Poulan 3450 manual Plan Ahead, Operate Your SAW Safely, Maintain Your SAW in Good Working Order

Page 2

WARNING: Always disconnect spark plug wire and place wire where it cannot contact spark plug to prevent accidental starting when setting up, transporting, ad- justing or making repairs except carburetor adjustments.

Because a chain saw is a high-speed wood- cutting tool, special safety precautions must be observed to reduce the risk of accidents. Careless or improper use of this tool can cause serious injury.

PLAN AHEAD

SRead this manual carefully until you com- pletely understand and can follow all safe- ty rules, precautions, and operating in- structions before attempting to use the unit.

Restrict the use of your saw to adult users who understand and can follow safety

rules, precautions, and operating instruc-S

tions found in this manual.

Hearing

 

 

 

Safety Hat

Protection

 

 

 

Eye

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Protection

Snug

 

 

 

 

 

 

 

 

 

 

 

Fitting

 

 

 

Heavy Duty

Clothing

 

 

 

 

 

 

 

 

 

 

Gloves

Safety

 

 

 

 

 

 

 

 

 

 

Safety Chaps

Shoes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SWear protective gear. Always use steel- toed safety footwear with non-slip soles; snug-fitting clothing; heavy-duty, non-slip gloves; eye protection such as non-fog- ging, vented goggles or face screen; an approved safety hard hat; and sound bar- riers (ear plugs or mufflers) to protect your hearing. Regular users should have hear- ing checked regularly as chain saw noise can damage hearing. Secure hair above

shoulder length.

S Keep all parts of your body away from the chain when the engine is running.

S Keep children, bystanders, and animals a minimum of 30 feet (10 Meters) away from the work area. Do not allow other people or animals to be near the chain saw when starting or operating the chain saw.

S Do not handle or operate a chain saw when you are fatigued, ill, or upset, or if you have taken alcohol, drugs, or medication. You must be in good physical condition and mentally alert. Chain saw work is strenuous. If you have any condi- tion that might be aggravated by strenu- ous work, check with your doctor before operating a chain saw.

2

S Carefully plan your sawing operation in advance. Do not start cutting until you have a clear work area, secure footing, and, if you are felling trees, a planned re- treat path.

OPERATE YOUR SAW SAFELY

S Do not operate a chain saw with one hand. Serious injury to the operator, help- ers, bystanders or any combination of these persons may result from one- handed operation. A chain saw is in- tended for two-handed use.

S Operate the chain saw only in a well-venti- lated outdoor area.

SDo not operate saw from a ladder or in a tree, unless you are specifically trained to do so.

Make sure the chain will not make contact

with any object while starting the engine.S

Never try to start the saw when the guide bar is in a cut.

S Do not put pressure on the saw at the end of the cut. Applying pressure can cause you to lose control when the cut is com- pleted.

S Stop the engine before setting the saw down.

S Be alert for springback when cutting a limb that is under tension so you will not be struck by the limb or saw when the ten- sion in the wood fibers is released.

MAINTAIN YOUR SAW IN GOOD WORKING ORDER

SHave all chain saw service performed by a qualified service dealer with the exception of the items listed in the maintenance sec- tion of this manual. For example, if im- proper tools are used to remove or hold the flywheel when servicing the clutch, structural damage to the flywheel can oc-

cur and cause the flywheel to burst.

S Make certain the saw chain stops moving when the throttle trigger is released. For correction, refer to “Carburetor Adjust- ments.”

S Never modify your saw in any way. Use only attachments supplied or specifically recommended by the manufacturer.

S Keep the handles dry, clean, and free of oil or fuel mixture.

S With the engine stopped, hand carry the chain saw with the muffler away from your body, and the guide bar and chain to the rear, preferably covered with a scabbard.

SKeep fuel and oil caps, screws, and fas- teners securely tightened.

Use only Poulan or Poulan Pro accesso- ries and replacement parts as recom-

mended.S

HANDLE FUEL WITH CAUTION

SDo not smoke while handling fuel or while operating the saw.

SEliminate all sources of sparks or flame in the areas where fuel is mixed or poured. There should be no smoking, open flames, or work that could cause sparks.

Allow engine to cool before refueling.

S Mix and pour fuel in an outdoor area on bare ground; store fuel in a cool, dry, well

Image 2
Contents 3450 3750 WCI Outdoor Products, IncMaintain Your SAW in Good Working Order Plan AheadOperate Your SAW Safely Handle Fuel with CautionMaintain Control KickbackReduce the Chance of Kickback Avoid Pinch---KickbackSpecial Notice Your saw is Kickback Safety Features Warning The following features areSafety Notice Exposure to Attaching the BAR & Chain Checking the tensionFueling Engine Adjusting the tensionMove switch to the Start or on position BAR and Chain LubricationChoke Lever Important PointsFor cold engine or warm engine after run- ning out of fuel For a warm engineImportant points Felling Large TreesCutting a Fallen Tree Types of Cutting Used for BuckingBucking Without a Support Bucking Using a LOG or Support StandMaintenance Schedule LimbingAIR Filter BAR MaintenanceCarburetor Adjustments Chain SharpeningPage Maintenance Placement and Repair of Emission Where to GETWarranty Service Warranty services To File a Claim