Poulan 545001484 Cutting a Fallen Tree, Types of Cutting Used for Bucking, Treat path

Page 12

SAs tree starts to fall, stop saw, put it down, and get away quickly on your planned re-

treat path.

SDO NOT cut down a partially fallen tree with your saw. Be extremely cautious with partially fallen trees that may be poorly supported. When a tree doesn’t fall com- pletely, set the saw aside and pull down the tree with a cable winch, block and tackle, or tractor.

CUTTING A FALLEN TREE

(BUCKING)

Bucking is the term used for cutting a fallen tree to the desired log size.

WARNING: Do not stand on the log being cut. Any portion can roll causing loss of footing and control. Do not stand downhill of the log being cut.

IMPORTANT POINTS

SCut only one log at a time.

SCut shattered wood very carefully; sharp pieces of wood could be flung toward oper- ator.

SUse a sawhorse to cut small logs. Never allow another person to hold the log while cutting and never hold the log with your leg or foot.

SDo not cut in an area where logs, limbs, and roots are tangled such as in a blown down area. Drag the logs into a clear area before cutting by pulling out exposed and cleared logs first.

TYPES OF CUTTING USED FOR BUCKING

WARNING: If saw becomes pinched or hung in a log, don’t try to force it out. You can lose control of the saw resulting in injury and/or damage to the saw. Stop the saw, drive a wedge of plastic or wood into the cut until the saw can be removed easily. Re- start the saw and carefully reenter the cut. To avoid kickback and chain damage, do not use a metal wedge. Do not attempt to restart your saw when it is pinched or hung in a log.

Use a wedge to remove pinched saw

Turn saw OFF and use a plastic or wooden wedge to force cut open.

Overcutting begins on the top side of the log with the bottom of the saw against the log. When overcutting use light downward pres- sure.

Overcutting

Undercutting

Undercutting involves cutting on the under- side of the log with top of saw against the log. When undercutting use light upward pres- sure. Hold saw firmly and maintain control. The saw will tend to push back toward you.

WARNING: Never turn saw upside down to undercut. The saw cannot be con- trolled in this position.

Always make your first cut on the compres- sion side of the log. The compression side of the log is where the pressure of the log’s weight is concentrated.

First cut on compression side of log

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A SUPPORT

SOvercut through 1/3 of the diameter of the log.

SRoll the log over and finish with a second

overcut.

SWatch for logs with a compression side to prevent the saw from pinching. See il- lustrations for cutting logs with a compres- sion side.

BUCKING USING A LOG OR

SUPPORT STAND

SRemember your first cut is always on the compression side of the log.

(Refer to the illustrations below for your first and second cut)

S Your first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents English Español Français Electrolux Home Products, Inc22/05 Identification of Symbols Safety RulesPlan Ahead Operate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackKickback Safety Features Reduce the Chance of KickbackMaintain Control Chain Brake and CKA Angle Front Hand Guard, designed to reduceBack toward the operator BH2160 952044370Assembly Inside view Chain Brake Adjustment located on Chain BrakeAttaching the BAR & Chain If not Chain Brake NutsAdjusting the tension Checking the tensionChain Tension ON/STOP Switch Know Your Chain SAWThrottle Trigger Throttle LOCK-OUTStarting Fueling EngineBAR and Chain Lubrication Important Points to RememberCutting Methods Starting a Warm EngineImportant Points Tree Felling Techniques Felling Large Trees Notch CUT and Felling the TreeInches in diameter or larger FootingBucking Using a LOG or Support Stand Cutting a Fallen TreeTypes of Cutting Used for Bucking Bucking Without a SupportService Limbing and Pruning Important PointsLimbing PruningCleaning the Spark ARREST- ING Screen Carburetor AdjustmentBAR Maintenance Inspect Muffler and Spark Arresting ScreenNeed ASSISTANCE? Limited Warranty Load Adjustment EngineEmpty fuel tank and refill with Ligations The U. S. Environmental Electrolux Home PRODUCTS, INCIntermediate 125 hours Extended 300 hours

545001484 specifications

The Poulan 545001484 is a powerful and efficient chainsaw designed for both professional and home use. Renowned for its robust performance, this model is ideal for pruning, cutting firewood, and tackling various outdoor projects. The chainsaw boasts a lightweight construction, enabling users to operate it for extended periods without experiencing excessive fatigue.

One of the standout features of the Poulan 545001484 is its reliable 50cc two-cycle engine. This high-performance engine provides ample power to cut through thick branches and logs, ensuring efficiency in various cutting tasks. The chainsaw's air injection system is another noteworthy technology that enhances its performance by keeping the air filter cleaner for longer, reducing downtime for maintenance. This means users can focus on their work, knowing they won’t have to clean or replace the filter frequently.

The design of the Poulan 545001484 incorporates a 18-inch bar and chain, striking a balance between agility and the ability to tackle larger cuts. This length allows for smooth cutting while still being manageable for users of various skill levels. Additionally, the chainsaw features an automatic oiler, ensuring that the bar and chain are properly lubricated during operation, which extends the life of both components and promotes cutting efficiency.

Safety is paramount in chainsaw design, and the Poulan 545001484 does not compromise in this area. It comes equipped with features such as a chain brake, which stops the chain immediately in case of kickback, enhancing user protection. The cushioned, ergonomic handle aids in reducing vibrations during use, further increasing comfort and control for the operator.

Easy maintenance is another appealing aspect of the Poulan 545001484. The tool-less chain tensioning system allows users to adjust the chain quickly and easily without needing additional tools, which is particularly beneficial during long cutting sessions. Overall, the Poulan 545001484 combines power, efficiency, and user-friendly design, making it a preferred option for anyone in need of a reliable and versatile chainsaw for various outdoor tasks. Its innovative features cater to experienced users while remaining accessible for novices, ensuring it stands out in a competitive market.
Top Page Image Contents