Poulan 530163808 Seasonal Storage, Fuel System, Troubleshooting Table Engine, Other

Page 9

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy stor- age.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or fuel storage container. Follow the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

TROUBLESHOOTING TABLE

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through

the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

SReplace your gasoline can if it starts to rust.

WARNING: Always stop unit and disconnect spark plug before performing any of the recommended remedies below other than remedies that require operation of the unit.

TROUBLE

 

CAUSE

REMEDY

Engine will not

1.

Engine flooded.

1. See “Starting a Flooded Engine”

start.

 

 

in Operation section.

 

2.

Fuel tank empty.

2. Fill tank with correct fuel mixture.

 

3.

Spark plug not firing.

3. Install new spark plug.

 

4.

Fuel not reaching

4. Check for dirty fuel filter; replace.

 

 

carburetor.

Check for kinked or split fuel line;

 

 

 

repair or replace.

 

5.

Compression low.

5. Contact an authorized service dealer.

Engine will not

1.

Fuel not reaching

1. Check for dirty fuel filter; replace.

idle properly.

 

carburetor.

Check for kinked or split fuel line;

 

 

repair or replace.

 

2.

Carburetor requires

 

2. Contact an authorized service dealer.

 

 

adjustment.

 

 

3.

Crankshaft seals worn.

3. Contact an authorized service dealer

 

4.

Compression low.

4. Contact an authorized service dealer.

Engine will not

1. Air filter dirty.

1. Clean or replace air filter.

accelerate,

2. Fuel not reaching

2. Check for dirty fuel filter; replace.

lacks power, or

 

carburetor.

Check for kinked or split fuel line;

dies under a

 

 

repair or replace.

3. Spark plug fouled.

3. Clean or replace spark plug

load.

 

 

and re-gap.

 

 

 

 

4. Carburetor requires

4. Contact an authorized service dealer.

 

 

adjustment.

5. Contact an authorized service dealer.

 

5. Carbon build up.

 

6. Compression low.

6. Contact an authorized service dealer.

Engine smokes

1. Choke partially on.

1. Adjust choke.

excessively.

2. Fuel mixture incorrect.

2. Empty fuel tank and refill with

 

3. Air filter dirty.

correct fuel mixture.

 

3. Clean or replace air filter.

 

4. Carburetor requires

4. Contact an authorized service dealer.

 

 

adjustment.

 

Engine runs hot.

1. Fuel mixture incorrect.

1. See “Fueling Engine” in Operation

 

 

 

section.

 

2. Spark plug incorrect.

2. Replace with correct spark plug.

 

3. Carburetor requires

3. Contact an authorized service dealer.

 

 

adjustment.

4. Contact an authorized service dealer.

 

4. Carbon build up.

-- 9 --

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 530163808 Manual de Instrucciones Manuel d’InstructionsPlan Ahead Know Your UnitHandle Fuel with CAUTION, IT is Highly Flammable Operate Your Unit SafelyVacuum BAG Assembly Blower Tube AssemblyMaintain Your Unit Properly HOW to Convert Unit from Vacuum USE to Blower USE Vacuum Tube AssemblyElbow Tube Small VacuumKnow Your Blower Shoulder Strap AdjustmentThrottle Lever Primer ButtonOperating Tips Operating PositionBefore Starting Engine Fueling Engine To Stop the EngineStarting a Warm Engine Starting a Cold EngineStarting a Flooded Engine General RecommendationsClean AIR Filter Inspect and Clean Unit and DecalsCarburetor Adjustments Replace Fuel FilterSeasonal Storage Troubleshooting Table EngineFuel System OtherPolicy of Electrolux Home Prod Electrolux Home PRODUCTS, INCNANCE, Replacement and Repair of Emission Related Parts Any GET Warranty Service Warranty ser

530163808 specifications

The Poulan 530163808 is a high-quality replacement chain designed for chainsaw enthusiasts and professionals who require durability and efficiency in challenging cutting conditions. Renowned for its performance, the 530163808 chain meets the needs of users looking for a reliable cutting tool for tree care, lumberjack tasks, or general woodwork.

One of the standout features of the Poulan 530163808 is its compatibility with a wide range of Poulan chainsaws, making it an excellent choice for those already invested in the Poulan ecosystem. This chain is engineered to provide a seamless fit and optimal performance, ensuring that users can efficiently replace worn-out chains with minimal hassle.

The Poulan 530163808 chain utilizes a unique cutting tooth design that enhances its cutting ability. Each tooth is crafted to achieve an efficient cutting angle, promoting faster and smoother cuts. This design not only increases productivity but also results in less strain on the chainsaw motor, which can lead to a longer lifespan for both the chain and the tool itself.

Another important characteristic of the Poulan 530163808 is its construction using high-quality materials. The chain is made of durable steel, providing a strong and resilient solution for heavy-duty cutting tasks. This material choice ensures that users can rely on the chain to withstand the rigors of continuous use in various environmental conditions, from dense forests to backyard pruning.

In addition to its robustness, the Poulan 530163808 features advanced processing techniques. The chain undergoes heat treatment, which influences its hardness and wear resistance, ultimately leading to prolonged life and reduced need for frequent replacements. This technology also helps maintain sharpness over time, allowing users to spend less time sharpening and more time cutting.

Overall, the Poulan 530163808 stands out as a top-tier replacement chain that embodies quality and performance. Whether for professional applications or personal projects, this chainsaw chain offers unmatched durability, efficiency, and compatibility. Chainsaw users can trust the Poulan 530163808 to help them tackle their cutting tasks with confidence and ease, ensuring that their tool remains in optimal working condition. With its innovative design and high-quality manufacturing, this chain is an investment in productivity and reliability for any woodcutting endeavor.
Top Page Image Contents