Sub-Zero WS-30 manual Anti-TipBracket, Anti-tipbrackets 12 #12 x 21/2 pan head screws, Wood floor

MODEL WS-30 SITE PREPARATION

Anti-Tip Bracket

WARNING

To prevent the unit from tipping forward, the anti-tip brackets must be installed.

The two anti-tip brackets must be installed exactly 24"

(610)from the front of the opening to the back of the brackets and a minimum of 4" (102) from the sides of the opening. This depth will increase to 263/16" (665) for a flush inset installation, based on 3/4" (19) thick panels. Failure to properly position the anti-tip brackets will prevent proper engagement.

Use all anti-tip bracket hardware as instructed for wood or concrete floors.

IMPORTANT NOTE: For wood or concrete floor applications, if the #12 screws do not hit a wall stud or wall plate, use the #8 screws and #12 washers with the wall anchors.

IMPORTANT NOTE: In some installations the subflooring or finished floor may necessitate angling the screws used to fasten the anti-tip brackets to the back wall.

WOOD FLOOR

After properly locating the anti-tip brackets in the opening, drill pilot holes 3/16" (5) diameter maximum in the wall studs or wall plate. Use the #12 screws and washers to secure the brackets. Verify the screws penetrate through the flooring material and into wall studs or wall plate a minimum of 3/4" (19). Refer to the illustration below.

CONCRETE FLOOR

After properly locating the anti-tip brackets in the opening, drill pilot holes 3/16" (5) diameter maximum in the wall studs or wall plate. Drill 3/8" (10) diameter holes into the concrete a minimum of 11/2" (38) deep. Use the #12 screws and washers to secure the brackets to the wall, and use the 3/8" wedge anchors to secure the brackets to the floor. Verify the screws penetrate wall studs or wall plate a minimum of 3/4" (19). Refer to the illustration below.

ANTI-TIP HARDWARE

2 Anti-tip brackets

12 #12 x 21/2" pan head screws

43/8"–16 x 33/4" wedge anchors

12#12 flat washers

4#8–18 x 11/4" truss head screws

4Nylon Zip-it®wall anchors

24"

(610)

4" (102)

MIN

FINISHED

FLOORING

WALL PLATE

SUBFLOORING

WOOD FLOOR

	24"
	(610)
	4" (102)
	MIN
	FINISHED
	FLOORING
WALL PLATE
SUBFLOORING
CONCRETE	11/2"(38)
FLOOR	MINmin

Wood floor. Concrete floor.

24 Sub-Zero Customer Care 800.222.7820