hp psc 2200 series
set the date and time
You can set the date and time from the front panel. When a fax is transmitted, the current date and time are printed along with the fax header. The date and time format is based upon the language and country setting.
Normally the computer software sets the date and time automatically.
1Press Setup.
2Press 3, then press 1.
This selects Basic Fax Setup, then selects Date and Time.
3Enter the month, day, and year (last two digits only) by pressing the appropriate number on the keypad.
The underline cursor presented initially beneath the first digit advances automatically to each digit after, each time you press a button. The time prompt automatically appears after you enter the last digit of the date.
4Enter the hours and minutes.
The AM/PM prompt automatically appears after the last digit of the time is entered.
5Press 1 for AM or 2 for PM.
The new time and date settings appear on the front panel.
set the fax header
We recommend that you use the Fax Setup Wizard during installation to set up the Fax Header. Follow these steps to enter your name and fax number.
In Hungary, the subscriber identification code (fax header) can be set or changed only by authorized personnel. For more information, contact your authorized HP dealer.
1Press Setup.
2Press 3, then press 2.
This selects Basic Fax Setup, then selects Fax Header.
3After Your Name appears, enter your name using the numeric keypad, as described in the next section, enter text, then press Enter.
4Using the keypad, enter your fax number.
5After you finish entering your fax number, press Enter.
set the date and time | 45 |
