Poulan 530087823 Computed kickback angle CKA Table, Safety Notice Exposure to

Page 6

Computed kickback angle (CKA) Table

 

BAR

 

 

 

CKA without chain brake

MODEL

P/N

Length

 

CHAIN P/N

295

952044815

20”

952051310

19_

 

 

 

 

 

 

NOTE: This saw complies with Federal OSHA regulations for commercial logging.

SAFETY NOTICE: Exposure to

vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: Your saw is equipped with a temperature limiting muffler and spark arresting screen which meets the requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require by law that many internal combustion engines to be equipped with a spark arrestor screen. If you operate a chain saw in a state or locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. Refer to the SERVICE section for maintenance of the Spark Arrestor.

Failure to follow all Safety Rules and Precau- tions can result in serious injury. If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your Authorized Service Dealer or call 1-800--554--6723.

Protective gloves (not provided) should be worn during assembly.

ATTACHING THE BAR & CHAIN (If not

already attached)

WARNING: If received assembled, repeat all steps to ensure your saw is prop- erly assembled and all fasteners are secure. Always wear gloves when handling the chain. The chain is sharp and can cut you even when it is not moving!

SLoosen and remove the chain brake nuts and the chain brake from the saw.

S Remove the plastic shipping spacer (if present).

Location of shipping spacer

 

 

 

 

 

 

 

 

 

 

 

 

 

Chain Brake

Chain Brake

Nuts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bar Tool

STurn adjusting screw on bar counterclock- wise to move the tensioning rack as far as it will go toward the front of the bar.

Adjusting

Screw

Tensioning Rack

SMount the bar as illustrated.

SSlide the bar behind clutch drum until bar

stops against clutch drum sprocket.

SPrepare the chain by checking the proper direction. Without following the illustration it is easy to place the chain on the saw in the wrong direction. Use the illustration of the chain to determine the proper direc- tion.

SPlace the chain onto the sprocket located behind the clutch drum (see illustration). Fit the chain between the teeth in the sprocket.

SStart at the top of the bar and fit chain into groove around the guide bar.

SPull the bar forward until the chain is snug in the groove of the bar. Ensure all drive links are in the bar groove.

SHold guide bar against the saw frame and

install the chain brake.

SReplace the chain brake nuts and tighten finger tight. Once the chain is tensioned you will need to tighten chain brake nuts.

6

Image 6
Contents 295 WCI Outdoor Products, IncClothing Gloves Safety Sa fety Chaps Shoes Plan AheadMaintain Your SAW in Good Working Order Never try to start the saw when the guide bar is in a cutOperate Your SAW Safely Handle Fuel with CautionReduce the Chance Kickback Kickback Safety FeaturesMaintain Control Always begin cutting with the engine at fullChain Brake and CKA Angle BarSafety Notice Exposure to Computed kickback angle CKA TableBAR and Chain Lubrication Adjusting the tensionFueling Engine Never use waste oil for bar and chain lubri- cationChain Brake Important Points to RememberStarting a Warm Engine Right foot through rear handleImportant Points Braking function controlInertia activating function control Tree Felling TechniquesCutting a Fallen Tree Felling Large TreesNotch CUT and Felling the Tree Plan a clear retreat pathBucking Without a Support Bucking Using a LOG or Support StandTypes of Cutting Used for Bucking Limbing and PruningLimbing Cleaning the air filterImportant Points PruningTroubleshooting Table Spark Plug StorageContact your retailer Ligations The U. S. EnvironmentalRepair or Replacement of Parts

530087823 specifications

The Poulan 530087823 is a powerful and versatile chainsaw, well-regarded for its reliability and ease of use. Designed for both professional landscapers and homeowners, this model stands out with its user-friendly features and robust performance, making it an ideal tool for a variety of cutting tasks.

One of the key features of the Poulan 530087823 is its 18-inch cutting bar, which allows for efficient cutting of larger logs and branches. This ample size strikes a balance between maneuverability and cutting capability, making it suitable for both trimming and heavier jobs. The chainsaw is powered by a dependable gas engine, which delivers the power necessary to tackle tough tasks with ease.

Equipped with advanced technologies, this model benefits from a patented air filtration system that ensures cleaner air intake, extending the life of the engine. This feature minimizes maintenance by reducing the frequency of filter changes, allowing users to focus on their work rather than upkeep. Additionally, the Poulan 530087823 incorporates an anti-vibration system that enhances the comfort of use; it reduces fatigue during extended cutting sessions, leading to improved accuracy and safety.

User convenience is emphasized by the chainsaw's tool-less chain adjustment system, which enables quick and hassle-free adjustments to the chain tension without the need for additional tools. This feature is particularly valuable during outdoor use, where convenience and efficiency are paramount. Moreover, the chainsaw features a primer bulb for easy starting, reducing the effort required to fire up the engine.

The Poulan 530087823 also comes with a safety chain brake, which is a critical feature in preventing accidents during operation. This brake system engages quickly in the event of kickback, stopping the chain immediately and enhancing user safety.

Overall, the Poulan 530087823 stands out due to its combination of powerful performance, user-friendly features, and a strong emphasis on safety. With its durable construction and advanced technologies, this chainsaw is a reliable choice for both casual users and professionals, capable of handling a wide range of cutting tasks effectively. Whether trimming branches or felling small trees, the Poulan 530087823 provides the performance and innovation needed to get the job done.