Poulan 952802061, 952802062, 545186810 instruction manual

Page 21

PRO authorized repair center as soon as a problem exists. Warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have any questions regarding your warranty rights and responsi- bilities, you should contact your nearest autho- rized service center, call Poulan PRO at 1--800--554--6723, or send e-mail corre- spondence to emission.warranty@HCOP-- emission.com. WARRANTY COMMENCE- MENT DATE: The warranty period begins on the date the small off--road engine is pur- chased. LENGTH OF COVERAGE: This warranty shall be for a period of two years from the initial date of purchase, or until the end of the product warranty (whichever is longer).

WHAT IS COVERED: REPAIR OR RE- PLACEMENT OF PARTS. Repair or re- placement of any warranted part will be per- formed at no charge to the owner at an approved Poulan PRO servicing center. If you have any questions regarding your war- ranty rights and responsibilities, you should contact your nearest authorized service

center, call Poulan PRO at 1--800--554--6723, or send e-mail corre- spondence to emission.warranty@HCOP-- emission.com. WARRANTY PERIOD: Any warranted part which is not scheduled for re- placement as required maintenance, or which is scheduled only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for 2 years. Any warranted part which is scheduled for replacement as re- quired maintenance shall be warranted for the period of time up to the first scheduled replace- ment point for that part. DIAGNOSIS: The owner shall not be charged for diagnostic labor which leads to the determination that a war- ranted part is defective if the diagnostic work is performed at an approved Poulan PRO servic- ing center.

CONSEQUENTIAL DAMAGES: Poulan PRO may be liable for damages to other en- gine components caused by the failure of a warranted part still under warranty. WHAT IS NOT COVERED: All failures caused by abuse, neglect, or improper maintenance are not covered. ADD-ON OR MODIFIED PARTS: The use of add--on or modified parts can be grounds for disallowing a warranty claim. Poulan PRO is not liable to cover fail- ures of warranted parts caused by the use of add--on or modified parts. HOW TO FILE A CLAIM: If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized service center, call Poulan PRO at 1--800--554--6723, or send e-mail corre- spondence to emission.warranty@HCOP-- emission.com. WHERE TO GET WARRAN- TY SERVICE: Warranty services or repairs shall be provided at all Poulan PRO service centers. Call: 1--800--554--6723 or send e-mail correspondence to emission.warranty@HCOP--emission.com.MAINTENANCE,

REPLACEMENT AND REPAIR OF EMIS- SION RELATED PARTS: Any Poulan PRO

approved replacement part used in the per- formance of any warranty maintenance or repair on emission related parts will be pro- vided without charge to the owner if the part is under warranty. EMISSION CONTROL WARRANTY PARTS LIST: Carburetor, air fil- ter (covered up to maintenance schedule), igni- tion system: spark plug (covered up to mainte- nance schedule), ignition module, muffler including catalyst (if equipped), fuel tank. MAINTENANCE STATEMENT: The owner is responsible for the performance of all re- quired maintenance as defined in the in- struction manual.

The information on the product label indicates which standard your engine is certified. Example: (Year) EPA and/or CALIFORNIA.

This engine is certified to be emissions compliant for the following use:

Moderate (50 hours)

Intermediate (125 hours)

Extended (300 hours)

21

Image 21
Contents Manual de Instrucciones Manuel d’Instructions Starting Reminder Plan AheadTions found in this manual Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InChain Brake and CKA Angle Kickback Safety FeaturesChain saws as set by Ansi B175.1 If your hand slips off the front handlebarAttaching the BAR & Chain If not AssemblyAdjusting the tension Chain TensionChecking the tension ON/STOP Switch Throttle Trigger OperationKnow Your Chain SAW CHOKE/FAST Idle Lever Throttle LOCK-OUTPrimer Bulb Chain BrakeStarting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Right Foot Through Rear HandleInertia activating function control Braking function control Caution The chain brake must beOperating Tips Tree Felling TechniquesNotch CUT and Felling the Tree Felling Large TreesCutting a Fallen Tree Important PointsBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points LimbingService Clean AIR Filter Inspect and Clean Unit and DecalsCheck Guide BAR Check Fuel Mixture LevelChain Adjustment Cleaning the Spark ARREST- ING ScreenReplace Spark Plug Chain SharpeningIdle Speed-T Carburetor AdjustmentCooling System RightSeasonal Storage StorageFuel System EngineEmpty fuel tank and refill with Load Adjustment EngineLigations The U.S. Environmental Poulan PRO

545186810, 952802062, 952802061 specifications

Poulan is well-known for producing high-quality outdoor power equipment, and its models 545186810, 952802061, and 952802062 exemplify the brand's commitment to innovation and reliability. These products are designed to make outdoor tasks more manageable, whether for homeowners or professionals.

The Poulan 545186810 is a robust chainsaw that embodies power and efficiency. Its key features include a powerful 18-inch bar and chain, which allows for smooth cutting through various types of wood, from light pruning to heavier tree cutting. The chainsaw is equipped with an automatic oiling system, ensuring that the chain remains lubricated during use, thus extending its life and performance. Additionally, it incorporates a primer bulb for easy starting, allowing users to quickly get to work without the hassle of complicated starting procedures. Ergonomically designed handles offer comfort and grip while working for extended periods.

Next, the Poulan 952802061 is a versatile leaf blower that stands out for its lightweight design and high performance. It features a powerful two-cycle engine that delivers excellent airflow and speed, making leaf and debris cleanup quick and efficient. The blower includes multiple speed settings, allowing users to customize airflow according to the specific needs of the task, whether it’s clearing a small patio or tackling a large yard. A comfortable, padded handle enhances user experience, reducing fatigue during extended use.

Lastly, the Poulan 952802062 is a hedge trimmer that combines precision cutting with user-friendly features. It boasts a dual-action blade design, which significantly reduces vibration while cutting, making it easier to maintain control and accuracy in your cuts. The 24-inch cutting length is ideal for managing both small bushes and large hedges, and its lightweight construction makes it easy to maneuver. This model also incorporates a safety switch to prevent accidental starts, ensuring user safety during operation.

In summary, the Poulan 545186810, 952802061, and 952802062 highlight Poulan's dedication to delivering powerful, efficient, and user-friendly outdoor equipment. Their innovative technologies and characteristics cater to various outdoor tasks, ensuring that both casual users and professionals can maintain their landscapes with ease and confidence. Whether cutting, blowing, or trimming, Poulan provides the tools needed for a job well done.