Poulan 545137224 Bucking Without a Support, Bucking Using a LOG or Support Stand, Limbing, Log

Page 13

WARNING: Never turn saw upside down to undercut. The saw cannot be con- trolled in this position.

Always make your first cut on the compres- sion side of the log. The compression side of the log is where the pressure of the log’s weight is concentrated.

First cut on compression side of log

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A SUPPORT

SOvercut through 1/3 of the diameter of the

log.

SRoll the log over and finish with a second

overcut.

SWatch for logs with a compression side to prevent the saw from pinching. See il- lustrations for cutting logs with a compres- sion side.

BUCKING USING A LOG OR SUPPORT STAND

SRemember your first cut is always on the compression side of the log.

(Refer to the illustrations below for your

first and second cut)

S Your first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand

2nd Cut

1st Cut

1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure footing and balance.

SWatch out for springpoles. Springpoles are small size limbs which can catch the saw chain and whip toward you or pull you off bal- ance. Use extreme caution when cutting

small size limbs or slender material.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only

then can limbing be done safely and prop- erly.

SLeave the larger limbs underneath the felled

tree to support the tree as you work.

SStart at the base of the felled tree and work

toward the top, cutting branches and limbs. Remove small limbs with one cut.

SKeep the tree between you and the chain.

Cut from the side of the tree opposite the branch you are cutting.

S Remove larger, supporting branches with the cutting techniques described in BUCK-

ING WITHOUT A SUPPORT.

SAlways use an overcut to cut small and free- ly hanging limbs. Undercutting could cause limbs to fall and pinch the saw.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 545137224 11/30/06 Manual de Instrucciones Manuel d’InstructionsPlan Ahead Starting ReminderTions found in this manual Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InChain Brake and CKA Angle Kickback Safety FeaturesChain saws as set by Ansi B175.1 Attaching the BAR & Chain If not AssemblyChain Tension Adjusting the tensionChecking the tension Operation ON/STOP Switch Throttle TriggerKnow Your Chain SAW CHOKE/FAST Idle Lever Throttle LOCK-OUT Chain BrakePrimer Bulb Before Starting EngineStarting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Right Foot Through Rear HandleInertia activating function control Braking function control Caution The chain brake must beOperating Tips Tree Felling TechniquesNotch CUT and Felling the Tree Felling Large TreesCutting a Fallen Tree Important PointsBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points LimbingService Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelStorage Engine Load Adjustment EngineOther Ligations The U.S. Environmental Limited WarrantyNANCE, Replacement and Repair

545137224 specifications

The Poulan 545137224 is a powerful and versatile chainsaw designed for both professional landscapers and homeowners alike. Renowned for its performance and durability, this model embodies a harmonious blend of advanced technology and user-friendly features, making it a top choice for various cutting tasks.

One of the standout features of the Poulan 545137224 is its 50cc engine, which delivers a robust output, allowing users to tackle heavy-duty cutting jobs with ease. The engine's powerful design ensures efficient fuel consumption, which not only enhances performance but also reduces the frequency of refueling. This makes it ideal for extended use in larger yard projects or logging operations.

Equipped with a 20-inch bar and chain, the Poulan 545137224 allows for deep and precise cuts, cutting through thick wood quickly. This longer guide bar increases the cutting capacity, making it suitable for felling trees, limbing, and general wood cutting tasks. The chainsaw's low kickback chain further enhances safety without sacrificing cutting efficiency, ensuring that users can operate it with confidence.

One of the notable technologies incorporated into this chainsaw is the patented Easy Start system. This innovative feature enables easier pull starts, which is particularly beneficial for those who may struggle with traditional recoil starters. The automatic oiler system is another impressive characteristic, ensuring that the chain is continuously lubricated during use, thus extending the lifespan of both the chain and the bar.

In terms of design, the Poulan 545137224 is crafted with user comfort in mind. It features an ergonomic handle that provides a secure and comfortable grip, reducing fatigue during prolonged use. The chainsaw is also relatively lightweight for its power class, allowing for enhanced maneuverability without sacrificing strength.

For maintenance, the Poulan 545137224 includes tool-less chain tightening, simplifying the process of chain adjustments and replacements. This practical design element saves time and makes upkeep more accessible for all users.

Overall, the Poulan 545137224 represents a reliable choice for anyone in need of a high-performance chainsaw. With its powerful engine, advanced technologies, user-friendly design, and maintenance features, this chainsaw stands out as a reliable tool for a variety of cutting tasks in both residential and commercial settings.
Top Page Image Contents