Inspect and Clean Unit and Decals

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

CLEAN AIR FILTER

Air Filter

Fuel Line

Air Filter

Cover

Fuel Filter

CHECK MUFFLER MOUNTING

SCREWS

	Once each year, ensure muffler mounting
Screws	screws are secure and tightened properly to
	prevent damage.

Cleaning the air filter:

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean or replace air filter after every 5 hours of operation or yearly, whichever comes first.

1.Clean the cover and the area around it to keep debris from falling into the carburetor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Apply a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed, nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

Mounting

Screw

Muffler Cover				Holes
Muffler Cover

Screws

1.Loosen and remove the 2 screws from the muffler cover.

2.Remove the muffler cover.

3.Tighten the 2 muffler mounting screws se- curely.

4.Reinstall muffler cover and 2 screws. Tighten securely.

CARBURETOR ADJUSTMENTS

There is no screw for idle adjustment on your blower. The throttle lever is used to control engine speed. The throttle lever can be placed in one of four positions: STOP, IDLE

or , FULL THROTTLE or

, and one

intermittent position. If your enginewill not run properly or you require further assistance, contact an authorized service dealer or call 1--800--554--6723.


	WARNING: Perform the following		open flames from water heaters, electric
	WARNING: Perform the following		motors or switches, furnaces, etc.
steps after each use:		S	Store unit with all guards in place. Position
S	Allow engine to cool, and secure the unit		unit so that any sharp object cannot acci-
	before storing or transporting.		dentally cause injury.
S	Store unit and fuel in a well ventilated area	S	Store unit and fuel well out of the reach of
	where fuel vapors cannot reach sparks or		children.

-- 8 --

530163808 specifications

The Poulan 530163808 is a high-quality replacement chain designed for chainsaw enthusiasts and professionals who require durability and efficiency in challenging cutting conditions. Renowned for its performance, the 530163808 chain meets the needs of users looking for a reliable cutting tool for tree care, lumberjack tasks, or general woodwork.

One of the standout features of the Poulan 530163808 is its compatibility with a wide range of Poulan chainsaws, making it an excellent choice for those already invested in the Poulan ecosystem. This chain is engineered to provide a seamless fit and optimal performance, ensuring that users can efficiently replace worn-out chains with minimal hassle.

The Poulan 530163808 chain utilizes a unique cutting tooth design that enhances its cutting ability. Each tooth is crafted to achieve an efficient cutting angle, promoting faster and smoother cuts. This design not only increases productivity but also results in less strain on the chainsaw motor, which can lead to a longer lifespan for both the chain and the tool itself.

Another important characteristic of the Poulan 530163808 is its construction using high-quality materials. The chain is made of durable steel, providing a strong and resilient solution for heavy-duty cutting tasks. This material choice ensures that users can rely on the chain to withstand the rigors of continuous use in various environmental conditions, from dense forests to backyard pruning.

In addition to its robustness, the Poulan 530163808 features advanced processing techniques. The chain undergoes heat treatment, which influences its hardness and wear resistance, ultimately leading to prolonged life and reduced need for frequent replacements. This technology also helps maintain sharpness over time, allowing users to spend less time sharpening and more time cutting.

Overall, the Poulan 530163808 stands out as a top-tier replacement chain that embodies quality and performance. Whether for professional applications or personal projects, this chainsaw chain offers unmatched durability, efficiency, and compatibility. Chainsaw users can trust the Poulan 530163808 to help them tackle their cutting tasks with confidence and ease, ensuring that their tool remains in optimal working condition. With its innovative design and high-quality manufacturing, this chain is an investment in productivity and reliability for any woodcutting endeavor.