Poulan 1420, 1630 Bucking Without a Support, Bucking Using a LOG or Support Stand

Page 10

reenter the cut. Do not use a metal wedge. Do not attempt to restart your saw when it is pinched or hung in a log.

Use a wedge to remove pinched saw.

Turn saw OFF and use a plastic or wooden wedge to force cut open.

Overcutting begins on the top side of the log with the bottom of the saw against the log. When overcutting use light downward pressure.

Overcutting

Undercutting

Undercutting involves cutting on the underside of the log with top of saw against the log. When undercutting use light upward pressure. Hold saw firmly and maintain control. The saw will tend to push back toward you.

WARNING: Never turn saw upside down to undercut. The saw cannot be controlled in this position.

Always make your first cut on the com- pression side of the log. The compres- sion side of the log is where the pressure of the log’s weight is concentrated.

First cut on compression side of log

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A SUPPORT

SOvercut through 1/3 of the diameter of the log.

SRoll the log over and finish with a sec-

ond overcut.

S Watch for logs with a compression side. See illustration above for cutting logs with a compression side.

BUCKING USING A LOG OR SUPPORT STAND

SRemember your first cut is always on the compression side of the log. (Refer to the illustrations for your first and second cut)

SYour first cut should extend 1/3 of the

diameter of the log.

SFinish with your second cut.

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand

2nd Cut

1st Cut

1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the mov- ing chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on lad- ders, platforms, a log, or in any position which can cause you to lose your bal- ance or control of the saw.

IMPORTANT POINTS

S Watch out for springpoles. Spring- poles are small size limbs which can whip toward you or pull you off bal- ance. Use extreme caution when cut- ting small size limbs.

S Be alert for springback from any branches that are bent or under pres- sure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Frequently clear branches out of the way to avoid tripping over them.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Español FrançaisPlan Ahead Safety RulesOperate Your SAW Safely Maintain Your SAW in GoodElectrical Safety Authorized service dealerChain Saw is driven straight back toward the operatorReduce the Chance Kickback Maintain ControlKickback Safety Features CursAssembly AssemblyCarton Contents Double Insulation ConstructionOperation Stopping Your SAW Cutting MethodsBefore Starting SAW Guide BAR and Chain OIL Starting Your SAWCutting a Fallen Tree Bucking Felling Large TreesNotch CUT and Felling Tree Important PointsBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points Maintenance Check Chain Sharpness Check for Loose Fasteners and PartsCheck Chain Tension Check Guide BARService and Adjustments Storage Chain AdjustmentCustomer Serviceable Parts Seasonal StorageTroubleshooting Table Cause Remedy Warranty Statement

1420, 1630 specifications

The Poulan 1420 and 1630 are noteworthy chainsaw models designed to cater to the needs of both homeowners and occasional users, providing efficient and reliable cutting performance. These chainsaws are part of Poulan's renowned lineup, reflecting the brand's commitment to quality and innovation.

The Poulan 1420 is equipped with a powerful 14-inch bar and a lightweight design, making it perfect for light trimming, pruning, and small to medium-sized tasks around the yard. One of its main features is the easy-access air filter, which enhances maintenance convenience and prolongs the life of the engine. The 1420 runs on a 33 cc two-stroke engine, delivering impressive power for its size. Its automatic oiling system ensures that the chain operates smoothly, reducing wear and tear and improving cutting performance.

In addition, the Poulan 1420 boasts an ergonomic handle design for enhanced comfort during extended use. This model is also equipped with a chain brake system that adds an extra layer of safety, allowing the operator to stop the chain quickly in case of an emergency. The lightweight nature of the chainsaw makes it easy to maneuver, making it a favorite among those new to using power tools.

On the other hand, the Poulan 1630 extends capabilities with its 16-inch bar, ideal for larger cutting tasks. This model features a more powerful 40 cc engine, providing robust cutting capabilities that can handle firewood cutting, thicker branches, and larger trees. Like the 1420, the 1630 also supports an automatic oiling system and an easy-access air filter for hassle-free maintenance.

The Poulan 1630 offers additional features like a heavy-duty chain for increased durability, ensuring it can withstand rigorous use. Its ergonomic design continues to be a strong focus, allowing users to work more comfortably and efficiently. Moreover, both models incorporate Poulan’s signature Easy Start technology, which helps reduce the effort needed to start the engine, making operation seamless.

In conclusion, both the Poulan 1420 and 1630 chainsaws are excellent choices for those who seek a blend of performance, reliability, and safety in their outdoor equipment. Whether for light yard work or heavier cutting tasks, these chainsaws are equipped with features that will meet the needs of varied users, promoting ease of use and long-lasting durability. With Poulan's reputation for producing quality products, these models stand out in the competitive chainsaw market.
Top Page Image Contents