Poulan 530087390 Check Chain Tension, Unplug unit from the power source, Check Chain Sharpness

Page 14

CHECK CHAIN TENSION

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use your saw.

DUnplug unit from the power source.

D Use a screwdriver to move chain around guide bar to ensure kinks do not exist. The chain should rotate freely.

DLoosen bar clamp nuts until they are fin- ger tight against the bar clamp.

DTurn the adjusting screw clockwise until the chain solidly contacts bottom of guide bar rail. Then, turn adjusting screw an additional 1/4 turn.

Adjusting Screw -- 1/4 Turn

CHECK CHAIN SHARPNESS

A sharp chain makes wood chips. A dull chain makes a sawdust powder and cuts slowly. See CHAIN SHARPENING in the SERVICE AND ADJUSTMENTS section.

CHECK GUIDE BAR

Conditions which require guide bar main- tenance:

SSaw cuts to one side or at an angle. S Saw has to be forced through the cut. S Inadequate supply of oil to the bar and

chain.

Check the condition of the guide bar each time the chain is sharpened. A worn guide bar will damage the chain and make cut- ting difficult.

After each use, with unit disconnected from power source, clean all sawdust from the guide bar and sprocket hole.

To maintain guide bar:

S Disconnect the chain saw from the pow- er source.

S Loosen and remove bar clamp nuts. Remove bar and chain from saw.

S Clean the oil holes and bar groove after each 5 hours of operation.

Remove Sawdust From

Guide Bar Groove

NOTE: To tighten the chain, turn the ad- justing screw clockwise; to loosen the chain, turn the adjusting screw counter- clockwise.

Adjusting Screw

D Check the tension by lifting the chain from the guide bar. Remove some of the stiffness in the chain by pulling down and letting go of the chain several times.

D Continue turning the adjusting screw until the tension is correct.

DTighten bar clamp nuts with a wrench. D Recheck chain tension.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious in- jury.

14

Sprocket Hole

Oil Holes

SAdd lubricant to sprocket hole after each

use.

S Burring of guide bar rails is a normal process of rail wear. Remove these burrs with a flat file.

SWhen rail top is uneven, use a flat file to restore square edges and sides.

File Rail Edges

and Sides

Square

Worn Groove

Correct Groove

Replace the guide bar when the groove is worn, the guide bar is bent or crack--ed, or when excess heating or burring of the rails occurs. If replacement is necessary, use only the guide bar specified for your saw in the repair parts list or on the decal located on the chain saw.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Manual de Instrucciones Manuel d’Instructions Maintain Your SAW in Good Working Order Plan AheadOperate Your SAW Safely Maintain chain saw with care Electrical SafetyKeep oil cap and fasteners securely tightened PipesReduce the Chance Kickback Guard Against KickbackRotational Kickback can occur when Avoid Pinch-KickbackShoulder height Kickback Safety FeaturesMaintain Control Chain Brake and CKA AngleDouble Insulation Construction Sively upon safety devices built into your sawRapidly back towards the operator Attaching the BAR and Chain if not already attached Remove the plastic shipping spacer if presentKnow Your SAW Trigger SwitchChain Adjustment Screw Trigger LOCK-OUT ButtonOperating Instructions Power CordChain Tension Attach the Extension Cord to Your Chain SAWOperating Tips Braking function controlInertia activating function control Tree Felling TechniquesCutting a Fallen Tree Bucking Felling Large TreesNotch CUT and Felling Tree Important PointsLimbing and Pruning Important Points Bucking Using a LOG or Support StandBucking Without a Support LimbingGeneral Recommendations PruningCustomer Responsibilities Check for Damaged or Worn PartsCheck Chain Sharpness Unplug unit from the power sourceCheck Chain Tension Check Guide BARLubrication Inspect and Clean Unit and LabelsChain Replacement Chain SharpeningSeasonal Storage Chain AdjustmentCustomer Serviceable Parts Repair or replace Switch is Trigger switch failureTrouble Cause Remedy Sprocket wornElectrolux Home Products Electrolux Home PRODUCTS, INC

530087390 specifications

The Poulan 530087390 is a powerful and reliable chainsaw designed for both professional and recreational use, making it a fantastic choice for homeowners and landscapers alike. Known for its robust performance and user-friendly features, this chainsaw excels at tackling a variety of tasks, including cutting firewood, felling trees, and trimming branches.

One of the standout features of the Poulan 530087390 is its impressive engine. Equipped with a potent 42cc 2-cycle engine, this chainsaw delivers ample power for demanding cutting tasks while maintaining an efficient fuel consumption rate. The engine is specifically designed to provide reliable starting and smooth operation, ensuring that users can start their work with minimal hassle.

The Poulan 530087390 utilizes an advanced air filter system that enhances engine longevity and performance. This technology helps in reducing debris intake, resulting in cleaner air and better combustion. Additionally, the chainsaw incorporates an automatic oiling system that ensures the chain remains properly lubricated throughout operation, leading to reduced wear and enhanced cutting efficiency.

This chainsaw features a 16-inch bar and chain, striking a perfect balance between maneuverability and cutting capacity. The size makes it suitable for a range of tasks, from light pruning to medium-sized tree cutting, while the low-kickback chain design enhances safety during operation.

User comfort is also a priority in the design of the Poulan 530087390. The chainsaw is equipped with an ergonomic handle and anti-vibration technology, which helps reduce user fatigue during extended use. These features ensure that the chainsaw can be operated comfortably for longer periods, making it an ideal tool for both DIY enthusiasts and professionals alike.

In terms of safety, the Poulan 530087390 is equipped with essential safety features, including a chain brake that can be activated in case of kickback. This feature provides peace of mind for users, assuring them that safety is a primary concern in the design of this equipment.

Overall, the Poulan 530087390 stands out in the market due to its combination of power, efficiency, and user-friendly features. Whether tackling heavy-duty tasks or simple yard maintenance, this chainsaw provides dependable performance and exceptional value for money, making it a preferred choice among users who demand quality and reliability.
Top Page Image Contents