Poulan 952802030, 952802031, 952802124 Chain Tension, Checking the tension, Adjusting the tension

Page 7

Adjusting

Screw

Tensioning Rack

4.Slide guide bar on bar bolts until guide bar stops against clutch drum sprocket.

Bar bolts

Guide bar

5.Carefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Cutters

Depth Gauge

Drive Links

6.Place chain over and behind the clutch retainer, fitting the drive links in the clutch drum sprocket.

7.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

8.Fit chain drive links into bar groove.

9.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

10.Hold guide bar against the saw frame and install clutch cover.

11.Install bar nuts and finger tighten only. Once the chain is tensioned, you will need to tighten bar nuts.

CHAIN TENSION

(Including units with chain already installed)

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

NOTE: When adjusting chain tension, make sure the bar nuts are finger tight only. Attempting to tension the chain when the bar nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move chain around guide bar. If the chain does not rotate, it is too tight. If the chain is too loose, it will sag below the bar.

Guide

 

Bar

 

Chain Adjustment

Bar Nuts

Tool

(Bar Tool)

 

Adjusting the tension:

Chain tension is very important. Chains stretch during use. This is especially true during the first few times you use your saw. Always check chain tension each time be- fore you start the chain saw.

An adjusting screw (located on the guide bar) is used to adjust the tension of the chain (see illustration).

1.Turn adjusting screw clockwise until chain solidly contacts bottom of guide bar rail.

Guide bar

Adjusting

Screw

2.Using bar tool, roll chain around guide bar to ensure all links are in bar groove.

3.Lift up tip of guide bar to check for sag. Release tip of guide bar, then turn ad- justing screw clockwise until sag does not exist.

4.While lifting tip of guide bar, tighten bar nuts securely with the bar tool.

Bar Nuts

5.Use the screwdriver end of the bar tool to move chain around guide bar.

6.If chain does not rotate, it is too tight. Slightly loosen bar nuts and loosen chain by turning the adjusting screw. Retighten bar nuts.

7

Image 7
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Using the chain sawAlways use two hands when operating the chain saw Starting ReminderKickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionAvoid Pull-In Reduce the Chance of KickbackMaintain Control Avoid Pinch-KickbackChain Brake and CKA Angle Kickback Safety FeaturesIf your hand slips off the front handlebar Attaching the BAR & Chain If not AssemblyChain Tension Adjusting the tensionChecking the tension Operation Fuel Requirements Before Starting Engine Fueling EngineBAR and Chain Lubrication Kickback occurs Important Points to RememberStarting a Warm Engine Difficult Starting or starting a flooded engineTree Felling Techniques Braking function control Caution The chain brake must beInertia activating function control Operating TipsTypes of Cutting Used for Bucking Notch CUT and Felling the TreeCutting a Fallen Tree Important PointsLimbing Bucking Using a LOG or Support StandBucking Without a Support Limbing and Pruning Important PointsService Check Fuel Mixture Level Inspect and Clean Unit and DecalsClean AIR Filter Cleaning the Spark ARREST- ING ScreenReplace Fuel Filter Chain AdjustmentReplace Spark Plug To Sharpen ChainSeasonal Storage Carburetor AdjustmentStorage Cooling SystemEngine Load Adjustment EngineOther Poulan PRO Charlotte, NC Canada, contactLigations The U.S. Environmental

952802124, 952802030, 952802031 specifications

Poulan, a respected name in outdoor power equipment, offers a range of innovative products designed for lawn care and maintenance. Among its extensive lineup, the models 952802124, 952802030, and 952802031 stand out due to their powerful functionalities and user-friendly features. Each of these models incorporates advanced technologies aimed at enhancing the user experience and ensuring efficient operation.

The Poulan 952802124 model is primarily recognized for its robust performance. It boasts a powerful engine that allows it to handle various tasks with ease. Whether you need to tackle thick grass or overgrown weeds, this model has the capability to deliver optimal results. It features a durable cutting deck that provides an even cut while minimizing the need for multiple passes, ultimately saving time and effort.

In terms of user comfort, the 952802124 integrates ergonomic handles designed for better control and reduced fatigue. This is especially beneficial for extended periods of use, making it a reliable choice for both homeowners and professional landscapers. Additionally, the model is equipped with a quick-start technology, ensuring that you can get to work without unnecessary delays.

The Poulan 952802030 model places a strong emphasis on versatility. It comes with interchangeable attachments, allowing users to customize their equipment according to specific needs. Whether it's leaf blowing, mulching, or trimming, the 952802030 adapts to various tasks efficiently. This flexibility makes the model suitable for different seasons and environments, providing year-round functionality.

Moreover, state-of-the-art safety features are integrated into the design of the 952802030, including a safety lock mechanism that prevents accidental starts, ensuring the user's safety during operation. The lightweight construction also allows for easy maneuverability, making it an ideal choice for navigating tight spaces or uneven terrain.

Meanwhile, the Poulan 952802031 rounds out this trio with its emphasis on energy efficiency. The model is engineered to reduce fuel consumption without compromising performance. It incorporates technologies designed to minimize emissions, aligning with environmentally-friendly practices and regulations. The 952802031 also features an easy-to-access air filter, which simplifies maintenance and prolongs the life of the engine.

In summary, the Poulan 952802124, 952802030, and 952802031 represent excellent choices in the realm of outdoor power equipment. With an emphasis on performance, versatility, safety, and environmental responsibility, these models are well-suited for a variety of lawn care needs, making them valuable investments for consumers. Each model embodies Poulan's commitment to quality and innovation, ensuring satisfaction for both casual users and professionals alike.