Poulan 545123644 instruction manual Starting, Fueling Engine, BAR and Chain Lubrication

Page 9

FUELING & LUBRICATION

FUELING ENGINE

WARNING: Remove fuel cap slow- ly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is recommended. A 40:1 ratio is obtained by mixing 3.2 ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline. Included with this saw is a 3.2 ounce container of Poulan/WEED EATER brand synthetic oil. Pour the entire contents of this container into 1 gallon of gasoline to achieve the proper fuel mixture.

DO NOT USE automotive or boat oil. These oils will cause engine damage. When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules listed under HANDLE FUEL WITH CAUTION.

BAR AND CHAIN LUBRICATION

The bar and chain require continuous lubri- cation. Lubrication is provided by the auto- matic oiler system when the oil tank is kept filled. Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/ or discoloration of the bar.

In freezing weather oil will thicken, making it necessary to thin bar and chain oil with a small amount (5 to 10%) of #1 Diesel Fuel or kerosene. Bar and chain oil must be free flowing for the oil system to pump enough oil for adequate lubrication.

Genuine Poulan or Poulan PRO bar and chain oil is recommended to protect your unit against excessive wear from heat and

friction. Poulan or Poulan PRO

oil resists

high temperature thinning. If

Poulan or

Poulan PRO

bar and chain oil is not

available, use a good grade SAE 30 oil.

SNever use waste oil for bar and chain lubri- cation.

SAlways stop the engine before removing the oil cap.

IMPORTANT

Experience indicates that alcohol--blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage for 30 days or longer. Drain the gas tank, start the

engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See STORAGE section for addi- tional information.

STARTING

WARNING: The chain must not move when the engine runs at idle speed. If the chain moves at idle speed refer to CAR- BURETOR ADJUSTMENT within this manual. Avoid contact with the muffler. A hot muffler can cause serious burns.

To stop the engine move the ON/STOP switch to the STOP position.

To start the engine hold the saw firmly on the ground as illustrated. Make sure the chain is free to turn without contacting any object.

Use only 15 --- 18 inches (38 --- 45 cm) of rope per pull.

Hold saw firmly while pulling starter rope.

Starter rope handle

Left hand on front handle

Right foot through rear handle

IMPORTANT POINTS TO REMEMBER

When pulling the starter rope, do not use the full extent of the rope as this can cause the rope to break. Do not let starter rope snap back. Hold the handle and let the rope rewind slowly.

For cold weather starting, start the unit at FULL CHOKE; allow the engine to warm up before squeezing the throttle trigger.

NOTE: Do not cut material with the choke/ fast idle lever at the FULL CHOKE position.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or warm engine after running out of fuel):

NOTE: In the following steps, when the choke/fast idle lever is pulled out to the full extent, the correct throttle setting for starting is set automatically.

ON/STOP SWITCH

(SIDE VIEW)

ON

STOP

1.Move ON/STOP switch to the ON posi- tion.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents English Español Français545123644 Safety Rules Identification of SymbolsStarting Reminder Plan AheadMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackKickback Path Avoid Obstructions Clear Working Area Chain Brake and CKA Angle Kickback Safety FeaturesGuide bar up and back toward the operator Back toward the operatorAdjusting Screw Tensioning Rack AssemblyComputed kickback angle CKA Table LengthAdjusting the tension Checking the tensionMount the Bar Know Your SAW ON/STOP SwitchThrottle Trigger Throttle LockoutFueling Engine StartingBAR and Chain Lubrication Important Points to RememberCutting Methods Starting a Warm EngineImportant Points Tree Felling Techniques Felling Large TreesNotch CUT and Felling the Tree Cutting a Fallen Tree Bucking Using a LOG or Support StandTypes of Cutting Used for Bucking Bucking Without a SupportLimbing and Pruning Important Points ServiceLimbing PruningCleaning the Spark ARREST- ING Screen Cleaning the air filterAIR Filter Inspect Muffler and Spark Arresting ScreenBAR Maintenance Carburetor AdjustmentChain Sharpening Ignition TimingNeed Service PART? Limited WarrantyNeed ASSISTANCE? Need ASSISTANCE?Tions The U.S. Environmental Protection Your Warranty Rights and ObligaIntermediate 125 hours Extended 300 hours

545123644 specifications

The Poulan 545123644 is a powerful chainsaw designed to meet the needs of homeowners and light commercial users. Known for its reliability and ease of use, this chainsaw has become a popular choice for those looking to tackle various cutting tasks efficiently. With a focus on performance, the Poulan 545123644 features a robust engine that delivers exceptional power. Equipped with a 50cc two-stroke gasoline engine, it offers a balance of torque and RPM, making it ideal for felling trees, limb removal, and cutting firewood.

One of the standout features of the Poulan 545123644 is its lightweight design, which enhances maneuverability and reduces operator fatigue during extended use. Weighing in at just over 11 pounds, it allows users to manage their cutting tasks with ease. The chainsaw also incorporates an ergonomic handle that ensures a comfortable grip, promoting better control while operating.

The chainsaw's 20-inch bar length provides ample reach for cutting larger logs and branches without excessive effort. It also comes equipped with a low-kickback chain, which enhances safety by minimizing the risk of kickback incidents—a common concern for chainsaw users. This feature is particularly important for both novice and experienced operators.

To further enhance performance, the Poulan 545123644 utilizes advanced technologies such as an automatic oiling system, ensuring the chain receives the lubrication it needs for smooth operation. This not only prolongs the lifespan of the chain but also reduces maintenance, allowing users to focus on their cutting tasks.

Another noteworthy aspect of the Poulan chainsaw is its easy-start mechanism, which utilizes a spring-assisted pull starter. This innovation significantly reduces the effort required to start the engine, making it user-friendly, particularly for those who may struggle with traditional starting methods.

In terms of durability, the Poulan 545123644 features a rugged construction that withstands the rigors of regular use, ensuring longevity. Its air filtration system also helps to extend engine life by keeping dust and debris out of the engine.

Overall, the Poulan 545123644 combines power, safety, and ease of use, making it an excellent choice for those looking to tackle outdoor projects with confidence. Whether you are pruning trees or preparing firewood for winter, this chainsaw delivers reliability and performance, ensuring that you can complete your tasks efficiently.
Top Page Image Contents