Poulan PPB3416AV Operation, Know Your Chain SAW, ON/STOP Switch Throttle Trigger, On/Stop

Page 8

3.Using bar tool, roll chain around guide bar to ensure all links are in bar groove.

4.Lift up tip of guide bar to check for sag. Release tip of guide bar, then turn ad- justing screw 1/4 turn clockwise. Repeat until sag does not exist.

Adjusting Screw -- 1/4 Turn

5.While lifting tip of guide bar, tighten bar nuts securely with the bar tool.

Bar Nuts

6.Use the screwdriver end of the bar tool to move chain around guide bar.

7.If chain does not rotate, it is too tight. Slightly loosen bar nuts and loosen chain by turning the adjusting screw 1/4 turn counterclockwise. Retighten bar nuts.

8.If chain is too loose, it will sag below the guide bar. DO NOT operate the saw if the chain is loose.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

OPERATION

KNOW YOUR CHAIN SAW

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

Chain

 

Front Hand Guard

Front Handle

 

Adjustment Tool

 

 

 

 

Starter Rope

 

(Bar Tool)

 

 

 

 

 

 

 

 

 

 

 

 

 

ON/STOP

Choke/

 

 

 

 

Switch

 

Chain

Muffler

 

Fast Idle

 

 

Lever

Bar

Bar Oil Fill Cap

 

 

 

 

Sprocket

 

 

 

 

 

Hole

Starter Housing

Fuel Mix Fill Cap

Primer Bulb

 

 

Cylinder Cover

 

 

 

 

Throttle

 

Chain

 

Chain

Lockout

 

Brake

 

Direction

 

 

 

 

of Travel

Rear

 

 

 

 

 

Adjusting Screw

 

 

Handle

 

 

 

 

 

 

 

 

 

 

Chain

Guide Bar

Throttle

 

 

 

Clutch Cover

Catcher

 

 

Trigger

Bar Nuts

 

 

 

 

ON/STOP SWITCH

THROTTLE TRIGGER

 

The ON/STOP SWITCH is used to stop the

The THROTTLE TRIGGER controls engine

engine.

 

speed.

 

 

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Manual de Instrucciones Manuel d’Instructions Tions found in this manual Starting ReminderPlan Ahead Operate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackReduce the Chance of Kickback Maintain ControlAvoid Pinch-Kickback Avoid Pull-InKickback Safety Features Chain Brake and CKA AngleChain saws as set by Ansi B175.1 If your hand slips off the front handlebarAssembly Attaching the BAR & Chain If notChecking the tension Adjusting the tensionChain Tension ON/STOP Switch Throttle Trigger OperationKnow Your Chain SAW ON/STOPThrottle LOCK-OUT Chain Brake CHOKE/FAST Idle LeverPrimer Bulb Before Starting EngineImportant Points to Remember Starting a Warm EngineDifficult Starting or starting a flooded engine Right Foot Through Rear HandleBraking function control Caution The chain brake must be Inertia activating function controlOperating Tips Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeCutting a Fallen Tree Important PointsBucking Using a LOG or Support Stand Bucking Without a SupportLimbing and Pruning Important Points LimbingService Inspect and Clean Unit and Decals Clean AIR FilterCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelStorage Load Adjustment Engine EngineOther Empty fuel tank and refill withLimited Warranty Ligations The U.S. Environmental

PPB3416AV, PPB3416, PPB4218 specifications

The Poulan PPB3416, PPB4218, and PPB3416AV are versatile products designed to meet the needs of various landscaping and yard maintenance tasks. Each model provides users with reliable performance and innovative features that facilitate efficient operation, making them popular choices among homeowners and professionals alike.

The Poulan PPB3416 is known for its lightweight design and ease of use. This model features a 16-inch bar and chain, making it suitable for cutting small to medium-sized branches and shrubs. The powerful 33cc two-cycle engine delivers ample power for clean and precise cuts, ensuring users can accomplish their tasks without hassle. One of the standout features of the PPB3416 is its Easy Start system, which allows for quick and effortless starting, even after extended periods of inactivity. Additionally, the automatic chain oiler keeps the chain properly lubricated for smooth operation and increased longevity.

Moving to the Poulan PPB4218, this model takes efficiency up a notch with a larger 18-inch bar and chain, making it ideal for medium to large cutting jobs. The 40cc engine provides increased power, allowing users to tackle tougher jobs with ease. This chainsaw also incorporates an advanced anti-vibration system, which significantly reduces user fatigue during extended use. Its manageable weight ensures that users can operate it with comfort and control. Like the PPB3416, the PPB4218 features an automatic chain oiler and an Easy Start system, enhancing the overall user experience.

The Poulan PPB3416AV adds another layer of innovation with its advanced design and features. This model shares the compact 16-inch bar and 33cc engine with the PPB3416 but includes additional technology that enhances its performance. The AV designation stands for "Anti-Vibration," making the PPB3416AV ideal for users who prioritize comfort during prolonged usage. The improved ergonomic handle design offers a better grip, allowing for increased precision while reducing strain on the user's arms. This model also boasts tool-less chain tensioning, making adjustments quick and convenient.

In summary, the Poulan PPB3416, PPB4218, and PPB3416AV combine user-friendly features with powerful performance, making them effective tools for a variety of cutting tasks. With their innovative technologies and reliable build quality, these chainsaws are excellent choices for anyone looking to maintain their outdoor spaces efficiently. Whether you're a seasoned professional or a DIY enthusiast, Poulan's range of chainsaws provides the capability and convenience you need to get the job done.
Top Page Image Contents