Poulan 530086577 Check Muffler Mounting Screws, Inspect Muffler and Spark Arresting Screen

Page 7
Holes
Mounting Screw

CHECK MUFFLER MOUNTING SCREWS

Once each year, ensure muffler mounting screws are secure and tightened properly to prevent damage.

Muffler Cover

Screws

SLoosen and remove the 2 screws from the

muffler cover.

SRemove the muffler cover.

STighten the 2 muffler mounting screws (100 in/lbs).

SReinstall muffler cover and 2 screws.

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

As the unit is used, carbon deposits build up on the muffler and spark arresting screen, and must be removed to avoid creating a fire hazard or affecting engine performance.

TOP VIEW OF MUFFLER

Exhaust

Diverter

Screws

Replace the spark arresting screen every 25 hours of operation or if any damage or breaks in the screen are noted.

NOTE: Do not attempt to clean the spark ar- resting screen.

SLoosen and remove the 2 screws from the muffler cover.

SRemove the muffler cover.

SLoosen and remove both screws from the

exhaust diverter.

SRemove the exhaust diverter and spark ar- resting screen.

SInstall new spark arresting screen.

SReinstall exhaust diverter and both screws.

Tighten screws securely.

SReinstall muffler cover and 2 screws. NOTE: If any part of the muffler is cracked, broken or damaged, we recommend that the muffler be replaced.

We recommend all service and adjustments not listed in this manual be performed by an authorized service dealer.

CARBURETOR ADJUSTMENTS

Your carburetor is equipped with limiter caps. Adjusting the carburetor is a complicated task. We recommend that you take your unit to an an authorized service dealer. Damage will occur if you turn the needles beyond the limiter stops.

WARNING: Perform the following steps after each use:

S Allow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

NEED ASSISTANCE?

Call: 1-800-554-6723.

NEED A SERVICE PART?

Contact your dealer.

-- 7 --

Image 7
Contents Manual de Instrucciones Manuel d’Instructions Operate Your Unit Safely Know Your UnitPlan Ahead Handle Fuel with CAUTION, IT is Highly FlammableAshtrays, etc Use only for jobs explained in this manual Blower Tube AssemblyVacuum BAG Assembly Maintain Your Unit ProperlyOperating Position Vacuum Tube AssemblyOperating Tips Blower Vacuum To Stop the EngineBefore Starting the Engine Starting a Warm EngineCheck for Loose Fasteners and Parts Inspect and Clean Unit and DecalsStarting a Flooded Engine General RecommendationsInspect Muffler and Spark Arresting Screen Carburetor AdjustmentsNeed a Service PART? Check Muffler Mounting ScrewsReplace screen Troubleshooting Table Cause RemedyMaintenance Placement and Repair of Emission Service Centers Call 554