Adjusting the tension, Fueling Engine | Poulan 530087823 specification

Mount the bar

Tip of Bar

S Tighten bar clamp nuts with the bar tool. Torque to 10--15 ft/lbs.

Chain Brake

Nuts

Proper chain direction

Place chain onto the sprocket

CHAIN TENSION (Including units with chain already installed)

NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

SAn adjusting screw (located on the guide bar) is used to adjust the tension of the chain (see illustration). Turn adjusting screw clockwise until chain solidly con- tacts bottom of guide bar rail.

Guide bar

Adjusting

Screw

SUsing the screwdriver end of the bar tool, roll chain around guide bar to ensure all links are in bar groove.

Chain Brake Nuts	Chain Adjustment
	Tool (Bar Tool)

SLift up tip of guide bar to check for sag. Re- lease tip of guide bar, then turn adjusting screw until sag does not exist.

SUse the screwdriver end of the bar tool to

move chain around guide bar.

S If chain does not rotate, it is too tight. Slightly loosen bar clamp nuts and loosen chain by turning the adjusting screw. Re- tighten bar clamp nuts.

SIf chain is too loose, it will sag below the guide bar. DO NOT operate the saw if the chain is loose.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

FUELING ENGINE

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality

2-cycle air-cooled engine oil. We recommend Poulan or Poulan ProR brand oil. If you do not use this oil, use a good quality 2-cycle air-cooled oil designed to be mixed at a ratio of 40:1 (A 40:1 ratio is obtained by mixing 3.2 onces of oil with 1 gallon of unleaded gasoline). DO NOT USE automotive or boat oil. These oils will cause engine damage. When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules listed under

HANDLE FUEL WITH CAUTION.

BAR AND CHAIN LUBRICATION

The bar and chain require continuous lubri- cation. Lubrication is provided by the auto- matic oiler system when the oil tank is kept filled. Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/ or discoloration of the bar.

In freezing weather oil will thicken, making it necessary to thin bar and chain oil with a small amount (5 to 10%) of #1 Diesel Fuel or kerosene. Bar and chain oil must be free flowing for the oil system to pump enough oil for adequate lubrication.

Genuine Poulan or Poulan ProR bar and chain oil is recommended to protect your unit against excessive wear from heat and friction. Poulan or Poulan ProR oil resists high temperature thinning. If Poulan or Poulan ProR bar and chain oil is not available, use a good grade SAE 30 oil.

SNever use waste oil for bar and chain lubri- cation.

530087823 specifications

The Poulan 530087823 is a powerful and versatile chainsaw, well-regarded for its reliability and ease of use. Designed for both professional landscapers and homeowners, this model stands out with its user-friendly features and robust performance, making it an ideal tool for a variety of cutting tasks.

One of the key features of the Poulan 530087823 is its 18-inch cutting bar, which allows for efficient cutting of larger logs and branches. This ample size strikes a balance between maneuverability and cutting capability, making it suitable for both trimming and heavier jobs. The chainsaw is powered by a dependable gas engine, which delivers the power necessary to tackle tough tasks with ease.

Equipped with advanced technologies, this model benefits from a patented air filtration system that ensures cleaner air intake, extending the life of the engine. This feature minimizes maintenance by reducing the frequency of filter changes, allowing users to focus on their work rather than upkeep. Additionally, the Poulan 530087823 incorporates an anti-vibration system that enhances the comfort of use; it reduces fatigue during extended cutting sessions, leading to improved accuracy and safety.

User convenience is emphasized by the chainsaw's tool-less chain adjustment system, which enables quick and hassle-free adjustments to the chain tension without the need for additional tools. This feature is particularly valuable during outdoor use, where convenience and efficiency are paramount. Moreover, the chainsaw features a primer bulb for easy starting, reducing the effort required to fire up the engine.

The Poulan 530087823 also comes with a safety chain brake, which is a critical feature in preventing accidents during operation. This brake system engages quickly in the event of kickback, stopping the chain immediately and enhancing user safety.

Overall, the Poulan 530087823 stands out due to its combination of powerful performance, user-friendly features, and a strong emphasis on safety. With its durable construction and advanced technologies, this chainsaw is a reliable choice for both casual users and professionals, capable of handling a wide range of cutting tasks effectively. Whether trimming branches or felling small trees, the Poulan 530087823 provides the performance and innovation needed to get the job done.