Poulan 350, 530164364 Service, Limbing and Pruning Important Points, Important Have all

Page 13

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand

2nd Cut

1st Cut

1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure footing and balance.

SWatch out for springpoles. Springpoles are small size limbs which can catch the saw chain and whip toward you or pull you off bal-

ance. Use extreme caution when cutting small size limbs or slender material.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only then can limbing be done safely and prop-

erly.

SLeave the larger limbs underneath the felled tree to support the tree as you work.

SStart at the base of the felled tree and work toward the top, cutting branches and limbs. Remove small limbs with one cut.

SKeep the tree between you and the chain. Cut from the side of the tree opposite the

branch you are cutting.

S Remove larger, supporting branches with the cutting techniques described in BUCK-

ING WITHOUT A SUPPORT.

SAlways use an overcut to cut small and free- ly hanging limbs. Undercutting could cause limbs to fall and pinch the saw.

PRUNING

WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a professional to do the job.

SMake your first cut 1/3 of the way through the

bottom of the limb.

SNext make a 2nd cut all the way through the limb. Then cut a third overcut leaving a 1 to 2 inch (2.5 to 5 cm) collar from the truck of the tree.

Second cut

Third cut

Collar

First cut

Pruning technique

SERVICE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

We recommend all service and adjustments not listed in this manual be performed by an authorized or Master Service Dealer.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Electrolux Home Products, Inc., may not pay for repairs under war- ranty. It is your responsibility to maintain and perform general maintenance.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents English Español Français Manual de Instrucciones Manuel d’InstructionsSafety Rules Identification of SymbolsPlan Ahead Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackReduce the Chance of Kickback Kickback Safety FeaturesMaintain Control WE do not REP Chain Brake and CKA AngleResent and YOU should not AS Sume That the Chain Brake willInside view Chain Brake Adjustment located on Chain Brake AssemblyAttaching the BAR & Chain If not Chain Brake NutsChecking the tension Adjusting the tensionChain Tension Know Your Chain SAW ON/STOP SwitchThrottle Trigger Throttle LOCK-OUTFueling Engine StartingBAR and Chain Lubrication Important Points to RememberStarting a Warm Engine Cutting MethodsImportant Points Felling Large Trees Tree Felling TechniquesNotch CUT and Felling the Tree Direction of FallCutting a Fallen Tree Bucking Using a LOG or Support StandTypes of Cutting Used for Bucking Bucking Without a SupportLimbing and Pruning Important Points ServiceLimbing PruningCleaning the Spark ARREST- ING Screen Cleaning the air filterAIR Filter Inspect Muffler and Spark Arresting ScreenBAR Maintenance Carburetor AdjustmentChain Sharpening Ignition TimingNeed ASSISTANCE? Need Service PART?Storage Need ASSISTANCE?Tions The U.S. Environmental Protection Limited WarrantyElectrolux Home PRODUCTS, INC Placement and Repair of Emission

530164364, 350 specifications

The Poulan 350,530164364 is a remarkable chainsaw that has made its mark as a reliable tool for both professionals and homeowners. Designed for versatility and ease of use, this chainsaw features a robust engine that delivers consistent power for a variety of cutting tasks.

One of the standout features of the Poulan 350 is its potent 2-stroke engine, which offers a balance of power and efficiency. With a displacement of around 50cc, this chainsaw can handle larger cutting jobs, making it suitable for everything from pruning trees to felling medium-sized ones. The engine is designed to provide high torque at low RPMs, ensuring that users can tackle tough wood without excessive strain on the machine or themselves.

In addition to its powerful engine, the Poulan 350 incorporates advanced technologies that enhance its usability. The chainsaw features an automatic oiling system that lubricates the bar and chain continuously, minimizing wear and ensuring smooth operation. This system is particularly useful during prolonged use, as it helps maintain the cutting performance and prolongs the life of the chain.

Comfort is another key characteristic of the Poulan 350,530164364. The chainsaw is designed with an ergonomic handle that reduces vibrations, allowing users to operate the tool comfortably for extended periods. Additionally, the lightweight construction of the equipment makes it easy to maneuver, reducing fatigue during demanding tasks.

Safety is a priority with this model, which includes several features aimed at protecting the user. The chainsaw is equipped with a chain brake that activates instantly if kickback occurs, stopping the chain's movement to reduce the risk of injury. Moreover, the Poulan 350 comes with a throttle lock that ensures the chainsaw operates only when intended.

Maintenance is simplified with the Poulan 350,530164364, as it features a tool-less access system for the air filter and spark plug. This design allows for quick and hassle-free servicing of the chainsaw, ensuring that it remains in optimal working condition.

In summary, the Poulan 350,530164364 combines power, innovation, and user-friendly features, making it an ideal choice for those looking to tackle a variety of cutting jobs effectively and safely. Whether you're a seasoned professional or a DIY enthusiast, this chainsaw is designed to deliver performance and reliability.
Top Page Image Contents