Poulan 966513901 Bucking Without a Support, Bucking Using a LOG or Support Stand, Limbing

Page 13

Overcutting

Undercutting

Undercutting involves cutting on the under- side of the log with top of saw against the log. When undercutting use light upward pres- sure. Hold saw firmly and maintain control. The saw will tend to push back toward you.

WARNING: Never turn saw upside down to undercut. The saw cannot be con- trolled in this position.

Always make your first cut on the compres- sion side of the log. The compression side of the log is where the pressure of the log’s weight is concentrated.

First cut on compression side of log

1st Cut

2nd Cut

Using a support stand 2nd Cut

1st Cut

1st Cut

2nd Cut

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A SUPPORT

SOvercut through 1/3 of the diameter of the

log.

SRoll the log over and finish with a second overcut.

SWatch for logs with a compression side to prevent the saw from pinching. See il- lustrations for cutting logs with a compres- sion side.

BUCKING USING A LOG OR SUPPORT STAND

SRemember your first cut is always on the compression side of the log.

(Refer to the following illustrations for your

first and second cut)

S Your first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

Using a log for support 2nd Cut

1st Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure footing and balance.

SWatch out for springpoles. Springpoles are small size limbs which can catch the saw chain and whip toward you or pull you off bal- ance. Use extreme caution when cutting small size limbs or slender material.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only

then can limbing be done safely and prop- erly.

SLeave the larger limbs underneath the felled

tree to support the tree as you work.

SStart at the base of the felled tree and work toward the top, cutting branches and limbs. Remove small limbs with one cut.

SKeep the tree between you and the chain. Cut from the side of the tree opposite the branch you are cutting.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Manual de Instrucciones Manuel d’Instructions Always use two hands when operating the chain saw Using the chain sawStarting Reminder Plan AheadMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackReduce the Chance of Kickback Kickback Safety FeaturesMaintain Control Avoid Pinch-KickbackChain saws as set by Ansi B175.1 Chain Brake and CKA AngleFront Hand Guard, designed to reduce Attaching the BAR & Chain If not AssemblyAdjusting Screw Adjusting the tensionCutters Operation Chain Tension Chain BrakeBefore Starting Engine Fueling Engine Fuel RequirementsStarting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Right Foot Through Rear HandleInertia activating function control Braking function control Caution The chain brake must beOperating Tips Tree Felling TechniquesNotch CUT and Felling the Tree Felling Large TreesCutting a Fallen Tree Important PointsBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points LimbingService Clean AIR Filter Inspect and Clean Unit and DecalsCheck Guide BAR Check Fuel Mixture LevelChain Adjustment Cleaning the Spark ARREST- ING ScreenReplace Spark Plug Chain SharpeningStorage Carburetor AdjustmentIdle Speed-T Cooling SystemFuel System Load Adjustment EngineEngine OtherPoulan PRO Charlotte, NC Canada, contactLigations The U.S. Environmental

966513901 specifications

The Poulan 966513901 is a powerful and versatile chainsaw designed for both professional landscapers and enthusiastic DIYers. Renowned for its durability and efficiency, this model is engineered to tackle a variety of cutting tasks, from felling trees to trimming branches and cutting firewood.

One of the standout features of the Poulan 966513901 is its robust engine. Powered by a high-performance gas engine, this chainsaw delivers impressive horsepower, enabling it to cut through tough materials with ease. The engine is also designed to provide efficient fuel consumption, which translates to longer operating times and reduced refueling intervals, making it ideal for extensive jobs.

The chainsaw features a 18-inch guide bar, optimizing cutting length while maintaining a manageable weight. This balance enhances maneuverability, allowing users to handle the chainsaw comfortably for extended periods. Additionally, the chainsaw comes equipped with a chain brake, a crucial safety feature that helps protect the user in the event of kickback. This brake engages automatically when the chainsaw is dropped or tilted unexpectedly, providing an additional layer of protection during operation.

Another noteworthy characteristic of the Poulan 966513901 is its Easy Start technology. This innovation simplifies the starting process, allowing users to start the engine with minimal effort. This feature is particularly beneficial for those who may struggle with traditional pull-start mechanisms, making it accessible for users of varying experience levels.

The chainsaw also includes an adjustable automatic oiler, ensuring that the chain remains adequately lubricated during operation. This not only extends the lifespan of the chain but also enhances cutting efficiency. The oil reservoir is easy to access, enabling quick refills without interrupting work flow.

In terms of weight, the Poulan 966513901 strikes a balance between power and portability. It is lightweight enough for easy handling, yet robust enough to handle demanding tasks. This makes it a suitable choice for both professional and home use.

Overall, the Poulan 966513901 stands out in the crowded market of chainsaws due to its powerful performance, user-friendly features, and robust design. Whether you are cutting firewood, maintaining your property, or undertaking more significant landscaping projects, this chainsaw is a reliable companion that delivers efficiency and ease of use.
Top Page Image Contents