Poulan 2004-06, 530164817 Checking the tension, Adjusting the tension, Guide bar Adjusting Screw

Page 7

6.Place the chain over and behind the clutch, fitting the drive links in the clutch drum sprocket.

Place chain onto the sprocket

7.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

8.Fit chain drive links in to bar groove.

9.Pull the bar forward until the chain is snug in the groove of the bar. Ensure all drive links are in the bar groove.

10.Hold guide bar against the saw frame and install the chain brake.

11.Replace the chain brake nuts and tighten finger tight. Once the chain is tensioned you will need to tighten chain brake nuts.

CHAIN TENSION (Including units with chain already installed)

NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag below the bar.

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

An adjusting screw (located on the guide bar) is used to adjust the tension of the chain (see illustration).

STurn adjusting screw clockwise until chain solidly contacts bottom of guide bar rail.

Guide bar

Adjusting

Screw

SUsing the screwdriver end of the bar tool, roll chain around guide bar to ensure all

links are in bar groove.

SLift up tip of guide bar to check for sag. Re- lease tip of guide bar, then turn adjusting screw until sag does not exist.

STighten bar clamp nuts securely with the bar tool.

Chain Brake

Nuts

SUse the screwdriver end of the bar tool to move chain around guide bar.

S If chain does not rotate, it is too tight. Slightly loosen bar clamp nuts and loosen chain by turning the adjusting screw. Re- tighten bar clamp nuts.

SIf chain is too loose, it will sag below the guide bar. DO NOT operate the saw if the chain is loose.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents English Español Français Manual de Instrucciones Manuel d’InstructionsSafety Rules Identification of SymbolsPlan Ahead Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionAvoid Obstructions Clear The Working Area Kickback Safety FeaturesReduce the Chance of Kickback Maintain Control530044834 16″ 530051211 Chain Brake and CKA AngleComputed kickback angle CKA Table LengthMount the Bar AssemblyAttaching the BAR & Chain If not Chain Brake NutsChecking the tension Adjusting the tensionChain Tension Including units with chain already installed Guide bar Adjusting ScrewThrottle Lockout ON/STOP SwitchKnow Your SAW Throttle TriggerImportant Points to Remember StartingFueling Engine BAR and Chain LubricationStarting a Warm Engine Cutting MethodsImportant Points Direction of Fall Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeBucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingPruning ServiceLimbing and Pruning Important Points LimbingInspect Muffler and Spark Arresting Screen Cleaning the air filterCarburetor Adjustment BAR MaintenanceNeed ASSISTANCE? Load Adjustment Engine Limited WarrantyEmpty fuel tank and refill with Electrolux Home PRODUCTS, INC Ligations The U. S. EnvironmentalIntermediate 125 hours Extended 300 hours

2004-06, 530164817 specifications

The Poulan 2004-06, model 530164817, is a formidable machine in the world of outdoor power equipment, particularly known for its reliability and efficiency. Designed primarily for homeowners and light landscaping professionals, this model combines user-friendly features with robust performance.

One of the standout characteristics of the Poulan 530164817 is its powerful engine. This chainsaw is equipped with a reliable two-cycle engine, delivering ample horsepower for various cutting tasks. The engine's design emphasizes reduced emissions, which aligns with current environmental standards, making it both efficient and eco-friendly. Its ability to handle a wide range of materials, from small branches to larger logs, makes it a versatile tool for any outdoor project.

The chainsaw features an automatic oiler system, ensuring that the chain remains well-lubricated during operation. This prolongs the life of both the chain and the guide bar, reducing maintenance requirements and downtime. The easy-access air filter enhances engine efficiency by allowing debris to be removed quickly, ensuring that the tool operates at peak performance.

In terms of ease of use, the Poulan 530164817 is designed with the user in mind. It features an ergonomic handle that provides a comfortable grip, reducing fatigue during extended use. Additionally, the chainsaw is equipped with a primer bulb, allowing for easy starting, even in cold weather conditions. The tensioning system for the chain is also user-friendly, allowing for quick adjustments without the need for additional tools.

Safety is a critical aspect of any power tool, and the Poulan 530164817 incorporates several features to protect the user. It includes a chain brake, which can be activated in case of kickback, providing an essential layer of safety. The integrated safety throttle prevents accidental starts, further enhancing the user's protection while operating the chainsaw.

Overall, the Poulan 2004-06, model 530164817, is a well-rounded chainsaw that marries power with practicality. Its robust engine, automatic oiler, and user-centric design make it an excellent choice for anyone who needs a reliable cutting tool for both light-duty and medium-duty tasks. Whether tackling yard maintenance, firewood preparation, or other woodworking projects, this chainsaw delivers dependable performance and longevity, making it a smart investment for any home or garden enthusiast.
Top Page Image Contents