Poulan 545123644 Service, Limbing and Pruning Important Points, Important Have all

Page 13

1st Cut

2nd Cut

Using a support stand

2nd Cut

1st Cut

1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or ob- jects at the nose of the guide bar when limb- ing or pruning. Allowing such contact can re- sult in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, platforms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure foot- ing and balance.

S Watch out for springpoles. Springpoles are small size limbs which can catch the saw chain and whip toward you or pull you off balance. Use extreme caution when cutting small size limbs.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

SKeep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only then can limbing be done safely and prop-

erly.

S Leave the larger limbs underneath the felled tree to support the tree as you work.

SStart at the base of the felled tree and work toward the top, cutting branches and

limbs. Remove small limbs with one cut.

SKeep the tree between you and the chain.

Cut from the side of the tree opposite the branch you are cutting.

SRemove larger, supporting branches with

the cutting techniques described in BUCK-

ING WITHOUT A SUPPORT.

SAlways use an overcut to cut small and freely hanging limbs. Undercutting could cause limbs to fall and pinch the saw.

PRUNING

WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a professional to do the job.

SMake your fist cut 1/3 of the way

through the bottom of the limb.

SNext make a 2nd cut all the way through the limb. Then cut a third overcut leaving a 1 to 2 inch (2.5 -- 5 cm) collar from the truck of the tree.

Second cut

Third cut

Collar

First cut

Pruning technique

SERVICE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

We recommend all service and adjustments not listed in this manual be performed by an authorized service dealer.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Español Français English545123644 Safety Rules Identification of SymbolsStarting Reminder Plan AheadMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackReduce the Chance of Kickback Maintain ControlKickback Path Avoid Obstructions Clear Working Area Chain Brake and CKA Angle Kickback Safety FeaturesGuide bar up and back toward the operator Back toward the operatorAdjusting Screw Tensioning Rack AssemblyComputed kickback angle CKA Table LengthChecking the tension Adjusting the tensionMount the Bar Know Your SAW ON/STOP SwitchThrottle Trigger Throttle LockoutFueling Engine StartingBAR and Chain Lubrication Important Points to RememberStarting a Warm Engine Cutting MethodsImportant Points Felling Large Trees Tree Felling TechniquesNotch CUT and Felling the Tree Cutting a Fallen Tree Bucking Using a LOG or Support StandTypes of Cutting Used for Bucking Bucking Without a SupportLimbing and Pruning Important Points ServiceLimbing PruningCleaning the Spark ARREST- ING Screen Cleaning the air filterAIR Filter Inspect Muffler and Spark Arresting ScreenBAR Maintenance Carburetor AdjustmentChain Sharpening Ignition TimingNeed Service PART? Limited WarrantyNeed ASSISTANCE? Need ASSISTANCE?Tions The U.S. Environmental Protection Your Warranty Rights and ObligaIntermediate 125 hours Extended 300 hours

545123644 specifications

The Poulan 545123644 is a powerful chainsaw designed to meet the needs of homeowners and light commercial users. Known for its reliability and ease of use, this chainsaw has become a popular choice for those looking to tackle various cutting tasks efficiently. With a focus on performance, the Poulan 545123644 features a robust engine that delivers exceptional power. Equipped with a 50cc two-stroke gasoline engine, it offers a balance of torque and RPM, making it ideal for felling trees, limb removal, and cutting firewood.

One of the standout features of the Poulan 545123644 is its lightweight design, which enhances maneuverability and reduces operator fatigue during extended use. Weighing in at just over 11 pounds, it allows users to manage their cutting tasks with ease. The chainsaw also incorporates an ergonomic handle that ensures a comfortable grip, promoting better control while operating.

The chainsaw's 20-inch bar length provides ample reach for cutting larger logs and branches without excessive effort. It also comes equipped with a low-kickback chain, which enhances safety by minimizing the risk of kickback incidents—a common concern for chainsaw users. This feature is particularly important for both novice and experienced operators.

To further enhance performance, the Poulan 545123644 utilizes advanced technologies such as an automatic oiling system, ensuring the chain receives the lubrication it needs for smooth operation. This not only prolongs the lifespan of the chain but also reduces maintenance, allowing users to focus on their cutting tasks.

Another noteworthy aspect of the Poulan chainsaw is its easy-start mechanism, which utilizes a spring-assisted pull starter. This innovation significantly reduces the effort required to start the engine, making it user-friendly, particularly for those who may struggle with traditional starting methods.

In terms of durability, the Poulan 545123644 features a rugged construction that withstands the rigors of regular use, ensuring longevity. Its air filtration system also helps to extend engine life by keeping dust and debris out of the engine.

Overall, the Poulan 545123644 combines power, safety, and ease of use, making it an excellent choice for those looking to tackle outdoor projects with confidence. Whether you are pruning trees or preparing firewood for winter, this chainsaw delivers reliability and performance, ensuring that you can complete your tasks efficiently.
Top Page Image Contents