Sub-Zero 424G / 424FSG manual Alignment, Completion, MODEL WS-30INSTALLATION, Door Adjustment

MODEL WS-30 INSTALLATION

Alignment

DOOR ADJUSTMENT

The door can be adjusted in and out, side to side tilt and up and down.

To make adjustments, slightly loosening the two upper hinge bolts on the upper hinge plate using a 1/2" wrench. Refer to the illustration below.

In and out adjustment For a left-hinge door, using a

5/32" allen wrench, turn the adjustment bolt clockwise to bring the handle side of the door inward, and counterclock- wise to move the handle side outward. Reverse directions for a right-hinge door.

Side to side tilt adjustment For a left-hinge door, using a 3/8" wrench, turn the adjustment bolt clockwise to raise the handle side of the door, and counterclockwise to lower the handle side. Reverse directions for a right-hinge door.

Up and down adjustment For a left-hinge door, using a

1/4" allen wrench, turn the adjustment bolt clockwise to raise the door and counterclockwise to lower. Refer to the illustra- tion below. Reverse directions for a right-hinge door.

UPPER

HINGE BOLTS

Completion

GRILLE INSTALLATION

Install the grille assembly and check for proper fit. The grille is designed to rest on the upper door hinge to minimize the reveal between the top of the door and bottom of the grille. To eliminate interference, the grille height can be adjusted.

Loosen the four grille adjustment screws (two on each side) and adjust the grille height as needed. Refer to the illustra- tion below.

	GRILLE
BACK GRILLE	ADJUSTMENT
SCREW	SCREWS
	FRONT
GRILLE SCREW

Grille height adjustment.

IN-AND-OUT

ADJUSTMENT

SIDE-TO-SIDE

TILT ADJUSTMENT

Door adjustment bolts. Up and down door adjustment.

subzero.com 29