Sub-Zero 427G / 427RG, WS-30 Anti-TipBracket, 3/4 19. Refer to the illustration and chart below

MODEL 427G / 427RG SITE PREPARATION

Anti-Tip Bracket

WARNING

To prevent the unit from tipping forward, the anti-tip bracket must be installed.

The back of the anti-tip bracket must be installed 24" (610) from the front of the unit (without panels).

Use all anti-tip bracket hardware as instructed for wood or concrete floors.

IMPORTANT NOTE: For wood or concrete floor applications, if the #12 screws do not hit a wall stud or wall plate, use the #8 screws and #12 washers with the wall anchors.

IMPORTANT NOTE: In some installations the subflooring or finished floor may necessitate angling the screws used to fasten the anti-tip bracket to the back wall.

ANTI-TIP HARDWARE

1 Anti-tip bracket

12 #12 x 21/2" pan head screws

43/8"–16 x 33/4" wedge anchors

12#12 flat washers

4#8–18 x 11/4" truss head screws

4Nylon Zip-it®wall anchors

WOOD FLOOR

After properly locating the anti-tip bracket in the opening, drill pilot holes 3/16" (5) diameter maximum in the wall studs or wall plate. Use the #12 screws and washers to secure the brackets. Verify the screws penetrate through the flooring material and into wall studs or wall plate a minimum of

3/4" (19). Refer to the illustration and chart below.

CONCRETE FLOOR

After properly locating the anti-tip bracket in the opening, drill pilot holes 3/16" (5) diameter maximum in the wall studs or wall plate. Drill 3/8" (10) diameter holes into the concrete a minimum of 11/2" (38) deep. Use the #12 screws and washers to secure the brackets to the wall, and use the 3/8" wedge anchors to secure the brackets to the floor. Verify the screws penetrate wall studs or wall plate a minimum of 3/4" (19). Refer to the illustration and chart below.

ANTI-TIP BRACKET

MODEL	A
427G and 427RG	131/2" (343)

A	A
	FINISHED
	FLOORING
WALL PLATE
SUBFLOORING

WOOD FLOOR

A	A
	FINISHED
	FLOORING
WALL PLATE
SUBFLOORING
CONCRETE	11/2"(38)
FLOOR	min

Wood floor. Concrete floor.

subzero.com 13