Poulan 545137220 Blower Tube Assembly, Vacuum BAG Assembly, Vacuum Tube Assembly

Page 5

ASSEMBLY

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury. Always disconnect the spark plug before performing maintenance or ac- cessing movable parts.

WARNING: If you receive your unit assembled, check each step to insure your unit is properly assembled and all fasteners are secure. Follow all safety information in the manual and on the unit.

DA standard screwdriver is required for as- sembly.

BLOWER TUBE ASSEMBLY

1.Align the rib on the blower tube with the groove in the blower outlet; slide the tube into place.

NOTE: Knob must be loose enough to allow blower tube to be inserted in blower outlet. Loosen knob by turning counterclockwise.

Blower

Outlet Blower

Tube

Groove Rib

2.Secure the tube by turning the knob clock- wise.

3.To remove the tube, turn the knob counter- clockwise to loosen the tube; remove the tube.

VACUUM BAG ASSEMBLY

1.Open the zipper on the vacuum bag and insert the elbow tube.

2.Push the small end of the elbow tube through the small opening in the bag.

Elbow

TubeSmall

Opening

Zipper

OpeningRib

NOTE: Make sure edge of the small opening is flush against the flared area of the elbow tube, and the rib on the elbow tube is on the bottom.

3.Close the zipper on the bag. Make sure the zipper is closed completely.

4.Remove blower tube from engine.

Rib

Groove

5.Insert the elbow tube into the blower outlet. Make sure elbow tube rib is aligned with the blower outlet groove.

6.Turn knob clockwise to secure elbow tube.

VACUUM TUBE ASSEMBLY

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury.

1.Align the lower vacuum tube as shown. Push lower vacuum tube into upper vacu- um tube.

Upper Vacuum

Tube

Lower Vacuum Tube

2.Insert the tip of a screwdriver into the latch area of the vacuum inlet.

Latch

Blower

Outlet

Area

 

Latch Area

 

Vacuum

 

Inlet Cover

3.Gently tilt the handle of the screwdriver to- ward the back of the unit to release the latch while pulling up on the vacuum inlet cover with your other hand.

4.Hold the vacuum inlet cover open until up- per vacuum tube is installed.

Vacuum Inlet

Retaining Post

Vacuum

Inlet

Cover

-- 5 --

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Know Your Unit Safety RulesPlan Ahead Handle Fuel with CAUTION, IT is Highly FlammableMaintain Your Unit Properly Operate Your Unit SafelyBefore starting engine Store in a dry area out of reach of childrenBlower Tube Assembly AssemblyVacuum BAG Assembly Vacuum Tube AssemblyHook Retaining Post HOW to Convert Unit from Vacuum USE to Blower USEShoulder Strap Adjustment Operation To Stop the Engine Before Starting Engine Fueling EngineBefore Starting the Engine Blower VacuumMaintenance Storage Fuel System Troubleshooting Table Cause RemedyEngine OtherEPA/CALIFORNIA Emission Control Warranty Statement Limited WarrantyIntermediate 125 hours Extended 300 hours

545137220 specifications

The Poulan 545137220 is a powerful, versatile chainsaw designed for both homeowners and professionals who require reliable performance for cutting firewood, felling trees, and performing yard maintenance. This model stands out for its combination of innovative technologies, user-friendly design, and impressive specifications that cater to a wide range of outdoor cutting tasks.

One of the main features of the Poulan 545137220 is its potent engine, which typically boasts a displacement of around 50cc. This robust engine delivers an impressive amount of power, enabling users to tackle tougher jobs with ease. The chainsaw operates efficiently, ensuring that larger logs or trees can be cut through quickly and effectively.

Another significant characteristic of the Poulan 545137220 is its OxyPower engine technology. This innovative feature allows the chainsaw to use less fuel while producing fewer emissions compared to traditional 2-cycle engines. This not only benefits the environment but also reduces the cost of operation over time. The OxyPower technology enhances fuel efficiency without sacrificing performance, making it an ideal choice for environmentally-conscious users.

The chainsaw is equipped with a 20-inch bar, providing the perfect balance between reach and control. This bar length makes it suitable for cutting both larger and smaller trees, allowing for versatility in various cutting applications. The chain speed is designed to be fast enough to maximize efficiency while minimizing the effort required by the user.

Comfort and safety are also primary considerations in the design of the Poulan 545137220. It features an anti-vibration system that significantly reduces fatigue during prolonged use, allowing users to work longer without discomfort. The chainsaw is also fitted with a chain brake for added safety, ensuring that the chain stops moving in the event of kickback.

Another practical characteristic of this chainsaw is its easy-access air filter, which facilitates quick maintenance and enhances the overall lifespan of the tool. Users can expect durable construction, making it a reliable option for frequent and heavy use.

In summary, the Poulan 545137220 is a feature-rich chainsaw that combines power, efficiency, and user comfort. Its blend of cutting-edge technology, robust performance, and user-oriented design makes it an excellent choice for both occasional users and seasoned professionals looking for a dependable chainsaw.
Top Page Image Contents