Poulan XT19H42YT manual To Install Mower See Figs

Page 19

SERVICE AND ADJUSTMENTS

•Slide mower out from under right side of tractor.

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front link (E) and rear lift liks (C) from tractor.

TO INSTALL MOWER (See Figs. 18-21)

Be sure tractor is on level surface and engage parking brake.

•Lower attachment lift lever to it's lowest position.

CAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position.

NOTE: Be sure mower side suspension arms (A) are point- ing forward before sliding mower under tractor.

•Slide mower under tractor until it is centered under tractor.

•ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer and retainer spring.

•Repeat on opposite side of tractor.

A

B

FIG. 18

•ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring.

•Repeat on opposite side of tractor.

C

D

E

FJ

H

FIG. 20

•Push clutch cable housing guide (P) into bracket, slide collar (L) onto guide and secure with retainer spring

(K).

•Hook end of clutch cable spring (Q) into hole in idler arm (R).

•Install belt onto engine pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

M

FIG. 21

•Raise attachment lift lever to highest position.

•If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.

FIG. 19

•ATTACH FRONT LINK (E) - Work from left side of trac- tor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F).

•Insert end of link (E) into hole in front mower bracket

(H) and secure with washer and retainer spring (J). 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Always Wear EYE Protection During Operation XT19H42YTII. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIII. Children ServiceIV. Towing Table of Contents Unpack Carton AssemblyUnassembled Parts To Remove Tractor from CartonCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor To USE Throttle Control D See Fig HOW to USE Your TractorTo SET Parking BRAKESee Fig StoppingTo Operate Mower To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Move Forward and Backward See FigTo Transport See Figs Before Starting the EngineReverse Operation System ROS To Operate on HillsAutomatic Transmission Warm UP ADD GasolineTo Start Engine See Fig Purge TransmissionMowing Tips Before Each USE MaintenanceTires BatteryTractor Brake OperationEngine Spark Plugs CleaningEngine OIL Filter MufflerTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs To Level Mower To Check Brake To Replace Mower Drive Belt See FigTo Replace Motion Drive Belt See Fig To Attach Jumper Cables To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting Points Engine dies when Limited Warranty Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationPage Parts and Service

XT19H42YT specifications

The Poulan XT19H42YT is a robust and versatile lawn tractor designed to meet the needs of both homeowners and landscaping professionals. With its powerful engine and comprehensive features, this model offers exceptional performance and durability for various mowing tasks.

At the heart of the XT19H42YT is a reliable 19 horsepower engine. This engine provides the necessary power to handle larger lawns and more challenging terrains with ease. It is designed for optimal fuel efficiency, allowing for extended run times without the need for frequent refueling. Coupled with an automatic transmission, users can experience a smooth and effortless driving experience, making it easy to navigate through tight spaces and around obstacles.

One of the standout features of the XT19H42YT is its 42-inch cutting deck. This mid-sized deck is ideal for mowing in various conditions, allowing users to cut a wide swath with each pass. The cutting height is easily adjustable, providing the flexibility to achieve the desired length for different grass types or seasonal changes. The deck is also designed for enhanced airflow, which promotes a clean and even cut while preventing clumping.

Another impressive characteristic of the Poulan XT19H42YT is its Hydrostatic transmission. This technology allows for seamless speed adjustments without the need for shifting gears, enabling the operator to maintain full control over the tractor's speed depending on the mowing conditions. This feature is especially useful when transitioning between different terrain types or navigating around trees and flower beds.

The XT19H42YT also includes ergonomic features such as an adjustable high-back seat, offering comfort during extended mowing sessions. The easy-access controls ensure that everything from starting the engine to adjusting the cutting height is within easy reach, enhancing the overall user experience.

The tractor is equipped with sturdy construction and reliable components that contribute to its longevity and performance. With a steel chassis and reinforced cutting deck, the Poulan XT19H42YT is built to withstand the rigors of regular use, making it a solid investment for any lawn care enthusiast.

In summary, the Poulan XT19H42YT stands out with its powerful 19 horsepower engine, efficient hydrostatic transmission, and versatile 42-inch cutting deck. Its robust build quality and user-friendly features make it an excellent choice for anyone looking to maintain their lawn with efficiency and ease.
Top Page Image Contents