Poulan 530165399 Throttle LOCK-OUT Chain Brake, CHOKE/FAST Idle Lever, Primer Bulb

Page 9

THROTTLE LOCK-OUT

CHAIN BRAKE

 

 

The THROTTLE LOCK--OUT must be

The chain brake is a device designed to stop

pressed before you can squeeze the throttle

the chain if kickback occurs. The chain brake

trigger. This feature prevents you from acci-

activates automatically in the event of kick-

dentally squeezing the trigger.

back. The chain brake activates manually if the

CHOKE/FAST IDLE LEVER

front hand guard is pushed forward. The chain

The choke and fast idle are set by pulling the

brake is disengaged by pulling the front hand

guard back toward the front handle as far as

CHOKE/FAST IDLE LEVER out to the full ex-

possible.

 

 

 

tent for cold starting or after refueling. The

 

 

 

 

 

 

 

choke provides additional fuel to the engine

CHAIN TENSION

 

 

during cold starting.

It is normal for a new chain to stretch during the

PRIMER BULB

first 15 minutes of operation. You should check

The PRIMER BULB circulates fuel to the car-

your chain tension frequently. See CHAIN

buretor to provide quicker starting.

TENSION under the ASSEMBLY section.

 

 

 

 

 

 

 

WARNING: Muffler is very hot during

In freezing weather oil will thicken, making it

necessary to thin bar and chain oil with a

and after use. Do not touch the muffler or al-

small amount (5 to 10%) of #1 Diesel Fuel or

low combustible material such as dry grass

kerosene.

Bar and chain oil must be free

or fuel to do so.

flowing for the oil system to pump enough oil

BEFORE STARTING ENGINE

for adequate lubrication.

 

 

 

 

 

Genuine Poulan PROR bar and chain oil is

WARNING: Be sure to read the fuel

recommended to protect your unit against ex-

handling information in the safety rules sec-

cessive wear from heat and friction. Poulan

PROR oil resists high temperature thinning.

tion of this manual before you begin. If you do

If Poulan PROR bar and chain oil is not

not understand the fuel handling information

do not attempt to fuel your unit. Seek help

available, use a good grade SAE 30 oil.

 

 

from someone that does understand the in-

S Never use waste oil for bar and chain lubri-

formation or call the customer assistance

cation.

 

 

 

help line at 1-800-554-6723.

S Always stop the engine before removing

FUELING ENGINE

the oil cap.

 

 

WARNING: Remove fuel cap slowly

IMPORTANT

 

 

Experience indicates that alcohol--blended

when refueling.

fuels (called gasohol or using ethanol or meth-

 

HELPFUL TIP

 

anol) can attract moisture which leads to sepa-

 

 

ration and formation of acids during storage.

 

To obtain the correct oil mix

 

Acidic gas can damage the fuel system of an

 

ratio, pour 3.2 ounces of

 

engine while in storage. To avoid engine prob-

 

2-cycle synthetic oil into

 

lems, the fuel system should be emptied before

 

one gallon of fresh gas.

 

storage for 30 days or longer. Drain the gas

This engine is certified to operate on un-

tank, start the engine and let it run until the fuel

leaded gasoline. Before operation, gasoline

lines and carburetor are empty. Use fresh fuel

must be mixed with a good quality synthetic

next season. See STORAGE section for addi-

2-cycle air-cooled engine oil designed to be

tional information.

 

 

mixed at a ratio of 40:1. Poulan/Weed Eater

CHAIN BRAKE

 

 

brand synthetic oil is recommended. A 40:1

Ensure chain brake is disengaged by pulling

ratio is obtained by mixing 3.2 ounces (95 ml)

the front hand guard back toward the front han-

of oil with 1 gallon (4 liters) of unleaded gaso-

dle as far as possible. The chain brake must be

line. Included with this saw is a 3.2 ounce (95

disengaged before cutting with the saw.

 

 

ml) container of Poulan/Weed Eater brand syn-

 

 

 

 

thetic

oil. Pour the entire contents of this con-

WARNING: The chain must

not

tainer

into 1 gallon (4 liters) of gasoline to

move when the engine runs at idle speed. If

achieve the proper fuel mixture.

the chain moves at idle speed refer to CAR-

DO NOT USE automotive or marine oil.

BURETOR

ADJUSTMENT within

this

These oils will cause engine damage. When

manual. Avoid contact with the muffler. A hot

mixing fuel follow the instructions printed on

muffler can cause serious burns.

 

 

the container. Always read and follow the

 

 

 

 

safety

rules listed under HANDLE FUEL

To stop the engine move the ON/STOP

WITH CAUTION.

switch to the STOP position.

 

 

BAR AND CHAIN LUBRICATION

 

 

 

 

 

 

The bar and chain require continuous lubri-

To start the engine hold the saw firmly on the

cation. Lubrication is provided by the auto-

ground as illustrated. Make sure the chain is

matic oiler system when the oil tank is kept

free to turn without contacting any object.

filled. Lack of oil will quickly ruin the bar and

 

chain. Too little oil will cause overheating

 

shown by smoke coming from the chain and/

 

or discoloration of the bar.

 

 

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 12/8/05 530165399Starting Reminder Plan AheadTions found in this manual Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InChain Brake and CKA Angle Kickback Safety FeaturesChain saws as set by Ansi B175.1 If your hand slips off the front handlebarAttaching the BAR & Chain If not AssemblyAdjusting the tension Chain TensionChecking the tension Operation ON/STOP Switch Throttle TriggerKnow Your Chain SAW ON/STOPCHOKE/FAST Idle Lever Throttle LOCK-OUT Chain BrakePrimer Bulb Before Starting EngineStarting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Right Foot Through Rear HandleInertia activating function control Braking function control Caution The chain brake must beOperating Tips Tree Felling TechniquesNotch CUT and Felling the Tree Felling Large TreesCutting a Fallen Tree Important PointsBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points LimbingService Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelStorage Engine Load Adjustment EngineOther Empty fuel tank and refill withElectrolux Home PRODUCTS, INC Tions The U.S. Environmental ProtectionConsequential Damages Electro

530165399 specifications

The Poulan 530165399 is a high-performance chainsaw designed for both professional and home use, offering a blend of power, versatility, and user-friendly features. This model stands out for its ergonomic design, making it comfortable for extended use while minimizing user fatigue. It has a sturdy build, which ensures durability and resilience in demanding conditions.

One of the key features of the Poulan 530165399 is its powerful engine. It is equipped with a robust 42cc two-stroke engine that provides ample cutting power, making it suitable for various applications, from pruning trees to felling larger ones. The engine is designed for efficient fuel consumption, allowing users to maximize their operational time without frequent refueling.

A notable technology integrated into the Poulan 530165399 is the Easy Start feature, which allows for effortless ignition. This user-friendly technology is especially beneficial for those who may struggle with traditional starting methods. Additionally, the chainsaw features an automatic oiler system that ensures the chain remains lubricated during operation. This not only extends the life of the chain but also enhances cutting performance.

The chainsaw comes with a 16-inch bar and chain, providing an ideal balance between maneuverability and cutting capacity. Whether tackling thick branches or smaller logs, the Poulan 530165399 excels at delivering precise cuts. Furthermore, the chain tensioning system is designed for quick adjustments, allowing users to maintain optimal chain tension without the need for extra tools.

Safety is paramount in chainsaw design, and the Poulan 530165399 addresses this with features such as a wrap-around front handle and a chain brake. These components provide excellent control and protection against kickback, making it a safer choice for users at all skill levels.

In terms of maintenance, the Poulan 530165399 is engineered for ease of care. The air filter is easily accessible for cleaning or replacement, which helps maintain engine performance over time.

Overall, the Poulan 530165399 is a versatile chainsaw that combines power, safety, and convenience. Its features and technologies make it an excellent choice for anyone looking to handle outdoor cutting tasks efficiently. Whether you are a seasoned professional or a novice DIYer, this chainsaw can meet a wide range of cutting needs with reliability and ease.
Top Page Image Contents