Poulan P3416, P4018WM, P4018AV, P3818AV Limbing and Pruning Important Points, ING Without a Support

Page 13

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand

2nd Cut

1st Cut

1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure footing and balance.

SWatch out for springpoles. Springpoles are small size limbs which can catch the saw chain and whip toward you or pull you off bal- ance. Use extreme caution when cutting

small size limbs or slender material.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only then can limbing be done safely and prop-

erly.

SLeave the larger limbs underneath the felled

tree to support the tree as you work.

SStart at the base of the felled tree and work toward the top, cutting branches and limbs.

Remove small limbs with one cut.

SKeep the tree between you and the chain. Cut from the side of the tree opposite the branch you are cutting.

S Remove larger, supporting branches with the cutting techniques described in BUCK-

ING WITHOUT A SUPPORT.

SAlways use an overcut to cut small and free- ly hanging limbs. Undercutting could cause limbs to fall and pinch the saw.

PRUNING

WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a professional to do the job.

SMake your first cut 1/3 of the way through the bottom of the limb.

SNext make a 2nd cut all the way through the limb. Then cut a third overcut leaving a 1 to 2 inch (2.5 to 5 cm) collar from the truck of the tree.

Second cut

Third cut

Collar

First cut

Pruning technique

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 11/12/04 530165293-01Plan Ahead Identification of SymbolsMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackReduce the Chance of Kickback Kickback Safety FeaturesMaintain Control WE do not REP Chain Brake and CKA AngleResent and YOU should not AS Sume That the Chain Brake willAttaching the BAR & Chain If not AssemblyAdjusting Screw Adjusting the tensionChain Tension Checking the tensionOperation BAR and Chain Lubrication Before Starting Engine Fueling EngineImportant Points to Remember Difficult Starting or starting a flooded engine Starting a Warm EngineBraking function control Caution The chain brake must be Inertia activating function controlTree Felling Techniques Operating TipsFelling Large Trees Notch CUT and Felling the TreeCutting a Fallen Tree Bucking Using a LOG or Support StandImportant Points Types of Cutting Used for BuckingLimbing Limbing and Pruning Important PointsPruning ING Without a SupportService Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelStorage Engine Load Adjustment EngineOther Empty fuel tank and refill with

P3314WSA, P3416, P3818AV, P4018AV, P4018WM specifications

Poulan Pro offers a wide array of reliable chainsaws designed to meet various user needs, and among their popular models are the P3314WSA, P3416, P4018WM, P3818AV, and P4018AV. Each of these models boasts unique features and technologies that cater to both professionals and hobbyists alike.

The Poulan P3314WSA is a lightweight chainsaw that weighs just 8.1 pounds, making it ideal for users who require portability without compromising power. It features a 33cc 2-cycle engine, delivering exceptional performance for cutting small to medium-sized trees and limbs. The 14-inch bar enables precise cuts, while the automatic oiler ensures continuous lubrication, prolonging the life of the chain.

Next up, the Poulan P3416 is designed for optimal performance with its 34cc engine and a longer 16-inch bar. This model excels at cutting larger branches and performing more demanding tasks. It features a convenient tool-less chain tensioning system, allowing for quick adjustments to ensure optimal cutting performance. Additionally, the anti-vibration technology enhances user comfort, reducing fatigue during extended use.

The P4018WM is a powerful chainsaw with a robust 40cc engine paired with an 18-inch bar, making it suitable for heavy-duty tasks like felling trees or tackling larger firewood jobs. The model includes a patented Easy Start technology, reducing the amount of pull force needed to start the engine. Furthermore, the adjustable chain oiler system enables users to customize oil flow based on cutting conditions.

The Poulan P3818AV, another standout model, is designed for versatility and ease of use. With an 38cc engine and an 18-inch bar, it provides a good balance of power and maneuverability. The advanced anti-vibration system significantly reduces user fatigue, making it perfect for long jobs. The chainsaw also includes an easy-access air filter that allows for simple maintenance while ensuring optimal engine performance.

Lastly, the P4018AV shares similar characteristics with the P4018WM but focuses on user convenience with its lightweight design and enhanced comfort features. It comes with an effective vibration dampening system and an easy-to-adjust chain tensioner, making it a practical choice for users looking to engage in prolonged cutting tasks without strain.

Overall, the chainsaws offered by Poulan Pro stand out not only for their powerful engines and innovative technologies but also for their user-friendly features, making them suitable for both casual users and professionals.
Top Page Image Contents