Poulan 2002-06 Operate Your SAW Safely, Maintain Your SAW in Good Working Order, Kickback

Page 3

SCarefully plan your sawing operation in ad- vance. Do not start cutting until you have a clear work area, secure footing, and, if you are felling trees, a planned retreat path.

OPERATE YOUR SAW SAFELY

SDo not operate a chain saw with one hand. Serious injury to the operator, helpers, by- standers or any combination of these per- sons may result from one-handed opera- tion. A chain saw is intended for two-handed use.

SOperate the chain saw only in a well-venti- lated outdoor area.

SDo not operate saw from a ladder or in a

tree.

SMake sure the chain will not make contact with any object while starting the engine.

Never try to start the saw when the guide bar is in a cut.

SDo not put pressure on the saw at the end of the cut. Applying pressure can cause

you to lose control when the cut is com- pleted.

S Stop the engine before setting the saw down.

SDo not operate a chain saw that is dam- aged, improperly adjusted, or not com- pletely and securely assembled. Always replace bar, chain, hand guard, or chain brake immediately if it becomes damaged,

broken or is otherwise removed.

S With the engine stopped, hand carry the chain saw with the muffler away from your body, and the guide bar and chain to the rear, preferably covered with a scabbard.

MAINTAIN YOUR SAW IN GOOD WORKING ORDER

SHave all chain saw service performed by a qualified service dealer with the exception of the items listed in the maintenance sec- tion of this manual. For example, if improp- er tools are used to remove or hold the fly- wheel when servicing the clutch, structural damage to the flywheel can occur and

cause the flywheel to burst.

SMake certain the saw chain stops moving when the throttle trigger is released. For correction, refer to CARBURETOR AD-

JUSTMENTS.

SNever modify your saw in any way.

SKeep the handles dry, clean, and free of oil or fuel mixture.

SKeep fuel and oil caps, screws, and fas-

teners securely tightened.

S Use only PoulanR accessories and re- placement parts as recommended.

HANDLE FUEL WITH CAUTION

SDo not smoke while handling fuel or while operating the saw.

SEliminate all sources of sparks or flame in the areas where fuel is mixed or poured. There should be no smoking, open flames,

or work that could cause sparks. Allow en- gine to cool before refueling.

S Mix and pour fuel in an outdoor area on bare ground; store fuel in a cool, dry, well ventilated place; and use an approved,

marked container for all fuel purposes. Wipe up all fuel spills before starting saw.

SMove at least 10 feet (3 meters) from fuel-

ing site before starting engine.

STurn the engine off and let saw cool in a non-combustible area, not on dry leaves, straw, paper, etc. Slowly remove fuel cap

and refuel unit.

SStore the unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

KICKBACK

WARNING: Avoid kickback which can result in serious injury. Kickback is the backward, upward or sudden forward motion of the guide bar occurring when the saw chain near the upper tip of the guide bar con- tacts any object such as a log or branch, or when the wood closes in and pinches the saw chain in the cut. Contacting a foreign ob- ject in the wood can also result in loss of chain saw control.

SRotational Kickback can occur when the moving chain contacts an object at the up- per tip of the guide bar. This contact can cause the chain to dig into the object, which stops the chain for an instant. The result is a lightning fast, reverse reaction which kicks the guide bar up and back to- ward the operator.

SPinch-Kickbackcan occur when the the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar and the saw chain is suddenly stopped. This sudden stopping of the chain results in a reversal of the chain force used to cut wood and causes the saw to move in the opposite direction of the chain rotation. The saw is driven straight back toward the operator.

SPull-Incan occur when the moving chain contacts a foreign object in the wood in the cut along the bottom of the guide bar and the saw chain is suddenly stopped. This sudden stopping pulls the saw forward and away from the operator and could easily cause the operator to lose control of the saw.

Avoid Pinch-Kickback:

S Be extremely aware of situations or ob- structions that can cause material to pinch the top of or otherwise stop the chain.

SDo not cut more than one log at a time.

S Do not twist the saw as the bar is with- drawn from an undercut when bucking.

Avoid Pull-In:

SAlways begin cutting with the engine at full speed and the saw housing against wood.

S Use wedges made of plastic or wood. Never use metal to hold the cut open.

Kickback Path

3

Image 3
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionLocked Kickback Safety FeaturesReduce the Chance Kickback Maintain ControlChain Brake and CKA Angle Attaching the BAR & Chain If not Computed kickback angle CKA TableAdjusting the tension Chain Brake Nuts Guide Bar Adjusting Screw -- 1/4 TurnRecheck chain tension Chain Brake Nuts Throttle Lockout ON/STOP SwitchKnow Your SAW Throttle TriggerFueling Engine BAR and Chain LubricationImportant Points to Remember Inertia activating function control Starting a Warm EngineDifficult Starting or starting a flooded engine Braking function control Caution The chain brake must beTree Felling Techniques Felling Large TreesNotch CUT and Felling the Tree Bucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingAIR Filter PruningLimbing and Pruning Important Points LimbingChain Sharpening Carburetor AdjustmentsBAR Maintenance Inspect Muffler and Spark Arresting ScreenTrouble Cause Remedy Need Service PART?Contact your authorized service dealer Need ASSISTANCE?Agency, Environment Canada and POU Consequential Damages Poulan

2002-06, 530088310 specifications

The Poulan 2002-06,530088310 is a noteworthy chainsaw model that has garnered attention for its robust features, cutting-edge technologies, and user-friendly design. As part of the Poulan brand, well-known for its dedication to outdoor power equipment, this chainsaw showcases engineering excellence tailored for both amateur and professional users.

One of the defining characteristics of the Poulan 2002-06,530088310 is its impressive engine performance. It is equipped with a reliable two-stroke engine that delivers strong power for various cutting tasks, from firewood preparation to tree trimming. The engine's efficiency not only ensures reduced fuel consumption but also lowers emissions, aligning with modern environmental standards.

In terms of design, the chainsaw is engineered with an ergonomic handle that enhances comfort during extended use. The handle's design minimizes vibrations, which reduces user fatigue and increases overall control while operating the chainsaw. This thoughtful engineering makes it suitable for long hours of work without compromising on comfort or safety.

The Poulan 2002-06,530088310 incorporates advanced safety features that are critical for users, especially those who are less experienced. The chainsaw is equipped with a chain brake system that automatically engages in case of kickback, significantly reducing the risk of injury. Additionally, a hand guard is included to protect users' hands from falling debris, promoting safer operation in challenging environments.

Another notable feature is the tool-less chain adjustment system. This innovation allows users to quickly and easily adjust the chain tension without the need for additional tools. This convenience is particularly beneficial in the field, where efficiency is paramount. Moreover, the chainsaw features an easy-access air filter and spark plug, simplifying maintenance and ensuring optimal performance over time.

The Poulan 2002-06,530088310 also showcases a lightweight design that contributes to its versatility. Weighing in at an impressive value, this chainsaw is easy to maneuver, making it an excellent choice for various tasks, ranging from light pruning to more demanding cutting jobs.

Overall, the Poulan 2002-06,530088310 combines powerful performance, user-friendly features, and essential safety technologies, making it a reliable choice for both novice and seasoned users in the realm of outdoor cutting tools. Whether you're maintaining your yard or tackling larger projects, this chainsaw delivers the quality and efficiency needed to get the job done effectively.