Reduce the Chance of Kickback, Maintain Control

Avoid Obstructions

Clear The Working Area

REDUCE THE CHANCE OF KICKBACK

S Recognize that kickback can happen. With a basic understanding of kickback, you can reduce the element of surprise which contributes to accidents.

SNever let the moving chain contact any ob- ject at the tip of the guide bar.

SKeep the working area free from obstruc- tions such as other trees, branches, rocks, fences, stumps, etc. Eliminate or avoid

any obstruction that your saw chain could hit while you are cutting. When cutting a branch, do not let the guide bar contact branch or other objects around it.

SKeep your saw chain sharp and properly tensioned. A loose or dull chain can in- crease the chance of kickback occurring. Follow manufacturer’s chain sharpening and maintenance instructions. Check ten- sion at regular intervals with the engine

stopped, never with the engine running. Make sure the chain brake nuts are se- curely tightened after tensioning the chain.

SBegin and continue cutting at full speed. If the chain is moving at a slower speed,

there is greater chance of kickback occur- ring.

SCut one log at a time.

SUse extreme caution when re-entering a

previous cut.

SDo not attempt cuts starting with the tip of the bar (plunge cuts).

SWatch for shifting logs or other forces that could close a cut and pinch or fall into

chain.

SUse the Reduced--Kickback Guide Bar and Low--Kickback Chain specified for your saw.

MAINTAIN CONTROL

Stand to the left of the saw

Thumb on underside of handlebar

Never reverse hand positions

Elbow locked

Thumb on underside of handlebar

SKeep a good, firm grip on the saw with both hands when the engine is running and don’t let go. A firm grip will help you reduce kick- back and maintain control of the saw. Keep the fingers of your left hand encircling and your left thumb under the front handlebar. Keep your right hand completely around the rear handle whether your are right handed or left handed. Keep your left arm straight with

the elbow locked.

SPosition your left hand on the front handle- bar so it is in a straight line with your right hand on the rear handle when making bucking cuts. Never reverse right and left

hand positions for any type of cutting.

SStand with your weight evenly balanced on both feet.

SStand slightly to the left side of the saw to

keep your body from being in a direct line with the cutting chain.

SDo not overreach. You could be drawn or thrown off balance and lose control of the

saw.

SDo not cut above shoulder height. It is diffi- cult to maintain control of saw above shoulder height.

KICKBACK SAFETY FEATURES

WARNING: The following features are included on your saw to help reduce the hazard of kickback; however, such features will not totally eliminate this danger. As a chain saw user, do not rely only on safety de- vices. You must follow all safety precau- tions, instructions, and maintenance in this manual to help avoid kickback and other forces which can result in serious injury.

SReduced--Kickback Guide Bar, designed with a small radius tip which reduces the size of the kickback danger zone on the bar tip. A Reduced--Kickback Guide Bar has been demonstrated to significantly re- duce the number and seriousness of kick- backs when tested in accordance with safety requirements for gasoline powered chain saws as set by ANSI B175.1.

Reduced Kickback Symmetrical Guide Bar

Small Radius Tip

BH 2160 specifications

The Poulan BH 2160 is a robust and reliable rear-tine tiller designed for both novice gardeners and seasoned horticulturists. With its powerful performance and user-friendly design, the BH 2160 has garnered a positive reputation among outdoor enthusiasts who require an efficient solution for cultivating soil.

At the heart of the Poulan BH 2160 is its potent 208cc four-stroke engine, which delivers ample power to tackle various soil types. The engine is designed for easy starting, ensuring that users can quickly get to work without the frustration of dealing with difficult pull starts. The tiller features a shift-on-the-go transmission with forward and reverse gears, allowing for enhanced maneuverability in tight spaces and making it easier to navigate around flower beds and garden plots.

One of the standout features of the BH 2160 is its robust tilling width. With the capability to till areas up to 16 inches wide, it allows users to cover more ground efficiently in less time. The heavy-duty steel tines dig deep into the soil, churning up stubborn dirt and turning hard ground into ready-to-plant soil. These tines are designed for durability and longevity, ensuring that they can withstand rigorous use over multiple seasons.

Ergonomics play a vital role in the design of the BH 2160, with an adjustable handle that can be tailored to different user heights. This feature promotes comfort during operation, reducing fatigue and enhancing control. The tiller also boasts a lightweight design, making it easier to manage while still providing the sturdy construction needed for tough tilling tasks.

In terms of safety, the Poulan BH 2160 comes equipped with user-friendly controls that are strategically located for easy access, allowing for quick adjustments while in operation. The tiller also features effective safety mechanisms, preventing accidental starts and ensuring that users can work with confidence.

In conclusion, the Poulan BH 2160 is an exceptional rear-tine tiller that expertly combines power, versatility, and ease of use. It is a worthy investment for anyone looking to cultivate their garden with efficiency and reliability. Whether preparing a small backyard garden or tilling larger plots, the BH 2160 provides the necessary power and features to get the job done effectively.