Poulan 952802124 Carburetor Adjustment, Cooling System, Seasonal Storage, Fuel System

Page 17

Hook Angle

 

 

0.025 inch

 

 

(0.65 mm)

 

 

Rounded

Right

Corner

 

Too Much Hook Angle

 

Squared Off

 

 

Corner

Wrong

 

WARNING:

Maintain the proper

hook angle according to the manufacturer’s specifications for the chain you are using. Im- proper hook angle will increase the chance of kickback which can result in serious injury.

4. Check and lower depth gauges.

Depth Gauge Tool

File

Depth Gauge

SPlace gauge tool on cutter.

SIf the depth gauge is higher than the depth gauge tool, file it level to the top of

the depth gauge tool.

SMaintain rounded front corner of depth gauge with a flat file.

NOTE: The very top of the depth

gauge should be flat with the front half rounded off with a flat file.

If you require further assistance or are unsure about performing this procedure, contact your authorized service dealer or call our customer assistance help line at 1--800--554--6723.

CARBURETOR ADJUSTMENT

WARNING: The chain will be moving during most of this procedure. Wear your pro- tective equipment and observe all safety pre- cautions. The chain must not move at idle speed.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

SChain moves at idle. See IDLE SPEED--T adjusting procedure.

SSaw will not idle. See IDLE SPEED--T ad- justing procedure.

Idle Speed-T

Allow engine to idle. If the chain moves, idle is too fast. If the engine stalls, idle is too slow. Ad- just speed until engine runs without chain movement (idle too fast) or stalling (idle too slow). The idle speed screw is located in the area above the primer bulb and is labeled T.

STurn idle screw (T) clockwise to increase engine speed.

S Turn idle screw (T) counterclockwise to decrease engine speed.

If you require further assistance or are unsure about performing this procedure, contact your authorized service dealer or call our customer assistance help line at 1--800--554--6723.

COOLING SYSTEM

To keep the working temperature as low as possible the machine is equipped with a cooling system.

The cooling system consists of:

SAir intake on the starter S Air guide plate

S Fins on the flywheel

S Cooling fins on the cylinder

S Cylinder cover (directs cold air over the cylinder)

Clean the cooling system with a brush after each use, more often in demanding condi- tions. A dirty or blocked cooling system re- sults in the machine overheating which causes damage to the piston and cylinder.

STORAGE

WARNING: Perform the following steps after each use:

SAllow the engine to cool, and secure the unit before storing or transporting.

SStore chain saw and fuel in a well venti- lated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore chain saw with all guards in place

and position chain saw so that any sharp object cannot accidentally cause injury.

SStore chain saw well out of the reach of children.

SEASONAL STORAGE

Prepare your unit for storage at the end of the season or if it will not be used for 30 days or more. If your chain saw is to be stored for a period of time:

SClean saw thoroughly before storage.

SStore in a clean dry area.

S Lightly oil external metal surfaces and guide bar.

SOil the chain and wrap it in heavy paper or cloth.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message labeled IMPORTANT regarding the use of gasohol in your chain saw. Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during stor- age. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Follow the mix instructions found on stabilizer containers. Run engine at least 5 minutes after adding stabilizer. Poulan/WEED EATER 40:1, 2-cycle engine oil (air cooled) is blended with fuel stabilizer. If you do not use this oil, you can add a fuel stabilizer to your fuel tank.

17

Image 17
Contents Manual de Instrucciones Manuel d’Instructions Always use two hands when operating the chain saw Using the chain sawStarting Reminder Plan AheadMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InIf your hand slips off the front handlebar Kickback Safety FeaturesChain Brake and CKA Angle Attaching the BAR & Chain If not AssemblyChecking the tension Adjusting the tensionChain Tension Operation BAR and Chain Lubrication Before Starting Engine Fueling EngineFuel Requirements Starting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Kickback occursInertia activating function control Braking function control Caution The chain brake must beOperating Tips Tree Felling TechniquesCutting a Fallen Tree Notch CUT and Felling the TreeImportant Points Types of Cutting Used for BuckingBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points LimbingService Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelReplace Spark Plug Chain AdjustmentTo Sharpen Chain Replace Fuel FilterStorage Carburetor AdjustmentCooling System Seasonal StorageOther Load Adjustment EngineEngine Ligations The U.S. Environmental Charlotte, NC Canada, contactPoulan PRO

952802124, 952802030, 952802031 specifications

Poulan, a respected name in outdoor power equipment, offers a range of innovative products designed for lawn care and maintenance. Among its extensive lineup, the models 952802124, 952802030, and 952802031 stand out due to their powerful functionalities and user-friendly features. Each of these models incorporates advanced technologies aimed at enhancing the user experience and ensuring efficient operation.

The Poulan 952802124 model is primarily recognized for its robust performance. It boasts a powerful engine that allows it to handle various tasks with ease. Whether you need to tackle thick grass or overgrown weeds, this model has the capability to deliver optimal results. It features a durable cutting deck that provides an even cut while minimizing the need for multiple passes, ultimately saving time and effort.

In terms of user comfort, the 952802124 integrates ergonomic handles designed for better control and reduced fatigue. This is especially beneficial for extended periods of use, making it a reliable choice for both homeowners and professional landscapers. Additionally, the model is equipped with a quick-start technology, ensuring that you can get to work without unnecessary delays.

The Poulan 952802030 model places a strong emphasis on versatility. It comes with interchangeable attachments, allowing users to customize their equipment according to specific needs. Whether it's leaf blowing, mulching, or trimming, the 952802030 adapts to various tasks efficiently. This flexibility makes the model suitable for different seasons and environments, providing year-round functionality.

Moreover, state-of-the-art safety features are integrated into the design of the 952802030, including a safety lock mechanism that prevents accidental starts, ensuring the user's safety during operation. The lightweight construction also allows for easy maneuverability, making it an ideal choice for navigating tight spaces or uneven terrain.

Meanwhile, the Poulan 952802031 rounds out this trio with its emphasis on energy efficiency. The model is engineered to reduce fuel consumption without compromising performance. It incorporates technologies designed to minimize emissions, aligning with environmentally-friendly practices and regulations. The 952802031 also features an easy-to-access air filter, which simplifies maintenance and prolongs the life of the engine.

In summary, the Poulan 952802124, 952802030, and 952802031 represent excellent choices in the realm of outdoor power equipment. With an emphasis on performance, versatility, safety, and environmental responsibility, these models are well-suited for a variety of lawn care needs, making them valuable investments for consumers. Each model embodies Poulan's commitment to quality and innovation, ensuring satisfaction for both casual users and professionals alike.