Poulan BH 2160 Tree Felling Techniques Felling Large Trees, Notch CUT and Felling the Tree

Page 11
Opening of felling cut

SAllow the chain to cut for you. Exert only light downward pressure. If you

force the cut, damage to the bar, chain, or engine can result.

SRelease the throttle trigger as soon as the cut is completed, allowing the en- gine to idle. If you run the saw at full

throttle without a cutting load, unnec- essary wear can occur to the chain, bar, and engine.

STo avoid losing control when cut is complete, do not put pressure on saw

at end of cut.

S Stop the engine before setting the saw down after cutting.

TREE FELLING TECHNIQUES

WARNING: Check for broken or dead branches which can fall while cutting causing serious injury. Do not cut near build- ings or electrical wires if you do not know the direction of tree fall, nor cut at night since you will not be ale to see well, nor during bad weather such as rain, snow, or strong winds,

FELLING LARGE TREES

(6 inches in diameter or larger)

The notch method is used to fell large trees. A notch is cut on the side of the tree in the de- sired direction of fall. After a felling cut is made on the opposite side of tree, the tree will tend to fall into the notch.

NOTE: If the tree has large buttress roots, remove them before making the notch. If us- ing saw to remove buttress roots, keep saw chain from contacting ground to prevent dull- ing of the chain.

NOTCH CUT AND FELLING THE TREE

SMake notch cut by cutting the top of the notch first. Cut through 1/3 of the diameter of the tree. Next complete the notch by cut- ting the bottom of the notch. See illustra- tion. Once the notch is cut remove the notch of wood from the tree.

Final (felling) cut here. 2 in- ches above center of notch.

etc. If the tree makes contact with any utility line, the utility company should be notified immediately.

SCarefully plan your sawing operation in ad-

vance.

SClear the work area. You need a clear area all around the tree so you can have secure

footing.

SThe chain saw operator should keep on the uphill side of the terrain as the tree is

likely to roll or slide downhill after it is felled.

SStudy the natural conditions that can cause

First cut

Notch

Second cut

Hinge

the tree to fall in a particular direction. Natural conditions that can cause a tree to fall in a particular direction include:

SThe wind direction and speed.

S The lean of the tree. The lean of a tree might not be apparent due to uneven or sloping terrain. Use a plumb or level to de- termine the direction of tree lean.

SWeight and branches on one side. S Surrounding trees and obstacles.

Look for decay and rot. If the trunk is rotted, it can snap and fall toward the operator. Check for broken or dead branches which can fall on you while cutting.

Make sure there is enough room for the tree to fall. Maintain a distance of 2-1/2tree lengths from the nearest person or other objects. En- gine noise can drown out a warning call.

Remove dirt, stones, loose bark, nails, sta- ples, and wire from the tree where cuts are to be made.

Plan a clear retreat path to the rear and diag- onal to the line of fall.

Plan a clear retreat path

Direction of Fall

45_

SAfter removing the wood from the notch, make the felling cut on the opposite side of the notch. This is done by making a cut about two inches higher than the center of the notch. This will leave enough uncut wood between the felling cut and the notch to form a hinge. This hinge will help pre- vent the tree from falling in the wrong direc- tion.

Hinge holds tree on stump and helps control fall

Closing of notch

NOTE: Before felling cut is complete, use wedges to open the cut if necessary to control the direction of fall. To avoid kickback and chain damage, use wood or plastic wedges, but never steel or iron wedges.

SBe alert to signs that the tree is ready to fall: cracking sounds, widening of the fell- ing cut, or movement in the upper branches.

11

Image 11
Contents 22/05 English Español FrançaisElectrolux Home Products, Inc Plan Ahead Identification of SymbolsSafety Rules Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionMaintain Control Kickback Safety FeaturesReduce the Chance of Kickback BH2160 952044370 Chain Brake and CKA AngleFront Hand Guard, designed to reduce Back toward the operatorChain Brake Nuts AssemblyInside view Chain Brake Adjustment located on Chain Brake Attaching the BAR & Chain If notChain Tension Adjusting the tensionChecking the tension Throttle LOCK-OUT ON/STOP SwitchKnow Your Chain SAW Throttle TriggerImportant Points to Remember StartingFueling Engine BAR and Chain LubricationImportant Points Cutting MethodsStarting a Warm Engine Footing Tree Felling Techniques Felling Large TreesNotch CUT and Felling the Tree Inches in diameter or largerBucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingPruning ServiceLimbing and Pruning Important Points LimbingInspect Muffler and Spark Arresting Screen Cleaning the Spark ARREST- ING ScreenCarburetor Adjustment BAR MaintenanceNeed ASSISTANCE? Empty fuel tank and refill with Limited WarrantyLoad Adjustment Engine Electrolux Home PRODUCTS, INC Ligations The U. S. EnvironmentalIntermediate 125 hours Extended 300 hours

BH 2160 specifications

The Poulan BH 2160 is a robust and reliable rear-tine tiller designed for both novice gardeners and seasoned horticulturists. With its powerful performance and user-friendly design, the BH 2160 has garnered a positive reputation among outdoor enthusiasts who require an efficient solution for cultivating soil.

At the heart of the Poulan BH 2160 is its potent 208cc four-stroke engine, which delivers ample power to tackle various soil types. The engine is designed for easy starting, ensuring that users can quickly get to work without the frustration of dealing with difficult pull starts. The tiller features a shift-on-the-go transmission with forward and reverse gears, allowing for enhanced maneuverability in tight spaces and making it easier to navigate around flower beds and garden plots.

One of the standout features of the BH 2160 is its robust tilling width. With the capability to till areas up to 16 inches wide, it allows users to cover more ground efficiently in less time. The heavy-duty steel tines dig deep into the soil, churning up stubborn dirt and turning hard ground into ready-to-plant soil. These tines are designed for durability and longevity, ensuring that they can withstand rigorous use over multiple seasons.

Ergonomics play a vital role in the design of the BH 2160, with an adjustable handle that can be tailored to different user heights. This feature promotes comfort during operation, reducing fatigue and enhancing control. The tiller also boasts a lightweight design, making it easier to manage while still providing the sturdy construction needed for tough tilling tasks.

In terms of safety, the Poulan BH 2160 comes equipped with user-friendly controls that are strategically located for easy access, allowing for quick adjustments while in operation. The tiller also features effective safety mechanisms, preventing accidental starts and ensuring that users can work with confidence.

In conclusion, the Poulan BH 2160 is an exceptional rear-tine tiller that expertly combines power, versatility, and ease of use. It is a worthy investment for anyone looking to cultivate their garden with efficiency and reliability. Whether preparing a small backyard garden or tilling larger plots, the BH 2160 provides the necessary power and features to get the job done effectively.