Poulan 530087390 Bucking Without a Support, Bucking Using a LOG or Support Stand, Limbing

Page 12

Overcutting Undercutting

Undercutting involves cutting on the un- derside of the log with top of saw against the log. When undercutting use light up- ward pressure. Hold saw firmly and main- tain control. The saw will tend to push back toward you.

WARNING: Never turn saw upside down to undercut. The saw cannot be controlled in this position.

Always make your first cut on the com- pressions side of the log. The compres- sion side of the log is where the pressure of the log’s weight is concentrated.

First cut on compression side of log

1st Cut

2nd Cut

Using a support stand

2nd Cut

 

 

 

 

1st Cut

1st Cut

2nd Cut

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A SUPPORT

S Overcut through 1/3 of the diameter of the log.

SRoll the log over and finish with a sec- ond overcut.

SWatch for logs with a compression side to prevent the saw from pinching. See il- lustration above for cutting logs with a compression side.

BUCKING USING A LOG OR

SUPPORT STAND

S Remember your first cut is always on the compression side of the log. (Refer to the illustration below for your first and second cut)

S Your first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

Using a log for support

2nd Cut

1st Cut

12

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the mov- ing chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on lad- ders, platforms, a log, or in any position which can cause you to lose your bal- ance or control of the saw.

IMPORTANT POINTS

SWatch out for spring poles. Spring poles are small size limbs which can whip to- ward you or pull you off balance. Use extreme caution when cutting small size

limbs.

S Be alert for spring back from any branches that are bent or under pres- sure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SLimb a tree only after it is cut down.

S Leave the larger limbs underneath the felled tree to support the tree as you work.

S Start at the base of the felled tree and work toward the top, cutting branches and limbs. Remove small limbs with one cut.

SKeep tree between you and the chain.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Operate Your SAW SafelyMaintain Your SAW in Good Working Order Electrical Safety Keep oil cap and fasteners securely tightenedMaintain chain saw with care PipesGuard Against Kickback Rotational Kickback can occur whenReduce the Chance Kickback Avoid Pinch-KickbackKickback Safety Features Maintain ControlShoulder height Chain Brake and CKA AngleSively upon safety devices built into your saw Rapidly back towards the operatorDouble Insulation Construction Attaching the BAR and Chain if not already attached Remove the plastic shipping spacer if presentTrigger Switch Chain Adjustment ScrewKnow Your SAW Trigger LOCK-OUT ButtonPower Cord Chain TensionOperating Instructions Attach the Extension Cord to Your Chain SAWBraking function control Inertia activating function controlOperating Tips Tree Felling TechniquesFelling Large Trees Notch CUT and Felling TreeCutting a Fallen Tree Bucking Important PointsBucking Using a LOG or Support Stand Bucking Without a SupportLimbing and Pruning Important Points LimbingPruning Customer ResponsibilitiesGeneral Recommendations Check for Damaged or Worn PartsUnplug unit from the power source Check Chain TensionCheck Chain Sharpness Check Guide BARInspect and Clean Unit and Labels Chain ReplacementLubrication Chain SharpeningChain Adjustment Customer Serviceable PartsSeasonal Storage Switch is Trigger switch failure Trouble Cause RemedyRepair or replace Sprocket wornElectrolux Home Products Electrolux Home PRODUCTS, INC

530087390 specifications

The Poulan 530087390 is a powerful and reliable chainsaw designed for both professional and recreational use, making it a fantastic choice for homeowners and landscapers alike. Known for its robust performance and user-friendly features, this chainsaw excels at tackling a variety of tasks, including cutting firewood, felling trees, and trimming branches.

One of the standout features of the Poulan 530087390 is its impressive engine. Equipped with a potent 42cc 2-cycle engine, this chainsaw delivers ample power for demanding cutting tasks while maintaining an efficient fuel consumption rate. The engine is specifically designed to provide reliable starting and smooth operation, ensuring that users can start their work with minimal hassle.

The Poulan 530087390 utilizes an advanced air filter system that enhances engine longevity and performance. This technology helps in reducing debris intake, resulting in cleaner air and better combustion. Additionally, the chainsaw incorporates an automatic oiling system that ensures the chain remains properly lubricated throughout operation, leading to reduced wear and enhanced cutting efficiency.

This chainsaw features a 16-inch bar and chain, striking a perfect balance between maneuverability and cutting capacity. The size makes it suitable for a range of tasks, from light pruning to medium-sized tree cutting, while the low-kickback chain design enhances safety during operation.

User comfort is also a priority in the design of the Poulan 530087390. The chainsaw is equipped with an ergonomic handle and anti-vibration technology, which helps reduce user fatigue during extended use. These features ensure that the chainsaw can be operated comfortably for longer periods, making it an ideal tool for both DIY enthusiasts and professionals alike.

In terms of safety, the Poulan 530087390 is equipped with essential safety features, including a chain brake that can be activated in case of kickback. This feature provides peace of mind for users, assuring them that safety is a primary concern in the design of this equipment.

Overall, the Poulan 530087390 stands out in the market due to its combination of power, efficiency, and user-friendly features. Whether tackling heavy-duty tasks or simple yard maintenance, this chainsaw provides dependable performance and exceptional value for money, making it a preferred choice among users who demand quality and reliability.
Top Page Image Contents