Poulan 545186810, 952802061 Operation, Know Your Chain SAW, ON/STOP Switch Throttle Trigger

Page 8

3.Using bar tool, roll chain around guide bar to ensure all links are in bar groove.

4.Lift up tip of guide bar to check for sag. Release tip of guide bar, then turn ad- justing screw 1/4 turn clockwise. Repeat until sag does not exist.

Adjusting Screw -- 1/4 Turn

5.While lifting tip of guide bar, tighten bar nuts securely with the bar tool.

Bar Nuts

6.Use the screwdriver end of the bar tool to move chain around guide bar.

7.If chain does not rotate, it is too tight. Slightly loosen bar nuts and loosen chain by turning the adjusting screw 1/4 turn counterclockwise. Retighten bar nuts.

8.If chain is too loose, it will sag below the guide bar. DO NOT operate the saw if the chain is loose.

NOTE: The chain is tensioned correctly when the weight of the chain does not cause it to sag below the guide bar (with the chain saw sitting in an upright position), but the chain still moves freely around the guide bar.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury to the op- erator and/or damage the chain making it un- usable. If the chain jumps off the guide bar, in- spect each drive link for damage. Damaged chain must be repaired or replaced.

OPERATION

KNOW YOUR CHAIN SAW

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

Chain

 

Front Hand Guard

Front Handle

 

Adjustment Tool

 

 

 

 

Starter Rope

 

(Bar Tool)

 

 

 

 

 

 

 

 

 

 

 

 

 

ON/STOP

Choke/

 

 

 

 

Switch

 

Chain

Muffler

 

Fast Idle

 

 

Lever

Bar

Bar Oil Fill Cap

 

 

 

 

Sprocket

 

 

 

 

 

Hole

Starter Housing

Fuel Mix Fill Cap

Primer Bulb

 

 

Cylinder Cover

 

 

 

 

Throttle

 

Chain

 

Chain

Lockout

 

Brake

 

Direction

Rear

 

 

 

 

of Travel

 

Adjusting Screw

 

 

Handle

 

 

 

 

 

 

 

 

 

 

Chain

Guide Bar

Throttle

 

 

 

Clutch Cover

Catcher

 

 

Trigger

Bar Nuts

 

 

 

 

ON/STOP SWITCH

THROTTLE TRIGGER

 

The ON/STOP SWITCH is used to stop the

The THROTTLE TRIGGER controls engine

engine.

 

speed.

 

 

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Manual de Instrucciones Manuel d’Instructions Tions found in this manual Starting ReminderPlan Ahead Operate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackReduce the Chance of Kickback Maintain ControlAvoid Pinch-Kickback Avoid Pull-InKickback Safety Features Chain Brake and CKA AngleChain saws as set by Ansi B175.1 If your hand slips off the front handlebarAssembly Attaching the BAR & Chain If notChecking the tension Adjusting the tensionChain Tension Know Your Chain SAW ON/STOP Switch Throttle TriggerOperation Throttle LOCK-OUT CHOKE/FAST Idle LeverPrimer Bulb Chain BrakeImportant Points to Remember Starting a Warm EngineDifficult Starting or starting a flooded engine Right Foot Through Rear HandleBraking function control Caution The chain brake must be Inertia activating function controlOperating Tips Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeCutting a Fallen Tree Important PointsBucking Using a LOG or Support Stand Bucking Without a SupportLimbing and Pruning Important Points LimbingService Inspect and Clean Unit and Decals Clean AIR FilterCheck Guide BAR Check Fuel Mixture LevelCleaning the Spark ARREST- ING Screen Chain AdjustmentReplace Spark Plug Chain SharpeningCarburetor Adjustment Idle Speed-TCooling System RightStorage Seasonal StorageFuel System EngineLoad Adjustment Engine Empty fuel tank and refill withPoulan PRO Ligations The U.S. Environmental

545186810, 952802062, 952802061 specifications

Poulan is well-known for producing high-quality outdoor power equipment, and its models 545186810, 952802061, and 952802062 exemplify the brand's commitment to innovation and reliability. These products are designed to make outdoor tasks more manageable, whether for homeowners or professionals.

The Poulan 545186810 is a robust chainsaw that embodies power and efficiency. Its key features include a powerful 18-inch bar and chain, which allows for smooth cutting through various types of wood, from light pruning to heavier tree cutting. The chainsaw is equipped with an automatic oiling system, ensuring that the chain remains lubricated during use, thus extending its life and performance. Additionally, it incorporates a primer bulb for easy starting, allowing users to quickly get to work without the hassle of complicated starting procedures. Ergonomically designed handles offer comfort and grip while working for extended periods.

Next, the Poulan 952802061 is a versatile leaf blower that stands out for its lightweight design and high performance. It features a powerful two-cycle engine that delivers excellent airflow and speed, making leaf and debris cleanup quick and efficient. The blower includes multiple speed settings, allowing users to customize airflow according to the specific needs of the task, whether it’s clearing a small patio or tackling a large yard. A comfortable, padded handle enhances user experience, reducing fatigue during extended use.

Lastly, the Poulan 952802062 is a hedge trimmer that combines precision cutting with user-friendly features. It boasts a dual-action blade design, which significantly reduces vibration while cutting, making it easier to maintain control and accuracy in your cuts. The 24-inch cutting length is ideal for managing both small bushes and large hedges, and its lightweight construction makes it easy to maneuver. This model also incorporates a safety switch to prevent accidental starts, ensuring user safety during operation.

In summary, the Poulan 545186810, 952802061, and 952802062 highlight Poulan's dedication to delivering powerful, efficient, and user-friendly outdoor equipment. Their innovative technologies and characteristics cater to various outdoor tasks, ensuring that both casual users and professionals can maintain their landscapes with ease and confidence. Whether cutting, blowing, or trimming, Poulan provides the tools needed for a job well done.
Top Page Image Contents