Poulan 530165399 instruction manual Chain Tension, Checking the tension, Adjusting the tension

Page 7

Inside view of clutch cover

Adjustment located on clutch cover

4.Turn the adjusting screw by hand coun- terclockwise until the adjusting pin just touches the stop. This should allow the pin to be near the correct position.

5.Slide guide bar on bar bolts until guide bar stops against clutch drum sprocket.

Bar bolts

Guide bar

6.Carefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Cutters

Depth Gauge

Drive Links

7.Place chain over and behind clutch re- tainer, fitting the drive links in the clutch drum sprocket.

8.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

9.Fit chain drive links into bar groove.

10.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

11.Now, install clutch cover making sure the adjusting pin is positioned in the low- er hole in the guide bar. Remember this pin moves the bar forward and back- ward as the screw is turned.

Clutch

Cover

Adjusting Pin Lower

Hole

Guide Bar

12.Install bar nuts and finger tighten only. Once the chain is tensioned, you will need to tighten bar nuts.

CHAIN TENSION

(Including units with chain already installed)

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move chain around guide bar. If the chain does not rotate, it is too tight. If the chain is too loose, it will sag below the bar.

Guide

Bar

Chain Adjustmen

Bar Nuts Adjusting Tool

Screw (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chains stretch during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

1.Loosen bar nuts until they are finger tight against the clutch cover.

2.Turn adjusting screw clockwise until chain solidly contacts bottom of guide bar rail.

Adjusting

Screw

7

Image 7
Contents 12/8/05 530165399Plan Ahead Starting ReminderTions found in this manual Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionAvoid Pull-In Reduce the Chance of KickbackMaintain Control Avoid Pinch-KickbackIf your hand slips off the front handlebar Kickback Safety FeaturesChain Brake and CKA Angle Chain saws as set by Ansi B175.1Attaching the BAR & Chain If not AssemblyChain Tension Adjusting the tensionChecking the tension ON/STOP ON/STOP Switch Throttle TriggerOperation Know Your Chain SAWBefore Starting Engine Throttle LOCK-OUT Chain BrakeCHOKE/FAST Idle Lever Primer BulbRight Foot Through Rear Handle Important Points to RememberStarting a Warm Engine Difficult Starting or starting a flooded engineTree Felling Techniques Braking function control Caution The chain brake must beInertia activating function control Operating TipsImportant Points Felling Large TreesNotch CUT and Felling the Tree Cutting a Fallen TreeLimbing Bucking Using a LOG or Support StandBucking Without a Support Limbing and Pruning Important PointsService Check Fuel Mixture Level Inspect and Clean Unit and DecalsClean AIR Filter Cleaning the Spark ARREST- ING ScreenStorage Empty fuel tank and refill with Load Adjustment EngineEngine OtherElectrolux Home PRODUCTS, INC Tions The U.S. Environmental ProtectionConsequential Damages Electro

530165399 specifications

The Poulan 530165399 is a high-performance chainsaw designed for both professional and home use, offering a blend of power, versatility, and user-friendly features. This model stands out for its ergonomic design, making it comfortable for extended use while minimizing user fatigue. It has a sturdy build, which ensures durability and resilience in demanding conditions.

One of the key features of the Poulan 530165399 is its powerful engine. It is equipped with a robust 42cc two-stroke engine that provides ample cutting power, making it suitable for various applications, from pruning trees to felling larger ones. The engine is designed for efficient fuel consumption, allowing users to maximize their operational time without frequent refueling.

A notable technology integrated into the Poulan 530165399 is the Easy Start feature, which allows for effortless ignition. This user-friendly technology is especially beneficial for those who may struggle with traditional starting methods. Additionally, the chainsaw features an automatic oiler system that ensures the chain remains lubricated during operation. This not only extends the life of the chain but also enhances cutting performance.

The chainsaw comes with a 16-inch bar and chain, providing an ideal balance between maneuverability and cutting capacity. Whether tackling thick branches or smaller logs, the Poulan 530165399 excels at delivering precise cuts. Furthermore, the chain tensioning system is designed for quick adjustments, allowing users to maintain optimal chain tension without the need for extra tools.

Safety is paramount in chainsaw design, and the Poulan 530165399 addresses this with features such as a wrap-around front handle and a chain brake. These components provide excellent control and protection against kickback, making it a safer choice for users at all skill levels.

In terms of maintenance, the Poulan 530165399 is engineered for ease of care. The air filter is easily accessible for cleaning or replacement, which helps maintain engine performance over time.

Overall, the Poulan 530165399 is a versatile chainsaw that combines power, safety, and convenience. Its features and technologies make it an excellent choice for anyone looking to handle outdoor cutting tasks efficiently. Whether you are a seasoned professional or a novice DIYer, this chainsaw can meet a wide range of cutting needs with reliability and ease.