HP manual Geräuschemission VCCI-2 Japan Hp psc 2200 series

notice to users of the Irish telephone network

notice to users of the German telephone network

geräuschemission

VCCI-2 (Japan)

notice to Korean customers

hp psc 2200 series

Network compatibility depends on customer selected settings, which must be reset to use the equipment on a telephone network in a country other than where the product was purchased. Contact the vendor or Hewlett-Packard Company if addition product support is necessary.

This equipment has been certified by the manufacturer in accordance with Directive 1999/5/EC (annex II) for Pan-European single-terminal connection to the public switched telephone network (PSTN). However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

In the event of problems, you should contact your equipment supplier in the first instance.

This equipment is designed for DTMF tone dialing and loop disconnect dialing. In the unlikely event of problems with loop disconnect dialing, it is recommended to use this equipment only with the DTMF tone dial setting.

The HP 2200 Series products are designed to connect only to the analogue public- switched telephone network (PSTN). Please connect the TAE N telephone connector plug, provided with the hp psc 2200 series, into the wall socket (TAE 6) code N. The hp psc 2200 series products can be used as a single device and/or in combination (in serial connection) with other approved terminal equipment.

LpA < 70 dB am Arbeitsplatz im Normalbetrieb

nach DIN 45635 T. 19

regulatory notices 73