Poulan PPB3416, PPB4218, PPB3416AV Kickback Safety Features, Chain Brake and CKA Angle

Page 5

KICKBACK SAFETY FEATURES

WARNING: The following features are included on your saw to help reduce the hazard of kickback; however, such features will not totally eliminate this danger. As a chain saw user, do not rely only on safety de- vices. You must follow all safety precau- tions, instructions, and maintenance in this manual to help avoid kickback and other forces which can result in serious injury.

SReduced--Kickback Guide Bar, designed with a small radius tip which reduces the size of the kickback danger zone on the bar tip. A Reduced--Kickback Guide Bar has been demonstrated to significantly re- duce the number and seriousness of kick- backs when tested in accordance with safety requirements for gasoline powered

chain saws as set by ANSI B175.1.

Reduced Kickback Symmetrical Guide Bar

Small Radius Tip

Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a contoured depth gauge and guard link which deflect kickback force and allow wood to gradually ride into the cutter. Low-- Kickback Chain has met kickback per- formance requirements when tested on a representative sample of chain saws be- low 3.8 cubic inch displacement specified in ANSI B175.1.

Contoured Depth Gauge

 

Elongated Guard Link

 

Deflects

Low--- Kickback

kickback force

and allows wood

Chain

to gradually ride

 

into cutter

 

Can Obstruct Material

Not a Low--- Kickback Chain

SFront Hand Guard, designed to reduce the chance of your left hand contacting the chain

if your hand slips off the front handlebar.

SPosition of front and rear handlebars, de- signed with distance between handles and “in-line” with each other. The spread and “in-line” position of the hands provided by this design work together to give balance and resistance in controlling the pivot of the saw back toward the operator if kick- back occurs.

CHAIN BRAKE AND CKA ANGLE

SChain Brake, designed to stop the chain in the event of kickback.

WARNING: WE DO NOT REP- RESENT AND YOU SHOULD NOT AS- SUME THAT THE CHAIN BRAKE WILL PROTECT YOU IN THE EVENT OF A KICK- BACK. Kickback is a lightning fast action which throws the bar and rotating chain back and up toward the operator. Kickback can be caused by allowing contact of the bar tip in the danger zone with any hard object. Kickback can also be caused by pinching the saw chain along the top of the guide bar. This action may push the guide bar rapidly back toward the op- erator. Either of these events may cause you to lose control of the saw which could result in serious injury or even death. DO NOT RELY UPON ANY OF THE DEVICES BUILT INTO YOUR SAW. YOU SHOULD USE THE SAW PROPERLY AND CAREFULLY TO AVOID KICKBACK. Reduced--kickback guide bars and low--kickback saw chains reduce the chance and magnitude of kickback and are recommended. Your saw has a low kickback chain and bar as original equipment. Repairs on a chain brake should be made by an autho- rized servicing dealer. Take your unit to the place of purchase if purchased from a servic- ing dealer, or to the nearest authorized master service dealer.

STip contact in some cases may cause a light- ning fast reverse REACTION, kicking guide

bar up and back toward operator.

SPinching the saw chain along the top of the guide bar may push the guide bar rapidly back toward the operator.

SEither of these reactions may cause you to lose control of the saw which could result in serious injury. Do not rely exclusively upon devices built into your saw.

WARNING: Computed kickback angle (CKA) listed on your saw and listed in the CKA table below represents angle of kickback your bar and chain combinations will have when tested in accordance with CSA (Cana- dian Standards Association) and ANSI stan- dards. When purchasing replacement bar and chain, considerations should be given to the lower CKA values. Lower CKA values repre- sent safer angles to the user, higher values in- dicate more angle and higher kick energies. Computed angles represented indicate total energy and angle associated without activation of the chain brake during kickback. Activated angle represents chain stopping time relative to activation angle of chain break and resulting kick angle of saw. In all cases lower CKA val- ues represent a safer operating environment for the user.

The following guide bar and chain combina- tions meet kickback requirements of CSA Standards Z62.1, Z62.3, & ANSI B175.1 when used on saws listed in this manual. Use of bar and chain combinations other than those listed is not recommended and may not meet the CKA requirements per standard.

5

Image 5
Contents Manual de Instrucciones Manuel d’Instructions Tions found in this manual Starting ReminderPlan Ahead Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InChain Brake and CKA Angle Kickback Safety FeaturesChain saws as set by Ansi B175.1 If your hand slips off the front handlebarAttaching the BAR & Chain If not AssemblyChecking the tension Adjusting the tensionChain Tension Operation ON/STOP Switch Throttle TriggerKnow Your Chain SAW ON/STOPCHOKE/FAST Idle Lever Throttle LOCK-OUT Chain BrakePrimer Bulb Before Starting EngineStarting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Right Foot Through Rear HandleInertia activating function control Braking function control Caution The chain brake must beOperating Tips Tree Felling TechniquesNotch CUT and Felling the Tree Felling Large TreesCutting a Fallen Tree Important PointsBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points LimbingService Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelStorage Engine Load Adjustment EngineOther Empty fuel tank and refill withLigations The U.S. Environmental Limited Warranty

PPB3416AV, PPB3416, PPB4218 specifications

The Poulan PPB3416, PPB4218, and PPB3416AV are versatile products designed to meet the needs of various landscaping and yard maintenance tasks. Each model provides users with reliable performance and innovative features that facilitate efficient operation, making them popular choices among homeowners and professionals alike.

The Poulan PPB3416 is known for its lightweight design and ease of use. This model features a 16-inch bar and chain, making it suitable for cutting small to medium-sized branches and shrubs. The powerful 33cc two-cycle engine delivers ample power for clean and precise cuts, ensuring users can accomplish their tasks without hassle. One of the standout features of the PPB3416 is its Easy Start system, which allows for quick and effortless starting, even after extended periods of inactivity. Additionally, the automatic chain oiler keeps the chain properly lubricated for smooth operation and increased longevity.

Moving to the Poulan PPB4218, this model takes efficiency up a notch with a larger 18-inch bar and chain, making it ideal for medium to large cutting jobs. The 40cc engine provides increased power, allowing users to tackle tougher jobs with ease. This chainsaw also incorporates an advanced anti-vibration system, which significantly reduces user fatigue during extended use. Its manageable weight ensures that users can operate it with comfort and control. Like the PPB3416, the PPB4218 features an automatic chain oiler and an Easy Start system, enhancing the overall user experience.

The Poulan PPB3416AV adds another layer of innovation with its advanced design and features. This model shares the compact 16-inch bar and 33cc engine with the PPB3416 but includes additional technology that enhances its performance. The AV designation stands for "Anti-Vibration," making the PPB3416AV ideal for users who prioritize comfort during prolonged usage. The improved ergonomic handle design offers a better grip, allowing for increased precision while reducing strain on the user's arms. This model also boasts tool-less chain tensioning, making adjustments quick and convenient.

In summary, the Poulan PPB3416, PPB4218, and PPB3416AV combine user-friendly features with powerful performance, making them effective tools for a variety of cutting tasks. With their innovative technologies and reliable build quality, these chainsaws are excellent choices for anyone looking to maintain their outdoor spaces efficiently. Whether you're a seasoned professional or a DIY enthusiast, Poulan's range of chainsaws provides the capability and convenience you need to get the job done.