Poulan PR25PH48STB owner manual Service and Adjustments, To Remove Mower See Fig, To Install Mower

Page 20

SERVICE AND ADJUSTMENTS

CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

•Depress brake pedal fully and set parking brake.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key “OFF” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 19)

•Place attachment clutch in “DISENGAGED” position.

•If equipped, turn height adjustment knob to lowest setting.

•Lower mower to its lowest position.

•Disengage belt tension rod from lock bracket.

CAUTION: Rod is spring loaded. Have a tight grip on rod and release slowly.

•Remove retainer spring holding anti-swaybar to chassis bracket and disengage anti-swaybar from bracket.

•Remove four retainer springs from front plate assembly and remove plate.

•Remove retainer springs from suspension arms at deck and disengage arms from deck.

•Raise attachment lift to its highest position.

•Slide mower forward and remove belt from electric clutch pulley.

•Slide mower out from under right side of tractor.

LOCK

BRACKET

BELT TENSION

SUSPENSION

ARMS

ROD

(DISENGAGED

 

POSITION)

 

CHASSIS

 

BRACKET

 

RETAINER

SPRING

 

ANTI-SWAY

USE PLIERS FOR

BAR

 

RETAINER SPRINGS

 

 

SUSPENSION ARMS

 

DOUBLE LOOP

 

RETAINER SPRINGS

 

(Outward pointing

LOOP UP

deck pins)

 

TO INSTALL MOWER

Be sure tractor is on level surface and mower suspension arms are raised with attachment lift control. Engage parking brake.

•Swing anti-sway bar to left side of mower deck.

•Slide mower under tractor with deflector shield to right side of tractor.

IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES.

•If equipped, turn height adjustment knob counterclock- wise until it stops.

•Lower mower linkage with attachment lift control.

•Be sure belt tension rod is in disengaged position.

•Install belt into electric clutch pulley groove.

•Place the suspension arms on outward pointing deck pins. Retain with double loop retainer spring with loops up as shown.

•Install front plate assembly to tractor suspension brack- ets and retain with single loop retainer springs as shown.

•Position front plate assembly between front mower brackets. Raise deck and plate assembly to align holes and insert flanged pins. Secure pins with double loop retainer springs between the plate assembly and mower brackets.

 

ELECTRIC

 

 

FRONT

CLUTCH

 

DOUBLE LOOP

PULLEY

FRONT

RETAINER

MOWER

 

PLATE

SPRING

BRACKET

 

 

ASSEMBLY

 

 

 

 

SINGLE LOOP

RETAINER

SPRING

FLANGED PIN

DEFLECTOR

SHIELD

FIG. 19

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents PR25PH48STB Safety Rules Safe Operation Practices for Ride-On MowersSafety Rules Table of Contents Unassembled Parts Assembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig Assemble Gauge Wheels to Mower Deck See FigInstall Mower and Drive Belt See Figs To Attach Nose Roller See FigCheck Tire Pressure Check Mower LevelnessCheck for Proper Position of ALL Belts Check Brake SystemBattery Reverse Forward Fast OperationKnow Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigPurge Transmission Mowing TipsLubrication Chart Service DatesCustomer Responsibilities General RecommendationsTractor Engine Cleaning MufflerSpark Plugs Engine OIL FilterTo Remove Mower See Fig Service and AdjustmentsTo Install Mower To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Replace Mower Blade Drive Belt See Fig To Adjust Brake See FigTo Replace Mower Drive Belt Front Wheel TOE-IN/CAMBER Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel Alignment Replacing Battery See Fig To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Carburetor To Adjust Throttle Control Cable See FigTo Adjust Choke Control See Fig Storage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionOFF NON-REMOVABLE Removable Connections Connections SchematicTractor Model Number PR25PH48STB Electrical KEY Part Description Chassis and Enclosures Bracket Fender Repair Parts DriveTransaxle Order parts from Steering Assembly 180657 Engine Seat Assembly Decals Wheels & TiresMower Lift Mower Deck Washer, Spacer Mower Vented Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Service Notes Service Notes Parts and Service

PR25PH48STB specifications

The Poulan PR25PH48STB is a versatile and powerful tool designed to tackle various yard maintenance tasks with ease. Ideal for both homeowners and professional landscapers, this string trimmer combines user-friendly features and advanced technology to ensure efficient performance.

Equipped with a robust 25cc 2-stroke engine, the PR25PH48STB delivers ample power for clearing through tough grasses and weeds. This lightweight engine contributes to the overall maneuverability of the trimmer, allowing users to navigate around obstacles without fatigue during extended use. The high-performance engine is not only powerful but also designed to be fuel-efficient, helping users to save on fuel costs while minimizing their environmental impact.

One of the standout features of the Poulan PR25PH48STB is its pivoting head, which allows for easy transitions between trimming and edging tasks. This unique feature facilitates a smooth operation, making it simple to achieve a clean and professional finish around gardens, driveways, and patios. Additionally, the adjustable handle provides comfort and control, enabling users to change their grip position to suit their height and working style.

The dual-line capability of the PR25PH48STB enhances its cutting efficiency. By using two lines simultaneously, the trimmer can cover a larger area and reduce the time required to complete the job. The Easy Reload string head makes it simple to replace the cutting line, minimizing downtime and keeping users focused on the task at hand.

The trimmer also incorporates anti-vibration technology, which significantly reduces fatigue during prolonged use. This makes it an excellent choice for those who need to tackle large areas or complete challenging tasks without experiencing discomfort. Additionally, the lightweight design contributes to the ease of use and overall user experience.

For enhanced convenience, the PR25PH48STB features a straight shaft design, which provides better reach under bushes and around trees, ensuring gardeners can maintain their yards more effectively. This design also reduces the chance of the user having to bend or strain their back while working.

Overall, the Poulan PR25PH48STB stands out as a reliable and efficient trimmer that combines power, versatility, and user-friendly features. With its advanced technologies and robust design, it’s an ideal solution for anyone looking to maintain a pristine outdoor space effortlessly.
Top Page Image Contents