift Mower Deck 74780616 17608419131312 175746Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Sighting GuideParts and Service

178249 specifications

The Poulan 178249 is a robust and versatile chainsaw designed for both professional and residential use. Renowned for its reliability and efficiency, this model stands out in the competitive market of outdoor power tools. One of the main features of the Poulan 178249 is its powerful 18-inch bar and chain, which allows users to tackle a wide range of cutting tasks, from firewood preparation to tree trimming.

Equipped with a 42cc 2-cycle engine, the Poulan 178249 provides ample power while maintaining a manageable weight, making it easier to handle for extended periods. The lightweight design is coupled with an ergonomic handle that offers comfort and control, reducing strain on the user’s hands and arms during operation. This makes the chainsaw particularly suitable for both seasoned professionals and occasional users.

One of the standout technologies in the Poulan 178249 is its Easy Start system, which significantly reduces the effort needed to start the engine. This feature is especially beneficial for those who may struggle with traditional pull-start mechanisms, allowing for a smoother experience right from the beginning of use. Additionally, the chainsaw comes with an integrated air filtration system that prolongs the life of the engine by ensuring cleaner airflow, which helps maintain optimal performance over time.

Another characteristic that sets the Poulan 178249 apart is its built-in chain brake safety feature. This critical component halts chain movement in the event of kickback, providing an added layer of protection for users. The adjustable chain tensioning system also allows for quick and easy adjustments on the go, ensuring that the chain remains properly tightened for efficient cutting.

Moreover, the Poulan 178249 has a translucent fuel tank that enables users to easily monitor fuel levels, reducing the risk of running out of fuel mid-task. This user-friendly design, along with the chainsaw’s durable construction, makes it suitable for various cutting applications in different environments.

In summary, the Poulan 178249 combines powerful performance, advanced technology, and user-oriented features, making it an excellent choice for anyone looking to invest in a reliable chainsaw. Whether you are maintaining your yard, clearing storm debris, or preparing firewood for the winter, this model is equipped to handle the demands of the job.
Top Page Image Contents