Poulan 175682 owner manual Storage, Other, Fuel System, Engine OIL, Cylinders

Page 24

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

CAUTION: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

•Clean entire tractor (See “CLEANING” in the Customer Responsibilities section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Customer Responsibilities section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage during long periods of storage, battery cables should be discon- nected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Customer Respon- sibilities section of this manual).

•After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

•If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL H O S E , O R T A N K D U R I N G S T O R A G E . A L S O , EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Drain the fuel tank.

•Start the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during stor- age. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Customer Responsibilities section of this manual).

CYLINDER(S)

•Remove spark plug(s).

•Pour one ounce of oil through spark plug hole(s) into cylinder(s).

•Turn ignition key to “START” position for a few seconds to distribute oil.

•Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your tractor indoors and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents PR18542STC Safety Rules Safe Operation Practices for RIDE-ON MowersTable of Contents Product Specifications Customer ResponsibilitiesUnassembled Hardware Steering WheelSeat Keys Slope SheetAssembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig To SET UP Your Mower for Mulching To Convert to Bagging or DischargingCheck Tire Pressure Check Deck LevelnessOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigMulching Mowing Tips General Recommendations Lubrication Chart Customer ResponsibilitiesBefore Each USE Tractor Engine Cleaning Engine OIL FilterMuffler Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Adjust Brake See Fig Transaxle Gear Shift Lever Neutral Adjustment See FigTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigReplacing Battery See Figs To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Throttle Control Cable See Fig To Adjust Choke Control See FigTo Adjust Carburetor Storage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionWhen operator leaves Schematic Tractor - Model Number PR18542STCElectrical 2122175158 175566175141 121433XChassis and Enclosures 174619 17655430 169470X428 Fender 174930Drive 175410 17576572140608 73900600Steering Assembly 175121 177876175146 175118Seat Assembly 174894Decals Wheels and TiresEngine Optional Equipment Spark ArresterEngine Mower Deck 71081010 17449317060514 165890X421Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Page Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation Sighting GuideParts and Service

175682 specifications

The Poulan 175682 is a robust and versatile chainsaw designed for both residential and light commercial use. Known for its reliability and performance, it is a favorite among homeowners, landscapers, and those tackling outdoor projects. This chainsaw strikes a perfect balance between power and maneuverability, making it an excellent choice for cutting firewood, trimming trees, and clearing brush.

One of the main features of the Poulan 175682 is its powerful engine. Equipped with a 42cc two-stroke engine, it delivers consistent power to handle various cutting tasks efficiently. This engine is designed for optimal performance, ensuring that the saw runs smoothly even in demanding conditions. Additionally, the engine incorporates advanced technology that reduces fuel consumption and emissions, making it an environmentally friendly choice for users concerned about their ecological footprint.

The chainsaw's cutting capability is enhanced by a durable 18-inch bar and chain. The length provides enough reach to tackle larger logs while remaining manageable for precise cutting. The chain is designed for sharpness and longevity, enabling users to make clean cuts with minimal effort. Furthermore, the automatic oiler system ensures that the chain remains lubricated during operation, reducing wear and tear while prolonging the chainsaw's lifespan.

Another standout feature of the Poulan 175682 is its user-friendly design. The weight is well-balanced, allowing for easy handling and control during use. It comes equipped with an anti-vibration system, which minimizes vibrations felt by the operator, reducing fatigue during extended periods of cutting. Safety features, such as the chain brake and throttle lockout, add an extra layer of protection for users, making it a trustworthy option even for those new to chainsaw operation.

In terms of maintenance, the Poulan 175682 is designed with convenience in mind. The easily accessible air filter and spark plug make routine upkeep straightforward, enabling users to keep their chainsaw in top condition. With its combination of power, ease of use, and safety features, the Poulan 175682 is an excellent investment for anyone looking to tackle a variety of cutting tasks efficiently and safely. Whether for firewood preparation or yard maintenance, this chainsaw delivers the performance needed to get the job done effectively.
Top Page Image Contents