Poulan 545186810, 952802061 Carburetor Adjustment, Idle Speed-T, Cooling System, Right, Wrong

Page 17

All Cutters

Remove Damage

Same Length

 

 

Top Plate

 

Side Plate

SFile chain to meet the specifications as shown.

80˚60˚

30˚

Hook Angle

 

0.025 inch

 

(0.65 mm)

 

Rounded

Right

Corner

 

Too Much Hook Angle

Squared Off

 

Corner

Wrong

WARNING: Maintain the proper hook angle according to the manufacturer’s specifi- cations for the chain you are using. Improper hook angle will increase the chance of kick- back which can result in serious injury.

4. Check and lower depth gauges.

Depth Gauge Tool

File

Depth Gauge

SPlace gauge tool on cutter.

SIf the depth gauge is higher than the depth gauge tool, file it level to the top of

the depth gauge tool.

SMaintain rounded front corner of depth gauge with a flat file.

NOTE: The very top of the depth gauge should be flat with the front

half rounded off with a flat file.

If you require further assistance or are unsure about performing this procedure, contact your authorized service dealer or call our customer assistance help line at 1--800--554--6723.

CARBURETOR ADJUSTMENT

WARNING: The chain will be moving during most of this procedure. Wear your protective equipment and observe all safety precautions. The chain must not move at idle speed.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

SChain moves at idle. See IDLE SPEED--T

adjusting procedure.

SSaw will not idle. See IDLE SPEED--T ad- justing procedure.

Idle Speed-T

Allow engine to idle. If the chain moves, idle is too fast. If the engine stalls, idle is too slow. Ad- just speed until engine runs without chain movement (idle too fast) or stalling (idle too slow). The idle speed screw is located in the area above the primer bulb and is labeled T.

STurn idle screw (T) clockwise to increase

engine speed.

S Turn idle screw (T) counterclockwise to decrease engine speed.

If you require further assistance or are unsure about performing this procedure, contact your authorized service dealer or call our customer assistance help line at 1--800--554--6723.

COOLING SYSTEM

To keep the working temperature as low as possible the machine is equipped with a cooling system.

The cooling system consists of:

SAir intake on the starter S Air guide plate

S Fins on the flywheel

S Cooling fins on the cylinder

S Cylinder cover (directs cold air over the cylinder)

Clean the cooling system with a brush after each use, more often in demanding condi- tions. A dirty or blocked cooling system re- sults in the machine overheating which causes damage to the piston and cylinder.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Manual de Instrucciones Manuel d’Instructions Tions found in this manual Starting ReminderPlan Ahead Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InChain Brake and CKA Angle Kickback Safety FeaturesChain saws as set by Ansi B175.1 If your hand slips off the front handlebarAttaching the BAR & Chain If not AssemblyChecking the tension Adjusting the tensionChain Tension Know Your Chain SAW ON/STOP Switch Throttle TriggerOperation CHOKE/FAST Idle Lever Throttle LOCK-OUTPrimer Bulb Chain BrakeStarting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Right Foot Through Rear HandleInertia activating function control Braking function control Caution The chain brake must beOperating Tips Tree Felling TechniquesNotch CUT and Felling the Tree Felling Large TreesCutting a Fallen Tree Important PointsBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points LimbingService Clean AIR Filter Inspect and Clean Unit and DecalsCheck Guide BAR Check Fuel Mixture LevelChain Adjustment Cleaning the Spark ARREST- ING ScreenReplace Spark Plug Chain SharpeningIdle Speed-T Carburetor AdjustmentCooling System RightSeasonal Storage StorageFuel System EngineEmpty fuel tank and refill with Load Adjustment EngineLigations The U.S. Environmental Poulan PRO

545186810, 952802062, 952802061 specifications

Poulan is well-known for producing high-quality outdoor power equipment, and its models 545186810, 952802061, and 952802062 exemplify the brand's commitment to innovation and reliability. These products are designed to make outdoor tasks more manageable, whether for homeowners or professionals.

The Poulan 545186810 is a robust chainsaw that embodies power and efficiency. Its key features include a powerful 18-inch bar and chain, which allows for smooth cutting through various types of wood, from light pruning to heavier tree cutting. The chainsaw is equipped with an automatic oiling system, ensuring that the chain remains lubricated during use, thus extending its life and performance. Additionally, it incorporates a primer bulb for easy starting, allowing users to quickly get to work without the hassle of complicated starting procedures. Ergonomically designed handles offer comfort and grip while working for extended periods.

Next, the Poulan 952802061 is a versatile leaf blower that stands out for its lightweight design and high performance. It features a powerful two-cycle engine that delivers excellent airflow and speed, making leaf and debris cleanup quick and efficient. The blower includes multiple speed settings, allowing users to customize airflow according to the specific needs of the task, whether it’s clearing a small patio or tackling a large yard. A comfortable, padded handle enhances user experience, reducing fatigue during extended use.

Lastly, the Poulan 952802062 is a hedge trimmer that combines precision cutting with user-friendly features. It boasts a dual-action blade design, which significantly reduces vibration while cutting, making it easier to maintain control and accuracy in your cuts. The 24-inch cutting length is ideal for managing both small bushes and large hedges, and its lightweight construction makes it easy to maneuver. This model also incorporates a safety switch to prevent accidental starts, ensuring user safety during operation.

In summary, the Poulan 545186810, 952802061, and 952802062 highlight Poulan's dedication to delivering powerful, efficient, and user-friendly outdoor equipment. Their innovative technologies and characteristics cater to various outdoor tasks, ensuring that both casual users and professionals can maintain their landscapes with ease and confidence. Whether cutting, blowing, or trimming, Poulan provides the tools needed for a job well done.
Top Page Image Contents