hp psc 2200 series

1Press Setup.

2Press 5, then press 8.

This selects Maintenance, and then selects View Angle.

3Press Enter, press or until the text in the front-panel display appears as desired, then press Enter.

connect your hp psc to your computer

connect your usb port

Your HP PSC supports HOT Swapping, meaning you can connect to the HP PSC while the power is on at your computer and on the HP PSC.

We recommend using a USB cable that is 3 meters (9.8 feet) in length, or less.

Connecting your computer to your HP PSC with USB is straightforward. Simply plug one end of the USB cable into the back of your computer and the other in the back of the HP PSC.

what works

what does not work

 

 

Plugging into the USB port on your

Plugging into the USB port located

computer

on the keyboard

 

 

Plugging into a powered hub that is

Plugging into a non-powered USB

connected to the USB port on your

hub

computer

 

 

 

AppleTalk is not supported.

60

additional setup information

Page 66
Image 66
HP 2200 manual Connect your hp psc to your computer, Connect your usb port, What works What does not work