Poulan 350, 530164364 Chain Brake and CKA Angle, WE do not REP, Resent and YOU should not AS

Page 5

Reduced Kickback Symmetrical Guide Bar

Small Radius Tip

Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a contoured depth gauge and guard link which deflect kickback force and allow wood to gradually ride into the cutter. Low-- Kickback Chain has met kickback per- formance requirements when tested on a representative sample of chain saws be- low 3.8 cubic inch displacement specified in ANSI B175.1.

Contoured Depth Gauge

 

Elongated Guard Link

 

Deflects

Low--- Kickback

kickback force

and allows wood

Chain

to gradually ride

 

into cutter

caused by allowing contact of the bar tip in the danger zone with any hard object. Kickback can also be caused by pinching the saw chain along the top of the guide bar. This action may push the guide bar rapidly back toward the op- erator. Either of these events may cause you to lose control of the saw which could result in serious injury or even death. DO NOT RELY UPON ANY OF THE DEVICES BUILT INTO YOUR SAW. YOU SHOULD USE THE SAW PROPERLY AND CAREFULLY TO AVOID KICKBACK. Reduced--kickback guide bars and low--kickback saw chains reduce the chance and magnitude of kickback and are recommended. Your saw has a low kickback chain and bar as original equipment. Repairs on a chain brake should be made by an autho- rized servicing dealer. Take your unit to the place of purchase if purchased from a servic- ing dealer, or to the nearest authorized master service dealer.

STip contact in some cases may cause a light- ning fast reverse REACTION, kicking guide

bar up and back toward operator.

SPinching the saw chain along the top of the guide bar may push the guide bar rapidly back toward the operator.

SEither of these reactions may cause you to lose control of the saw which could result in serious injury. Do not rely exclusively upon devices built into your saw.

 

 

 

 

 

WARNING:

Computed kickback

 

 

 

 

 

angle (CKA) listed on your saw and listed in the

 

 

 

Can Obstruct Material

CKA table below represents angle of kickback

 

Not a Low--- Kickback Chain

 

your bar and chain

combinations will have

 

 

when tested in accordance with CSA (Cana-

S

Front Hand Guard, designed to reduce the

dian Standards Association) and ANSI stan-

 

chance of your left hand contacting the chain

 

dards. When purchasing replacement bar and

 

if your hand slips off the front handlebar.

 

chain, considerations should be given to the

S

Position of front and rear handlebars, de-

lower CKA values. Lower CKA values repre-

 

signed with distance between handles and

 

sent safer angles to the user, higher values in-

 

“in-line” with each other. The spread and

 

dicate more angle and higher kick energies.

 

“in-line” position of the hands provided by

 

Computed angles represented indicate total

 

this design work together to give balance

 

energy and angle associated without activation

 

and resistance in controlling the pivot of

 

of the chain brake during kickback. Activated

 

the saw back toward the operator if kick-

 

angle represents chain stopping time relative to

 

back occurs.

 

 

 

 

 

activation angle of chain break and resulting

CHAIN BRAKE AND CKA ANGLE

kick angle of saw. In all cases lower CKA val-

S Chain Brake, designed to stop the chain in

ues represent a safer operating environment

 

the event of kickback.

 

for the user.

 

 

WARNING:

WE DO NOT REP-

The following guide bar and chain combina-

 

tions meet kickback requirements of CSA

RESENT AND YOU SHOULD NOT AS-

Standards Z62.1, Z62.3, & ANSI B175.1

SUME THAT THE CHAIN BRAKE WILL

when used on saws listed in this manual.

PROTECT YOU IN THE EVENT OF A KICK-

Use of bar and chain combinations other

BACK. Kickback is

a lightning fast action

than those listed is not recommended and

which throws the bar and rotating chain back

may not meet the CKA requirements per

and up toward the operator. Kickback can be

standard.

 

Computed kickback angle (CKA) Table

 

 

 

 

 

 

 

 

 

 

LE SERIES

 

BAR

 

 

CKA without chain brake

 

MODEL

 

P/N

Length

CHAIN P/N

 

1950/1975/2050

 

952044368

14″

952051209

 

24_

 

2055/2075/

 

952044370

16″

952051211

 

19_

 

2150/2150PR

 

 

 

 

 

 

 

 

 

 

2155/2175/

 

952044418

18″

952051338

 

14_

 

2350/2375

 

 

 

 

 

 

 

 

 

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents English Español Français Manual de Instrucciones Manuel d’InstructionsPlan Ahead Identification of SymbolsSafety Rules Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Kickback Safety FeaturesReduce the Chance of Kickback WE do not REP Chain Brake and CKA AngleResent and YOU should not AS Sume That the Chain Brake willInside view Chain Brake Adjustment located on Chain Brake AssemblyAttaching the BAR & Chain If not Chain Brake NutsChain Tension Adjusting the tensionChecking the tension Know Your Chain SAW ON/STOP SwitchThrottle Trigger Throttle LOCK-OUTFueling Engine StartingBAR and Chain Lubrication Important Points to RememberImportant Points Cutting MethodsStarting a Warm Engine Felling Large Trees Tree Felling TechniquesNotch CUT and Felling the Tree Direction of FallCutting a Fallen Tree Bucking Using a LOG or Support StandTypes of Cutting Used for Bucking Bucking Without a SupportLimbing and Pruning Important Points ServiceLimbing PruningCleaning the Spark ARREST- ING Screen Cleaning the air filterAIR Filter Inspect Muffler and Spark Arresting ScreenBAR Maintenance Carburetor AdjustmentChain Sharpening Ignition TimingNeed ASSISTANCE? Need Service PART?Storage Need ASSISTANCE?Electrolux Home PRODUCTS, INC Limited WarrantyTions The U.S. Environmental Protection Placement and Repair of Emission

530164364, 350 specifications

The Poulan 350,530164364 is a remarkable chainsaw that has made its mark as a reliable tool for both professionals and homeowners. Designed for versatility and ease of use, this chainsaw features a robust engine that delivers consistent power for a variety of cutting tasks.

One of the standout features of the Poulan 350 is its potent 2-stroke engine, which offers a balance of power and efficiency. With a displacement of around 50cc, this chainsaw can handle larger cutting jobs, making it suitable for everything from pruning trees to felling medium-sized ones. The engine is designed to provide high torque at low RPMs, ensuring that users can tackle tough wood without excessive strain on the machine or themselves.

In addition to its powerful engine, the Poulan 350 incorporates advanced technologies that enhance its usability. The chainsaw features an automatic oiling system that lubricates the bar and chain continuously, minimizing wear and ensuring smooth operation. This system is particularly useful during prolonged use, as it helps maintain the cutting performance and prolongs the life of the chain.

Comfort is another key characteristic of the Poulan 350,530164364. The chainsaw is designed with an ergonomic handle that reduces vibrations, allowing users to operate the tool comfortably for extended periods. Additionally, the lightweight construction of the equipment makes it easy to maneuver, reducing fatigue during demanding tasks.

Safety is a priority with this model, which includes several features aimed at protecting the user. The chainsaw is equipped with a chain brake that activates instantly if kickback occurs, stopping the chain's movement to reduce the risk of injury. Moreover, the Poulan 350 comes with a throttle lock that ensures the chainsaw operates only when intended.

Maintenance is simplified with the Poulan 350,530164364, as it features a tool-less access system for the air filter and spark plug. This design allows for quick and hassle-free servicing of the chainsaw, ensuring that it remains in optimal working condition.

In summary, the Poulan 350,530164364 combines power, innovation, and user-friendly features, making it an ideal choice for those looking to tackle a variety of cutting jobs effectively and safely. Whether you're a seasoned professional or a DIY enthusiast, this chainsaw is designed to deliver performance and reliability.
Top Page Image Contents